MFP Server User Manual - LevelOne

More documents

Recommendations

Info

have to enter user name and password to login to the Server. You can add user nameand password in User Account box by the Control Center or the Server’s Web page.NoteIf you use SMB on Windows 98 SE/ME, you must login to your Windows 98SE/ME using the same user name as in the Server’s User Account.9. The shared folders will be listed as USB1_DyPz, and USB2_DyPz where Dy representsthe y-th disk and Pz represents the z-th partition with respect to USB1 port and USB2port.10. Perform Open, Paste, Remove or Copy the files to the shared folders.NoteAnother way to use shared storages by SMB/CIFS method: In Control Centerutility, click the “Network Storage” button, as the following figure.52
Using Shared Storage by FTP Methods for WindowsUse Microsoft IE to the shared USB Mass Storages1. Open Microsoft IE2. In Web Address List, enter command: “ftp://Server’s Server Name“ or “ftp://Server’s IPaddress”. If you have changed the default FTP port: 21 to the new value, you have toadd the new port number in the tail of command as “ftp://Server’s Server Name: ftp port”or “ftp://Server’s IP address: ftp port”.3. If user sets the Enable Server Authentication in FTP server protocol settings usermust enter user name and password to login to the Server; if set Allow AnonymousLogin, user can use the user name “anonymous” to login with Read-only permission. Ifuser clear Server authentication, there is no username or password request for logininto the Server. User is allowed to add user name and password in User Account boxby the Control Center Utility or the Server’s Web pages.4. The shared folders will be listed in IE.5. Perform Paste, Remove or Copy the files to the shared folders.Use Microsoft Dos’s FTP client1. Enter Dos command as “ftp”2. Enter “open server’s Server Name” or “open server’s IP address”. If you have changedthe default FTP port : 21 to the new value, you have to add the new port number in thetail of command as “open server’s Server Name ftp port” or “open server’s IP addressftp port” .3. If user sets the Enable Server Authentication in FTP server protocol settings user mustenter user name and password to login to the Server; if set Allow Anonymous Login,user can use the user name “anonymous” to login with Read-only permission. If userclear Server authentication, there is no username or password request for login into theServer. User is allowed to add user name and password in User Account box by theControl Center Utility or the Server’s Web pages.4. Perform FTP commands to use this FTP server.53
Page 1 and 2: LevelOneFUS-3100 / FPS-3003 / WUS-3
Page 3 and 4: Table of ContentsINTRODUCTION .....
Page 5 and 6: 8. RESTORE FACTORY DEFAULTS .......
Page 7 and 8: 1. Product OverviewPackage Contents
Page 9 and 10: 2. Basic InstallationConnecting the
Page 11 and 12: 3. If the tool finds multiple MFP S
Page 13 and 14: Setting the IP Address Using MFP Se
Page 15 and 16: Wireless configurationPreliminary
Page 17 and 18: • When login successfully, from t
Page 19 and 20: Set Wireless Configuration Using MF
Page 21 and 22: • If the wireless network is secu
Page 23 and 24: 3. Using the MFP ServerIntroduction
Page 25 and 26: Please see below steps for USB prin
Page 28 and 29: D. Choose the desired printer. The
Page 30 and 31: E. Then the “Scanner Wizard” wi
Page 32 and 33: Manual-Connect / Auto-Connect FaxSo
Page 34 and 35: F. Try to issue a print job to the
Page 36 and 37: 4. The Control Center UtilityThis c
Page 38 and 39: General Configuration• Set Host I
Page 40 and 41: User Account ListUser Name & Passwo
Page 42 and 43: Quitting the Control Center Utility
Page 44 and 45: Storage NamesThe local drives of th
Page 46 and 47: 5. Select the codepage form File Se
Page 48 and 49: Setting up File Server Using the Co
Page 50 and 51: Setting up File Server Using Web Pa
Page 54 and 55: 6. MFP Server’s Web PagesIntroduc
Page 56 and 57: • Maintenance If you want to rest
Page 58 and 59: Procedure B: Using the Server’s W
Page 60 and 61: 5. Click Yes to confirmUsing Init B
Page 62 and 63: 9. The Init ButtonThe Init button i

MFP Server User Manual - LevelOne

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?