Answer Solutions Specification Guide - OEC Business Interiors

Universal Systems WorksurfacesBullet Peninsula, Straight-Front and Curved-Front WorksurfacesPeninsula worksurfacesallow an extended range of layoutsand enable collaboration.cSpecifying bullet peninsula,straight-front worksurfaces,page 367cSpecifying bullet peninsula,curved-front worksurfaces,page 368Worksurface has awood core with a laminate orwood veneer surface and is1 3 ⁄16" thick.BBAAActual DimensionsBullet Peninsula, Straight-Front andCurved-Front WorksurfacesA B30" 59 1 ⁄2"30" 65 1 ⁄2"30" 71 1 ⁄2". Tip: Straight-front worksurfaces are available in laminate only.Bullet Peninsula,Straight-Front WorksurfaceBullet Peninsula,Curved-Front WorksurfaceFront (user’s) edge isavailable in two edge profileson laminate worksurfaces.Wood veneer worksurfaceshave a square (3 mm) edgeprofile only. Back edge isflat.Cable scallop allowscords and cables to passbehind the worksurface.Worksurfaces are standardwith one cable scallop centeredalong the back edge.Cable scallop can beomitted as an option.Product DetailsLaminate WorksurfacesFront (user’s) edgeprofile is available in twoshapes.3 mm P-edgeedge profile edge profileBoth edge profiles arevinyl (plastic), and are specifiedseparately from laminatecolor. Back and sideedges are flat.P-edge profile risesslightly above the laminatesurface and curves into a3 ⁄8" radius which optimizesergonomic benefit for theuser.Wood VeneerWorksurfacesFront (user’s) edge profileis wood veneer with asquare (3 mm) radius. Backedge and edge that joinsto adjacent worksurfacesare flat. Wood edge colormatches finish specified forworksurface.Edge profile is applied tofront (user’s) edge only...120 Answer Solutions Specification Guide