Answer Solutions Specification Guide - OEC Business Interiors

Universal Systems WorksurfacesJetty, Straight-Front and Curved-Front WorksurfacesStraight-front jetty isrecommended for use withstraight-front corner andextended corner worksurfaces.Use curved-front jettyin applications with curvedfrontcorner and extendedcorner worksurfaces.cSpecifying jetty, straightfrontworksurfaces, page 371cSpecifying jetty, curved-frontworksurfaces, page 372Worksurface has awood core with a laminate orwood veneer surface and is1 3 ⁄16" thick.Jetty, Curved-FrontCCAADDBBTip: Left-hand units shown. Right-hand units available.Actual DimensionsJetty, Straight-Front and Curved-Front WorksurfacesA B C D30" 23 1 ⁄2" 65 1 ⁄2" 48"30" 23 1 ⁄2" 71 1 ⁄2" 48"30" 23 1 ⁄2" 77 1 ⁄2" 48"30" 29 1 ⁄2" 65 1 ⁄2" 48"30" 29 1 ⁄2" 71 1 ⁄2" 48"30" 29 1 ⁄2" 77 1 ⁄2" 48". Tip: For P-edge worksurfaces, add 3 ⁄8" to dimension D.Front (user’s) edge isavailable in two edge profileson laminate worksurfaces.Wood veneer worksurfaceshave a square (3 mm) edgeprofile only. Back edge is flat.Jetty, Straight-FrontCable scallop allowscords and cables to passbehind the worksurface.Worksurfaces are standardwith one cable scallop centeredalong the back edge.Cable scallop can beomitted as an option.Product DetailsLaminate WorksurfacesFront (user’s) edgeprofile is available in twoshapes.3 mm P-edgeedge profile edge profileBoth edge profiles arevinyl (plastic), and are specifiedseparately from laminatecolor. Back and sideedges are flat..P-edge profile risesslightly above the laminatesurface and curves into a3 ⁄8" radius which optimizesergonomic benefit for theuser.Wood VeneerWorksurfacesFront (user’s) edge profileis wood veneer with asquare (3 mm) radius. Backedge and edge that joinsto adjacent worksurfacesare flat. Wood edge colormatches finish specified forworksurface.Edge profile is applied tofront (user’s) edge only...124 Answer Solutions Specification Guide