SAM4s ER-290 Operators Manual.pdf

System Option ProgrammingNineteen system options are provided so that you can configure the ER-290 to your exactrequirements. Refer to the “System Option Table” on page 50 to review the system options. Readeach option carefully to determine if you wish to make any changes.NOTE: Because after clearing memory all options settings are automaticallyset to 0, and because your most likely option selections require a status settingof 0, you do not need to program this section unless you wish to change thedefault status.Programming a System Option:1. Turn the control lock to the PGM position.2. Enter the option number of the system option you wish to change. Press the RECDACCT key.3. Enter the number representing the status you have selected. Press the PAID OUT key.4. Repeat from step 3 for each system option you wish to change.5. Press the CASH/TEND key to end programming.System Option FlowchartRepeat for eachSystem OptionRECDACCTPAIDOUTCASH/TENDOption #Status48 • Advanced Programming Instructions ER-290 Electronic Cash Register