Installation and Setup Guide - Lathem Time Corporation

PayClock Pro Installation and Setup GuideRS485 ConnectionBaud Rate 9600 or 4800 or 2400Data Bits 8Parity NoStop Bits 2Modem ConnectionNot AvailableSection 16.8 Set Polling SchedulesThe term Poll means to connect to a terminal and retrieve the punch data stored thereAs employees perform transactions at a terminal, the information is stored in the terminal’s memory. Theterminal must be polled in order to get the information to the PC. You can then access your time andattendance data using the Time and Attendance software. Terminal Manager makes polling your terminalseasier by using polling schedulesYou can create polling schedules that will run unattended on specific date and times, periodic intervals, orcontinuously.To create a polling schedule• From the File menu, choose View and select Polling Schedules• Choose the New button• From the General tab, enter a name for the polling schedule (Max 31 char) or use thedefault• Choose Save to save the polling schedule. If you want to activate the polling schedule,select the Active box on the General tabTo set polling schedule properties• Use the General tab of the Polling Schedules window to assign terminals to a pollingschedule, activate/deactivate polling schedules, and change polling schedule names• Use the Times tab of the Polling Schedules window to set the time when a pollingschedule occurs• Use the Days of Week tab of the Polling Schedules window to set the days the pollingschedule will be in effect219