5th International Powder Metallurgy Conference will take place at ...
5th International Powder Metallurgy Conference will take place at ...
5th International Powder Metallurgy Conference will take place at ...
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Türkiye<br />
Paper ID: 176 Hall C 14:50-15:10<br />
MUSTAFA GÜNAY, İBRAHİM ÇİFTÇİ and ULVİ<br />
ŞEKER<br />
Gazi University and Karabük University<br />
“EVALUATION OF CUTTING TOOL<br />
PERFORMANCE WHEN MACHINING SiC / P<br />
Al-Si COMPOSITES PRODUCED BY POWDER<br />
METALLURGY”<br />
09 October 2008<br />
Invited Lecture / HALL A / 13:30-14:15<br />
RANDALL M. GERMAN, San Diego St<strong>at</strong>e University<br />
“LIGHT METALS RESEARCH AND BARRIERS FOR AUTOMOTIVE APPLICATIONS”<br />
Session 04 Forming Processes<br />
Türkiye<br />
Paper ID: 14 Hall A 09:00-09:20<br />
MUSTAFA GÜDEN and SİNAN YÜKSEL<br />
İzmir Institute of Technology<br />
“EFFECT OF SiC PARTICLE ADDITION ON<br />
THE EXPANSION OF ALUMINUM POWDER<br />
COMPACTS IN THE FOAMING POWDER<br />
COMPACT PROCESS”<br />
Poland<br />
Paper ID: 34 Hall A 09:20-09:40<br />
JANUSZ KONSTANTY, DOROTA TYRAŁA,<br />
AGNIESZKA RADZISZEWSKA and WIKTORIA<br />
RATUSZEK<br />
AGH - University of Science and Technology<br />
“PROPERTIES OF IRON-BASE MATERIALS<br />
MANUFACTURED FROM PREMIXED POWDERS<br />
BY THE HOT PRESS PROCESS”<br />
Türkiye<br />
4<br />
Türkiye<br />
Paper ID: 261 Hall C 15:10-15:30<br />
FEVZİ, YILMAZ, FATİH ÜSTEL ve ÖZGÜR<br />
CEVHER<br />
Sakarya University<br />
“TERMAL PÜSKÜRTME KAPLAMA SEKTÖRÜ –<br />
GELİŞMELER, GÖRÜŞLER”<br />
Paper ID: 49 Hall C 15:30-15:50<br />
BEKİR SADIK ÜNLÜ, SELİM SARPER YILMAZ and REMZİ VAROL<br />
Celal Bayar University and Süleyman Demirel University<br />
“TRIBOLOGICAL PROPERTIES OF BORONIZED FERROUS BASED PM JOURNAL BEARINGS”<br />
Hungary<br />
Paper ID: 205 Hall A 09:40-10:00<br />
ANDREA MAKSZIMUS, C. HAKAN GÜR,<br />
TADEUSZ PIECZONKA, EVREN TAN and<br />
ZOLTAN GACSI<br />
Institute of M<strong>at</strong>erials Sciences, Univ. of<br />
Miskolc, Miskolc-Egyetemvaros, Metallurgical<br />
& M<strong>at</strong>erials Eng. Dept., Middle East Technical<br />
Univ., AGH Univ. of Science and Technology<br />
“COMPARISON OF THE MICROSTRUCTURE AND<br />
THE MECHANICAL PROPERTIES OF HOT- AND<br />
COLD-PRESSED Al-SiC COMPOSITES“<br />
P<br />
Australia<br />
Paper ID: 241 Hall A 10:00-10:20<br />
NIGEL STONE, DELPHINE CANTIN, MARK<br />
GIBSON, SRI LATHABAI, DAVID RITCHIE,<br />
ROBERT WILSON, MERCHANT YOUSUFF, RAJ.<br />
RAJAKUMAR and KEVIN ROGERS<br />
CSIRO Light Metals Flagship: M<strong>at</strong>erials Science<br />
& Engineering<br />
“A CONTINUOUS PROCESS FOR PRODUCTION<br />
OF C TITANIUM SHEET BY DIRECT POWDER<br />
P<br />
ROLLING”
Change language