Installation and Setup Guide - Lathem Time Corporation

PayClock Pro Installation and Setup GuideCHAPTER 17Auto Poll Manager OverviewThe Auto Polling Manager is a separate program that can automatically poll data from your terminals. Itdoes this by following the guidelines of any active polling schedule. Before you can use Auto Poll youmust set up at least one active polling scheduleSection 17.1 Open Auto Poll• In Windows 95 or higher, go to your PayClock Pro program group in the task bar and click theAuto Poll icon17.1.1 Options in Auto PollBeep on Error:Minimize:Restart Polling:Log File:Help:Shut Down:When this check box is selected the Auto Poll manager will beep to notify you if anerror occurs during pollingThis button minimizes the Auto Poll manager, but allows it to continue polling behindthe scenesThis toggle button turns polling on or off. If Auto Poll is currently polling the buttonlabel changes to Discontinue PollingThis button opens the log file. This file stores messages about any errors that occurwhile polling. This is a useful troubleshooting deviceThis button accesses this help file you are reading nowThis button exits Auto Poll. Remember, auto poll can’t retrieve data if it is not runningIf you have a PC400 or PC2000 terminal with a modem, you can use Auto Poll to activate TerminalManager’s auto answer mode and wait for your terminal to call231