Veritas Storage Foundation™ and High Availability Solutions ...

Veritas Cluster Server: Configuring Oracle VM Server for SPARC for high availabilityConfiguring Veritas Cluster Server to fail over a logical domain on a failure125To configure Veritas Cluster Server to monitor the application in the guest domain1 Configure a VCS service group (lsg1) for the application.The ManualOps attribute of the service group must remain set to true, thedefault value.2 Add a VCS user (lsg1 -admin) with the minimum privilege as the groupoperator of the VCS service group (lsg1).3 Configure a RemoteGroup service group (rsg1) in the control domain tomonitor the VCS service group (lsg1) that was configured in 1.4 Set the value of the following RemoteGroup resource attributes as follows:■RestartLimit attribute of the resource or type to 1 or higher■ OfflineWaitLimit attribute of the resource or type to 1■ ToleranceLimit attribute of the resource or type to 15 Create the dependencies between the groups and resources as shown inFigure 6-9.Figure 6-9Group and resource dependency diagramControl domainRemoteGroup service group (rsg1)RemoteGrouprsg1monitorsasg1Logical domain (ldom1)Application service group (asg1)ApplicationLDomonline global (firm)LDom service group (lsg1)StorageNetworkMountNICVolumeDiskGroup