Veritas Storage Foundation™ and High Availability Solutions ...

50Storage Foundation and High Availability Solutions support for Solaris ZonesConfiguring Solaris non-global zones for disaster recovery■■Add the network adapters to the non-global zone’s configuration if thezone is configured as an exclusive IP zone. Assign an IP address to thenetwork adapter along with the Netmask and Gateway.After the zone boots, set up the other network-related information suchas the HostName, DNS Servers, DNS Domain, and DNS Search Path in theappropriate files (/etc/hostname, /etc/resolve.conf).2 On the primary site, shut down the zone.3 Use replication-specific commands to failover the replication to the secondarysite from primary site.4 Repeat step 1 on the secondary site.5 Perform step 6, step 7, step 8, and step 9 on the primary cluster and secondaryclusters.6 Create a VCS service group with a VCS Zone resource for the non-global zone.Configure the DROpts association attribute on the Zone resource with thefollowing keys and site-specific values for each: HostName, DNSServers,DNSSearchPath, and DNSDomain. If the non-global zone is an exclusive IPzone in this site, configure the following keys in the DROpts associationattribute on the Zone resource: Device (network adapter name), IPAddress,Netmask, and Gateway.7 Add the appropriate Mount resources and DiskGroup resources for the FileSystem and DiskGroup on which the non-global zone’s zoneroot resides. Adda resource dependency from the Zone resource to the Mount resource andanother dependency from the Mount resource to the Diskgroup resource.8 Add one of the following VCS replication resources to the service group formanaging the replication.■■A hardware replication agentExamples of these agents include SRDF for EMC SRDF, HTC for HitachiTrueCopy, MirrorView for EMC MirrorView, etc. Refer to the appropriateVCS replication agent guide for configuring the replication resource.The VVRPrimary agentFor VVR-based replication, add the RVGPrimary resource to the service group.Refer to the following manuals for more information:■For information about configuring VVR-related resources, see the VeritasStorage Foundation and High Availability Solutions ReplicationAdministrator's Guide.