Answer Solutions Specification Guide - OEC Business Interiors

Universal Systems WorksurfacesCorner, Straight-Front andCurved-FrontWorksurfacesCorner, straight-frontworksurfaces are availablewith an adjustablekeyboard shelf.Release lever activatescontinuous adjustmentof keyboard surface.KeyboardMonitor6 1 /2"4 1 /2"FloorKeyboard shelf is supportedby a single arm springmechanism that allows it toadjust to positions up to 6 1 ⁄2"higher or 4 1 ⁄2" lower than themonitor worksurface.Keyboard surface tiltswith a range of 25°. Negativetilt is reduced at lower keyboardshelf heights.1 1 /2"1"One-inch space separatessides of the keyboardand monitor surfaces to preventpinching. One and onehalfinch separates the back...ConnectionsWorksurfaces can beused freestanding or in panelsupportedinstallations.Supports are orderedseparately and installed inthe field.For panel-supportedinstallations you can use:• Side support brackets• Cantilever with tie plate• End panel• Standing-height end panel• Support plate• Center support panel withtie plate• Standing-height centersupport panel with tie platecSee page 136 forWorksurface Supports.• Universal pedestal withfillercPage 229For freestanding installationsyou can use:• Single post leg• Single post leg with caster• Nesting post leg• Nesting post leg with caster• Double post leg• Double post C-leg• Support platecSee page 138 for Legsand Supports for SystemsWorksurfaces.Reinforcing channel(TS7WKSPT) is used toreinforce all worksurfaceswith 60" or more of unsupportedkneespace.cPage 137.Wiring & Cabling1 /2"Worksurface depth is1 ⁄2" less than nominal andallows cords and cables topass over at any point. Cablescallops provide space forplugs to pass over the backedge of the worksurface.1"Cable scallop includes aplastic insert. On laminateworksurfaces, plastic color isdetermined by the color youspecify for the edges. Onwood veneer worksurfaces,cable scallop is available inblack plastic only.cSee page 606 for scallopcolor defaults.12 1 /2"5"12 1 /2"Cable scallops arelocated 12 1 ⁄2" from the rearcorner of the worksurface tothe center of the scallop.Cable scallop can beomitted for freestandingapplications or panel-supportedapplications whereplugs do not need to passover the back edge of theworksurface..Cable managementdevices are available tohelp manage conventionaland fiber-optic cablesbeneath the worksurface.cSee page 205,Worksurface Power andCommunicationSurface MaterialsLaminate Worksurfaces• Laminate• Accent laminate (option)A family of pre-approved,non-Steelcase laminatesthat reflect the latest trendsin color.cSee Surface MaterialsReference Manual.• Open Line laminate(option)A program including non-Steelcase laminates whichare suitable for use onSteelcase products.cSee Surface MaterialsReference Manual.Front (user’s) edge(s)• Vinyl (plastic)Back and side edges• Plastic color default tomatch user’s edgeCable scallop• Plastic color default tocomplement user’s edgeWood VeneerWorksurfaces• Wood veneer (standard)• Customiz stain (option)• Full-fill finish (option)Square (3 mm) edgeprofile• Wood veneer to matchworksurfaceFront (user’s) edge(s)• Wood edge bandCable scallop• Plastic: black onlyApplication Topics15"15"43 1 /2"Screens mount to worksurfacesin privacy position orbelow the worksurface formodesty.cSee page 199 for Screens.Worksurfaces usedin panel-supportedinstallations must followapplicable panel stabilityguidelines.cPage 47ShippingPalletizing streamlinesunloading and staging ofworksurfaces. Identicalworksurfaces ordered on thesame line item are packedon pallets containing 10–20worksurfaces. Remainingworksurfaces are packedindividually in cartons. If palletizingis not desired, orderin quantities of nine or lessper line item. For maximumunload efficiency, utilizepallet handling equipment atjob site whenever possible.Wood veneer worksurfacescannot be palletized...WorksurfacesAnswer Solutions Specification Guide 111