MFP Server User Manual - LevelOne

More documents

Recommendations

Info

Setting up File Server Using Web Pages1. Go to the web page, click CONFIG2. Login your administrator (default: admin) and password (default: admin).3. After you have logged in successfully, click Supported Protocols.4. Set up File Server Configuration:Set SMB/CIFS Print/File Server• Enable SMB/CIFS Print/File Server: select the item, if you want to supportSMB/CIFS print/File server.• Enable Internet Access: uncheck the box; accessing SMB/CIFS server throughthe Internet will be disabled. If user selects the item, it will allow Internet users toaccess the storage using the SMB/CIFS protocol.• Enable Server Authentication: Select the item, if user wants to share the50
storage with user level security which requires user name and password to login.If this function is disabled, the storage will be shared without any security.Set FTP Server:• Enable FTP Server: select the item, if user wants to support FTP server.• FTP port: enter the desired FTP port. The default value is 21.• Maximum Session Number: select the item and fill in desired number.• Enable Passive Mode: select the item, if user wants to allow FTP server canaccept passive mode command.• Enable Server Authentication: check the box, if user wants to share thestorage with user level security which requires user name and password to login.If uncheck the item, the storage will be shared without security access.• Allow Anonymous Login: select the item, it will allow user “anonymous” tologin the FTP server with read-only permission and the Server will not check thepassword. If the box is unchecked, the FTP server will not support anonymouslogin function.• Storage Access Mode: To use FTP and SMB/CIFS to access storage, pleaseset the storage access mode to the server mode. For the NetUSB mode, pleaserefer to chapter 9.Using Shared Storages by SMB/CIFS Method for Windows1. Connect a USB storage device to this product.2. Select My Network Places3. Click Display the Computers of Workgroup4. Double click Microsoft Windows Network icon.5. Double click the Workgroup that the Server belongs to. The default Workgroup name is“WORKGROUP”. Please refer to Control Center utility or the Server’s web pages.6. If the Workgroup name of the Server in Microsoft Windows Network cannot be found,please select Search for Computer… in My Network Places and enter the ServerName of the Server to discover it.7. Double click the Server Name icon.8. If you clear Enable SMB/CIFS Print/File Server Authentication in SupportedProtocols, you login to the SMB server without requiring authentication; otherwise you51
Page 1 and 2: LevelOneFUS-3100 / FPS-3003 / WUS-3
Page 3 and 4: Table of ContentsINTRODUCTION .....
Page 5 and 6: 8. RESTORE FACTORY DEFAULTS .......
Page 7 and 8: 1. Product OverviewPackage Contents
Page 9 and 10: 2. Basic InstallationConnecting the
Page 11 and 12: 3. If the tool finds multiple MFP S
Page 13 and 14: Setting the IP Address Using MFP Se
Page 15 and 16: Wireless configurationPreliminary
Page 17 and 18: • When login successfully, from t
Page 19 and 20: Set Wireless Configuration Using MF
Page 21 and 22: • If the wireless network is secu
Page 23 and 24: 3. Using the MFP ServerIntroduction
Page 25 and 26: Please see below steps for USB prin
Page 28 and 29: D. Choose the desired printer. The
Page 30 and 31: E. Then the “Scanner Wizard” wi
Page 32 and 33: Manual-Connect / Auto-Connect FaxSo
Page 34 and 35: F. Try to issue a print job to the
Page 36 and 37: 4. The Control Center UtilityThis c
Page 38 and 39: General Configuration• Set Host I
Page 40 and 41: User Account ListUser Name & Passwo
Page 42 and 43: Quitting the Control Center Utility
Page 44 and 45: Storage NamesThe local drives of th
Page 46 and 47: 5. Select the codepage form File Se
Page 48 and 49: Setting up File Server Using the Co
Page 52 and 53: have to enter user name and passwor
Page 54 and 55: 6. MFP Server’s Web PagesIntroduc
Page 56 and 57: • Maintenance If you want to rest
Page 58 and 59: Procedure B: Using the Server’s W
Page 60 and 61: 5. Click Yes to confirmUsing Init B
Page 62 and 63: 9. The Init ButtonThe Init button i

MFP Server User Manual - LevelOne

Create successful ePaper yourself

Delete template?

Save as template?