12.07.2015 Views

engine, rotax 1503 4-tec - Sea-Doo.net

engine, rotax 1503 4-tec - Sea-Doo.net

engine, rotax 1503 4-tec - Sea-Doo.net

SHOW MORE
SHOW LESS
  • No tags were found...

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

Section 01 ENGINES (<strong>1503</strong> 4-TEC)Subsection 04 (LUBRICATION SYSTEM)Clean both contact surfaces of oil strainer cover.Check and clean the oil inlet and outlet area for dirtand other contaminations.61523R<strong>1503</strong>motr144A4R<strong>1503</strong>motr122A1TYPICAL1. Oil inlet to the oil pumpENGINE OIL PRESSUREREGULATORThe oil pressure regulator is located on the bottomof the PTO housing.InstallationFor installation, reverse the removal procedure.Position screws according to their length asshown.1R<strong>1503</strong>motr123ATYPICAL — NATURALLY ASPIRATED ENGINE1. Oil pressure regulatorR<strong>1503</strong>motr119A 12TYPICAL1. Screws M6 x 252. Screws M6 x 85Torque suction pump cover screws to 10 N•m(89 lbf•in) as per sequence illustrated below. ApplyLoctite 243 (P/N 293 800 060) on threads.SMR2005-035 49

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!