MFP Server User Manual - LevelOne

More documents

Recommendations

Info

How to UseDriver InstallationThis section will describe how to use the new technology of MFP Server to do driver installationfor a USB device. Before the installation, please make sure that the PC can access the MFPserver via TCP/IP. The simplest way to do this is using “Control Center” to search for the MFPserver on the network and change its IP address to be the same subnet as the PC. If the MFPserver and the PC are not in the same TCP/IP subnet, Control Center will show the MFP serverin green, as the following figure. User must change the IP address (or using DHCP) of the MFPserver so that the MFP server and user’s PC are in the same subnet. When Control Centershows the MFP servers in blue, meaning user can now safely access the MFP server.24
Please see below steps for USB printer or USB Multifunction printer driver installation.A. Power on the MFP server and switch on the USB device.B. Connect the USB device to MFP server. The LED of the USB port will light-on.C. Run the Control Center. In the “MFP Server List” window, user is able to see the host namesand IP address of the MFP server (in blue) on the network, as the following figure.D. Click the MFP server. Then the USB device attached on the server will be shown.E. Please prepare to refer to the USB device’s user manual for driver installation.F. Click the desired USB device from the Control Center utility list and then click the“Connect” button to do the connect operation and get the ownership of the USB device, asthe following figure. The computer name of the device owner will be shown at the end of thedevice.25
Page 1 and 2: LevelOneFUS-3100 / FPS-3003 / WUS-3
Page 3 and 4: Table of ContentsINTRODUCTION .....
Page 5 and 6: 8. RESTORE FACTORY DEFAULTS .......
Page 7 and 8: 1. Product OverviewPackage Contents
Page 9 and 10: 2. Basic InstallationConnecting the
Page 11 and 12: 3. If the tool finds multiple MFP S
Page 13 and 14: Setting the IP Address Using MFP Se
Page 15 and 16: Wireless configurationPreliminary
Page 17 and 18: • When login successfully, from t
Page 19 and 20: Set Wireless Configuration Using MF
Page 21 and 22: • If the wireless network is secu
Page 23: 3. Using the MFP ServerIntroduction
Page 28 and 29: D. Choose the desired printer. The
Page 30 and 31: E. Then the “Scanner Wizard” wi
Page 32 and 33: Manual-Connect / Auto-Connect FaxSo
Page 34 and 35: F. Try to issue a print job to the
Page 36 and 37: 4. The Control Center UtilityThis c
Page 38 and 39: General Configuration• Set Host I
Page 40 and 41: User Account ListUser Name & Passwo
Page 42 and 43: Quitting the Control Center Utility
Page 44 and 45: Storage NamesThe local drives of th
Page 46 and 47: 5. Select the codepage form File Se
Page 48 and 49: Setting up File Server Using the Co
Page 50 and 51: Setting up File Server Using Web Pa
Page 52 and 53: have to enter user name and passwor
Page 54 and 55: 6. MFP Server’s Web PagesIntroduc
Page 56 and 57: • Maintenance If you want to rest
Page 58 and 59: Procedure B: Using the Server’s W
Page 60 and 61: 5. Click Yes to confirmUsing Init B
Page 62 and 63: 9. The Init ButtonThe Init button i

MFP Server User Manual - LevelOne

Create successful ePaper yourself

Delete template?

Save as template?