MFP Server User Manual - LevelOne

More documents

Recommendations

Info

Procedure B: Using the Server’s Web Pages1. Power on the Server. Suppose that the Server is in DHCP mode.2. Check the Server's IP address.3. First, run Control Center. It will automatically search for Servers on the LAN. ThenServers’ IP addresses will be shown in Control Center.4. Run any Web browser, like Microsoft Internet Explorer. Go to “http://Server’s IPaddress “or “http://Server’s Host Name” to access the Server's home page.5. Click CONFIG at the top of the menu.6. Login the Server with Administrator (default: admin) and Password (default: admin).7. Click Maintenance.8. Click Upgrade Firmware.9. Click Browse button to choose the file of new firmware.10. Click Upload button to start firmware upgrade.11. Wait for 15 seconds for system reboot.58
8. Restore Factory DefaultsUser may restore the factory default parameters by one of the following methods.Using the Control Center Utility1. Start the Control Center.2. If the tool finds Servers in your local area network, then you have to select a Serverfrom the Server List.3. Double click the highlight list and enter the Server’s administrator (default: admin) andpassword (default: admin).4. After you have logged in successfully, from the Server menu, select Maintenance. TheMaintenance dialog appears.5. Click Factory Default.Using the Server’s Web Pages1. Go to the Server’s web page and click CONFIG2. Enter administrator (default: admin) and password (default: admin).3. Click Maintenance.4. Click Factory Default.59
Page 1 and 2:
LevelOneFUS-3100 / FPS-3003 / WUS-3
Page 3 and 4:
Table of ContentsINTRODUCTION .....
Page 5 and 6:
8. RESTORE FACTORY DEFAULTS .......
Page 7 and 8: 1. Product OverviewPackage Contents
Page 9 and 10: 2. Basic InstallationConnecting the
Page 11 and 12: 3. If the tool finds multiple MFP S
Page 13 and 14: Setting the IP Address Using MFP Se
Page 15 and 16: Wireless configurationPreliminary
Page 17 and 18: • When login successfully, from t
Page 19 and 20: Set Wireless Configuration Using MF
Page 21 and 22: • If the wireless network is secu
Page 23 and 24: 3. Using the MFP ServerIntroduction
Page 25 and 26: Please see below steps for USB prin
Page 28 and 29: D. Choose the desired printer. The
Page 30 and 31: E. Then the “Scanner Wizard” wi
Page 32 and 33: Manual-Connect / Auto-Connect FaxSo
Page 34 and 35: F. Try to issue a print job to the
Page 36 and 37: 4. The Control Center UtilityThis c
Page 38 and 39: General Configuration• Set Host I
Page 40 and 41: User Account ListUser Name & Passwo
Page 42 and 43: Quitting the Control Center Utility
Page 44 and 45: Storage NamesThe local drives of th
Page 46 and 47: 5. Select the codepage form File Se
Page 48 and 49: Setting up File Server Using the Co
Page 50 and 51: Setting up File Server Using Web Pa
Page 52 and 53: have to enter user name and passwor
Page 54 and 55: 6. MFP Server’s Web PagesIntroduc
Page 56 and 57: • Maintenance If you want to rest
Page 60 and 61: 5. Click Yes to confirmUsing Init B
Page 62 and 63: 9. The Init ButtonThe Init button i
show all

MFP Server User Manual - LevelOne

Create successful ePaper yourself

Delete template?

Save as template?