Veritas Storage Foundation™ and High Availability Solutions ...

22Storage Foundation and High Availability Solutions support for Solaris ZonesAbout VCS support for zonesWhere /zones/zone-test is the zone root of the local zone.Bringing a Mount resource online in the zoneThe Mount resource is brought online in the global zone by default(RunInContainer = 0). If you want to bring a mount resource online inside thenon-global zone, perform the following:■■Export the block device to the zone through zone configuration. Ensure thatthe raw volume is used appropriately to prevent the possibility of datacorruption.Modify the ContainerInfo attribute for the service group and set values for theName, Type, and Enabled keys.# hagrp -modify service_group ContainerInfo Name zone_name\Type Zone Enabled 1■■Override the ContainerOpts attribute at the resource level.Set the value of the RunInContainer key to 1, for example:# hares -override Mountres ContainerOpts# hares -modify Mountres ContainerOpts\RunInContainer 1 PassCInfo 0For information on overriding resource type static attributes, refer to the VeritasCluster Server Administrator's Guide.Selecting the proper attribute values for a Mount resource forNFS mountsFor NFS mounts, you must mount in the non-global zone.■■Modify the ContainerInfo attribute for the service group and set values forName, Type and Enabled keys.Override the ContainerOpts attribute at the resource level.■ Set the value of the RunInContainer key to 1.Set the RIC value to 1. When you set RIC=1, specify the value of the MountPointattribute relative to the zone root, for example:BlockDevice = abc:/fs1MountPoint = /mnt1The file system is mounted on /zone root/mnt1.