SAM4s ER-290 Operators Manual.pdf

Programming Department Entry Limit or PriceNote: Open departments are automatically assigned a 7 digit entry limit. Youdo not need to program this section for open departments, unless you wish toset a different limit.If you are programming a open department:• You can limit errors by setting the maximum amount that may be entered into adepartment.If you are programming a preset department:• You can set the preset price. The price you program here is the amount that isautomatically registered when the department key is pressed.Programming a Department Entry Limit or Price1. Turn the control lock to the PGM position.2. If the department is preset, enter the preset price, up to seven digits (01 to 1234567).(It is not necessary to enter proceeding zeros. For example enter $1.00 as 100.)OR,If the department is open, enter the entry limit you wish to set.3. Repeat from step 2 above for each department you wish to set.4. Press the CASH/TEND key to end programming.46 • Advanced Programming Instructions ER-290 Electronic Cash Register