MFP Server User Manual - LevelOne

More documents

Recommendations

Info

Host Names and Host Name RulesThe default Host Name of the MFP Server is “FUS-3100”, “FPS-3003” or “WUS-3200”, dependon the model user has purchased.If user installs two or more MFP Servers with same model type in the local area network, to avoidconflict by using the same Host Name, user should change the Host Name by using the ControlCenter or access to the MFP Server’s web pages. The Host Name should be no longer than 15characters.Setting the IP Address Using DHCPFollow the instructions below to get an IP address using DHCP:1. Edit or create a scope in the DHCP manager of the DHCP daemon. The entries includedin this scope should contain the following parameters:• range of IP addresses• subnet mask• default router IP address• DNS server IP address• lease duration2. Activate the scope. MFP Server automatically gets the DHCP parameters. If user is usingDNS, it should include at least one DNS server IP address in the DHCP scope or manuallyset the DNS server IP address using MFP Server’s web pages or the Control Center.Setting the IP Address Using the Control Center1. Install the Control Center. The Control Center is available in the Product CD. Follow theon-screen display to complete the Control Center installation.2. Start the Control Center and Auto-searching MFP Server window will appear.10
3. If the tool finds multiple MFP Servers in the local area network, user has to select one ofthe MFP Servers from the Server List.4. Double click the highlight list and enter the MFP Server’s administrator (default: admin)and password (default: admin).5. After logged in successfully, select TCP/IP from the MFP Server menu. IP Addresssetting dialog appears.11
Page 1 and 2: LevelOneFUS-3100 / FPS-3003 / WUS-3
Page 3 and 4: Table of ContentsINTRODUCTION .....
Page 5 and 6: 8. RESTORE FACTORY DEFAULTS .......
Page 7 and 8: 1. Product OverviewPackage Contents
Page 9: 2. Basic InstallationConnecting the
Page 13 and 14: Setting the IP Address Using MFP Se
Page 15 and 16: Wireless configurationPreliminary
Page 17 and 18: • When login successfully, from t
Page 19 and 20: Set Wireless Configuration Using MF
Page 21 and 22: • If the wireless network is secu
Page 23 and 24: 3. Using the MFP ServerIntroduction
Page 25 and 26: Please see below steps for USB prin
Page 28 and 29: D. Choose the desired printer. The
Page 30 and 31: E. Then the “Scanner Wizard” wi
Page 32 and 33: Manual-Connect / Auto-Connect FaxSo
Page 34 and 35: F. Try to issue a print job to the
Page 36 and 37: 4. The Control Center UtilityThis c
Page 38 and 39: General Configuration• Set Host I
Page 40 and 41: User Account ListUser Name & Passwo
Page 42 and 43: Quitting the Control Center Utility
Page 44 and 45: Storage NamesThe local drives of th
Page 46 and 47: 5. Select the codepage form File Se
Page 48 and 49: Setting up File Server Using the Co
Page 50 and 51: Setting up File Server Using Web Pa
Page 52 and 53: have to enter user name and passwor
Page 54 and 55: 6. MFP Server’s Web PagesIntroduc
Page 56 and 57: • Maintenance If you want to rest
Page 58 and 59: Procedure B: Using the Server’s W
Page 60 and 61:
5. Click Yes to confirmUsing Init B
Page 62 and 63:
9. The Init ButtonThe Init button i
show all

MFP Server User Manual - LevelOne

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?