Installation and Setup Guide - Lathem Time Corporation

PayClock Pro Installation and Setup GuideSection 6.6 Schedules - Rounding Rules TabWhen setting up schedules, you can define rounding rulesAvailable Rules - To edit a rule, choose it from this listTo create a new rule, click the New button and enter the name of the rule at NameRounding Unit - Enter how punches round (for example, if you enter 15, the punches will round to 15-minute intervals)Break Point - Enter when a punch rounds up or down (for example, if you enter 7, before 7 minutes, thepunch rounds back; at 7 minutes, the punch rounds forward; after 7 minutes, the punch rounds forward)6.6.1 Setup Rounding RulesPayClock comes with four rounding rules already defined – 1/4 hour rounding, 1/10 hour rounding, 1/1hour rounding and 15/3 rounding. If your company rounds punches using another rule, you can create ithere• Click New to create a new rounding rule• Under Name type in the name you want to give this rule• Under Rounding Unit, enter how punches round• For example, if you enter 15, punches will round to 15-minute intervals• Under Break Point, enter when a punch rounds up or downFor example, if you enter 7, before 7 minutes, the punch rounds back; at 7 minutes, the punchrounds forward; after 7 minutes, the punch rounds forward69