SAM4s ER-290 Operators Manual.pdf

Programming PLU Status1. Turn the control lock to the PGM position.2. Enter the number of the PLU you wish to program (1-200), press the PLU key.3. Decide if you want a negative, enforced non-add entry, or disabled PLU. If you do notwant any of these options, enter 0. If you wish to select any of these options, completethe table below by adding the status digits for each option. Enter the resulting digit.PLU is Negative Yes = 1No = 0Enforce Non-AddEntryYes = 2No = 0PLU is Disabled Yes = 4No = 0+++4. Decide if you want a preset or single item PLU. If you do not want any of theseoptions, enter 0. If you wish to select any of these options, complete the table below byadding the status digits for each option. Enter the resulting digit.=PLU is Preset Yes = 1No = 0PLU is Single Item Yes = 2No = 0++=5. Complete the tax status table below by adding the status digits for each tax. Then enterthe resulting tax status code.Taxable by Rate 1? Yes = 1No = 0Taxable by Rate 2? Yes = 2No = 0Taxable by Rate 3? Yes = 4No = 0Taxable by Rate 4? Yes = 8No = 0++++6. Repeat steps 2 through 5 for each PLU you wish to program.7. Press the CASH/TEND key to end programming.=62 • Advanced Programming Instructions ER-290 Electronic Cash Register