Answer Solutions Specification Guide - OEC Business Interiors

Universal Systems WorksurfacesBubble Jetty WorksurfacesBubble jetty worksurfacesallow an extendedrange of workstation layoutsand enable collaboration.cSpecifying bubble jettyworksurfaces, page 373Worksurface has awood core with a laminate orwood veneer surface and is1 3 ⁄16" thick.Bubble JettyFront (user’s) edge isavailable in two edge profileson laminate worksurfaces.Wood veneer worksurfaceshave a square (3 mm) edgeprofile only. Back and sideedges are flat.BATip: Left-hand unit shown. Right-hand unit available.Actual DimensionsA B23 1 ⁄2" 30"23 1 ⁄2" 36"23 1 ⁄2" 42"23 1 ⁄2" 48". Tip: For P-edge worksurfaces, add 3 ⁄8" to dimension A.Product DetailsLaminate WorksurfacesFront (user’s) edgeprofile is available in twoshapes.3 mm P-edgeedge profile edge profileBoth edge profiles arevinyl (plastic), and are specifiedseparately from laminatecolor. Back and sideedges are flat.P-edge profile risesslightly above the laminatesurface and curves into a3 ⁄8" radius which optimizesergonomic benefit for theuser.Wood VeneerWorksurfacesFront (user’s) edge profileis wood veneer with asquare (3 mm) radius. Backedge and edge that joinsto adjacent worksurfacesare flat. Wood edge colormatches finish specified forworksurface.Edge profile is applied tofront (user’s) edge only.3 /8"P-edge profile worksurfacedepths are 3 ⁄8"deeper than 3 mm edge profileworksurfaces in order toprovide a flush interface withproud-front pedestals...126 Answer Solutions Specification Guide