Answer Solutions Specification Guide - OEC Business Interiors

Universal Freestanding Worksurfaces30" Radius Corner, Straight-Front and Curved-Front WorksurfacesCorner worksurfacesare the basic building blocksof a variety of workstationconfigurations, and are deepenough to accommodate acomputer monitor andkeyboard.cSpecifying 30" radius corner,straight-front worksurfaces,page 398cSpecifying 30" radius corner,curved-front worksurfaces,page 399Worksurface has a woodcore with a laminate or woodveneer surface and is 1 3 ⁄16"thick.Edge profile is continuousaround all edges of theworksurface.C D C DA B A BEEActual Dimensions30" Radius Corner, Straight-Front WorksurfacesA B C D E24" 24" 41 3 ⁄4" 41 3 ⁄4" 25"24" 24" 47 3 ⁄4" 47 3 ⁄4" 34"30" 30" 47 3 ⁄4" 47 3 ⁄4" 25"30" Radius Corner, Curved-Front WorksurfacesA B C D E24" 24" 41 3 ⁄4" 41 3 ⁄4" 25"24" 24" 47 3 ⁄4" 47 3 ⁄4" 34". 30" 30" 47 3 ⁄4" 47 3 ⁄4" 25"30" radius corner isideal for corner applicationsor as a unique freestandingshape, suitable for laptopsand flat screens.30" Radius Corner, Straight-FrontRadius corner eliminatessharp edges and is appropriatefor freestanding, mobilefurniture.30" Radius Corner, Curved-FrontProduct DetailsLaminate Worksurfaces3 /8"P-edge profile risesslightly above the laminatesurface and curves into a3⁄8" radius which optimizesergonomic benefit for theuser.Edge is available in sixvinyl (plastic) colors. Vinyl(plastic) color is specifiedseparately from laminatecolor.Wood VeneerWorksurfacesSquare (3 mm) Taperededge profile edge profile3 /8"P-edge profileEdges of worksurfacesare available in three profiles—square(3 mm),tapered, and P-edge.Square (3 mm) edgeprofile is achieved byadding wood veneer surfacesto worksurface core.This technique can beapplied to worksurfaces thatare straight or curved...156 Answer Solutions Specification Guide