Installation and Setup Guide - Lathem Time Corporation

PayClock Pro Installation and Setup Guide• At Extended Break Amount, enter the max extra amount of time the person can take andthe punch still count as a break rather than an in/out punch. Note: “Round UnscheduledRegistrations By” must be selected on the General tab of the Pay Class icon• Click Save to keep your changesIf you checked the Punched Break box in the Advanced tab at the Pay Class icon and you don’twant to require this person to punch for a break, check the Punched Break box, then set all theamounts under Punched Break to 00:00To change Auto Deduct settings• From the employee list at the top of the screen, choose the employee you want to edit• If you want PayClock to auto-deduct an amount of time for this employee, make sure theAuto Deduct box is checked• At Worked Hours to Qualify, enter the amount of time a person must work before thetime is deductedtime bar at the Timecard is shaded blueWhen PayClock auto deducts a break, a portion of the• At Length, enter the amount of time to deduct• If Auto Deduct is checked in the Advanced tab at the Pay Class icon and you don’t wantPayClock to deduct any time for this person, set the Work Hours to Qualify and Lengthto 00:00• Click Save to keep your changesWhen you did not set punched breaks and/or auto-deductions at the Pay ClassiconWhen you do not have settings defined at the Pay Class icon, you must set any punched breaks or autodeductionsfor each employee that has themTo set a Punched Break• From the employee list at the top of the screen, choose the employee you want to edit76