SOUND ENGINEERING FROM - Loctite.ph

Manual Dispensing SystemsHow to Select aDispensing Process:BOND-A-MATIC ® 3000This pneumatically-operated system provides precisioncontrol for dispensing Loctite ® adhesives. Designed for usewith 200 gram tubes, one-pound, one-liter, and two-kilogrambottles. By controlling the amount of adhesive dispensedwith the unit's hand-held Vari-drop applicator valve, operatorsminimize waste and fatigue.Order number 982719 BOND-A-MATIC ® 3000 Dispenser, 0-15psiOrder number 982722 BOND-A-MATIC ® 3000 Dispenser,0-100psiOrder number 998130 Vari-Drop Applicator1.Select and approve adhesives to be used.2.Select equipment based on process requirements:•Manually Controlled: operator controls locationand amount of adhesive dispensed.•Semi-Automatic: operator controls locationand initiates the adhesive dispense cycle.The applicator controls the amount ofadhesive dispensed.•Automatic: the location and amount ofadhesive dispensed are controlled by theapplicator. The applicator is activated by apart presents switch or the operator.Loctite ® Dispensing and Cure SystemsSemi-Automatic Dispensing SystemsSyringe Dispensing SystemThis precision dispensing system is designed for use with10 ml and 30 ml syringe packaged products. Ideal for "smalldot" dispensing. Includes electronic control unit, syringeholder, syringes, footswitch and manual. Requires minimum30 psi to maximum 100 psi, 100-240 VAC @ 47-63 Hz.40 W.Order number 97006 Complete SystemFully Automatic Dispensing SystemsSystem shown includes 0.5 liter reservoir and hand-helddispense valve with footswitch.Semi-Automatic Dispensing SystemThis semi-automatic dispensing system is ideal for precisiondispensing application where the amount of productto be applied can be preset. Includes electronic controlunit, choice of reservoir and choice of dispense valve andmanual. Requires a minimum 60 psi to maximum 100 psi,100-240 VAC @ 47 -63 Hz. 40 W.Order number 97102 ControllerOrder number 97105 0.5 liter ReservoirOrder number 97112 Dispense ValveOrder number 97201 FootswitchOrder number 98009 Light Cure Dispense ValveAlso available:• 2 Liter reservoir with or without low level indicator.• 300 ml cartridge reservoir with or without low level indicator.System shown includes 0.5 liter reservoir and stationary valve.Fully Automatic Dispensing SystemThis fully automatic dispense system is designed for standaloneautomated applications or complete integration intoan automated assembly process. Includes two-channelelectronic controller, choice of dispense valves, choice ofreservoirs, plus options for solenoid valve, footswitch,advancing slides and rotospray dispenser. Requires minimum60 psi to maximum 100 psi, 100-240 VAC @ 47-63 Hz.110 W.Order number 97103 ControllerOrder number 97106 0.5 liter Reservoir, low level indicatorOrder number 97114 Dispense Valve32