5th International Powder Metallurgy Conference will take place at ...
5th International Powder Metallurgy Conference will take place at ...
5th International Powder Metallurgy Conference will take place at ...
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Romania<br />
Paper ID: 255<br />
DANA SALOMIE, CALIN PRICA, RADU MURESAN and<br />
MARIUS BODEA<br />
Technical University of Cluj- Napoca<br />
“STUDY ON SOLID STATE SOLUBILITY EXTENSION<br />
THROUGH MECHANICAL MILLING”<br />
Türkiye<br />
Paper ID: 35<br />
AYHAN ORHAN<br />
Fır<strong>at</strong> University<br />
“AISI 1020 YÜZEYİNE Ni/Ti TOZLARININ PTA VE GTA<br />
YÖNTEMLERİYLE KAPLANMASI”<br />
Türkiye<br />
Paper ID: 36<br />
AYHAN ORHAN<br />
Fır<strong>at</strong> University<br />
“Al MATRİSLİ B C TAKVİYELİ KOMPOZİTLERİN AŞINMA<br />
4<br />
DAVRANIŞINA B C BOYUTUNUN ETKİSİ”<br />
4<br />
Türkiye<br />
Paper ID: 60<br />
AYHAN ORHAN<br />
Fır<strong>at</strong> University<br />
“Al/SiC METAL KÖPÜK ÜRETİMİNDE SiC BOYUTUNUN<br />
MEKANİK ÖZELLİKLERE ETKİSİ”<br />
Türkiye<br />
Paper ID: 61<br />
AYHAN ORHAN<br />
Fır<strong>at</strong> University<br />
“THE EFFECT OF FeCrC PROPORTION ON THE FeCrC/Ti<br />
POWDERS COATED WITH GTA METHOD”<br />
Türkiye<br />
Paper ID: 62<br />
AYHAN ORHAN<br />
Fır<strong>at</strong> University<br />
“MICROSTRUCTURE CHARACTERIZATION OF Al MATRIX<br />
B C REINFORCEMENT COMPOSITES WELDED WITH<br />
4<br />
FRICTION WELDING METHOD”<br />
Türkiye<br />
Paper ID: 245<br />
LEVENT URTEKİN, YUSUF USTA, İBRAHİM USLAN and<br />
SÜLEYMAN SARITAŞ<br />
Dumlupinar University, Gazi University and TOBB<br />
University of Economics and Technology<br />
“INVESTIGATION THE EFFECTS OF POWDER ADDITION<br />
BY MEANS OF POWDER GEOMETRY AND DIFFERENT<br />
DIMENSIONS ON FLOW RATE AND APPARENT DENSITY<br />
OF METAL POWDER”<br />
Türkiye<br />
Paper ID: 78<br />
HÜLYA DURMUŞ, CEVDET MERİÇ<br />
Celal Bayar University and F<strong>at</strong>ih University<br />
“CO LASER WELDING OF 6061 AL ALLOY–SiC<br />
2<br />
COMPOSITE PRODUCED BY POWDER METALLURGY<br />
(PM) TECHNIQUE”<br />
16<br />
Poland<br />
Paper ID: 137<br />
MARCIN MADEJ, JAN LEŻAŃSKI<br />
AGH-University of Science and Technology<br />
“COPPER INFILTRATED HIGH SPEED STEEL BASED<br />
COMPOSITES”<br />
Romania<br />
Paper ID: 216<br />
NICULINA SECHEL, RADU L. ORBAN<br />
Technical University of Cluj-Napoca<br />
“THE INFLUENCE OF COPPER ADDITIONS AND<br />
ALLOYING MODE ON THE MECHANICAL PROPERTIES<br />
OF SINTERED Fe-2Mn-0.75C STEEL”<br />
Türkiye<br />
Paper ID: 218<br />
IOAN VIDA–SIMITI, GHEORGHE IEPURE, NICOLAIE<br />
JUMATE, NICULINA SECHEL<br />
Technical University of Cluj-Napoca and North<br />
University of Baia Mare<br />
“STUDY OF COMPOSITE MATERIALS FROM COPPER AND<br />
ALUMINA POWDER FOR ELECTRODES SPOT WELDING”<br />
Türkiye<br />
Paper ID: 120<br />
AHMET ATASOY<br />
Sakarya University<br />
“THE CURRENT STATUS OF THE TURKISH CHROMITE<br />
MINERAL INDUSTRY”<br />
Türkiye<br />
Paper ID: 127<br />
NİL ÜNAL, M. LÜTFİ ÖVEÇOĞLU<br />
Istanbul Technical University<br />
“THE INFLUENCE OF B 4 C ADDITION ON<br />
MICROSTRUCTURE AND PHYSICAL PROPERTIES OF W<br />
AND WC MATRIX COMPOSITES”<br />
Türkiye<br />
Paper ID: 194<br />
S. HAKAN YETGİN, FATİH ÇALIŞKAN ve FEHİM FINDIK<br />
Sakarya University<br />
“THE EFFECT OF DIFFERENT DESIGNED MIXERS ON THE<br />
WEAR BEHAVIORS IN MMC”<br />
Türkiye<br />
Paper ID: 23<br />
ERKAN KİBAR, RAMAZAN YILMAZ and DURSUN<br />
ÖZYÜREK<br />
Sakarya University and Karabük University<br />
“WEAR PROPERTIES OF 7075 ALUMINIUM ALLOYS<br />
PRODUCED BY POWDER METALURGY”<br />
Romania<br />
Paper ID: 76<br />
LUISA N. MÎTCĂ (OPREA), ADEM KURT, HANİFİ ÇİNİCİ,<br />
RADU L. ORBAN<br />
Technical University of Cluj-Napoca and Gazi<br />
University<br />
“THE INFLUENCE OF Al O CONTENT ON THE DENSITY<br />
2 3<br />
AND MECHANICAL PROPERTIES OF Cu-Al O ”<br />
2 3
Change language