Veritas Storage Foundation™ and High Availability Solutions ...

32Storage Foundation and High Availability Solutions support for Solaris ZonesConfiguring VCS in zonesTo configure a zone under VCS control using the hazonesetup utility whenthe zone root is on shared storageConsider an example in a two-node cluster (sysA and sysB). Zone local-zone isconfigured on both the nodes.To configure a zone under VCS control using the hazonesetup utility when the zoneroot is on local storage1 Boot the local zone on first node outside VCS.sysA# zoneadm -z local-zone boot2 Run hazonesetup with correct arguments on the first node. This adds failoverzone service group and zone resource in VCS configuration.sysA# hazonesetup -g zone_grp -r zone_res -z local-zone\-p password -a -s sysA,sysB3 Switch the zone service group to next node in the cluster.sysA# hagrp -switch zone_grp -sys sysB4 Run the hazonesetup utility with correct arguments on the node. Thehazonesetup utlity detects that the zone service group and zone resource arealready present in VCS configuration and update the configurationaccordingly.sysB# hazonesetup -g zone_grp -r zone_res -z local-zone\-p password -a -s sysA,sysB5 Repeat step 3 and step 4 for all the remaining nodes in the cluster.