Answer Solutions Specification Guide - OEC Business Interiors

Universal Systems WorksurfacesSpanner WorksurfacesSpanner worksurfacesenable collaboration andconferencing.cSpecifying spannerworksurfaces, page 366Worksurface has a woodcore with a laminate or woodveneer surface and is 1 3 ⁄16"thick.Front (user’s) edge isavailable in two edge profileson laminate worksurfaces.Wood veneer worksurfaceshave a square (3 mm) edgeprofile only. Edge that joins toadjacent worksurface is flat.Notch is included on spannerworksurfaces and is a specificsize for Answer panels.Notch is not included onspanner worksurfaces forfreestanding applicationswithout panels.BBAAActual DimensionsFor Freestanding ApplicationsA B29 1 ⁄2" 47"35 1 ⁄2" 59"For Panel-Supported ApplicationsA B31 1 ⁄2" 51"37 1 ⁄2" 63"Tip: For P-edge worksurfaces, add 3 ⁄8" to dimension A and. 3 ⁄4" to dimension B.Freestanding SpannerPanel-Supported SpannerProduct DetailsLaminate WorksurfacesFront (user’s) edgeprofile is available in twoshapes.3 mm P-edgeedge profile edge profileBoth edge profiles arevinyl (plastic), and are specifiedseparately from laminatecolor. Back and sideedges are flat.P-edge profile risesslightly above the laminatesurface and curves into a3 ⁄8" radius which optimizesergonomic benefit for theuser.Wood VeneerWorksurfacesFront (user’s) edge profileis wood veneer with asquare (3 mm) radius. Backedge and edge that joinsto adjacent worksurfacesare flat. Wood edge colormatches finish specified forworksurface.Edge profile is applied tofront (user’s) edge only...118 Answer Solutions Specification Guide