5th International Powder Metallurgy Conference will take place at ...
5th International Powder Metallurgy Conference will take place at ...
5th International Powder Metallurgy Conference will take place at ...
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Session 18 Secondary Oper<strong>at</strong>ions<br />
(in Turkish)<br />
Türkiye<br />
Paper ID: 109 Hall C 09:00-09:20<br />
İLYAS SOMUNKIRAN, SERKAN ÖZEL, MEHMET<br />
KAYA, FURKAN SARSILMAZ<br />
Fır<strong>at</strong> University<br />
“Co-Cr-Mo TOZ ALAŞIMINDA PRESLEME<br />
BASINCININ ABRASİV AŞINMA DİRENCİNE VE<br />
MİKROYAPIYA ETKİSİ”<br />
Azerbaijan<br />
Paper ID: 110 Hall C 09:20-09:40<br />
SEYAMİ HÜSEYNOV, AĞALİ GULİYEV ve<br />
HEYBET ELDAROV<br />
Azerbaijan St<strong>at</strong>e Petroleum Academy<br />
“TOZ METALÜRJİSİ İLE YAPILMIŞ PARÇALARIN<br />
TALAŞLI İMALATI”<br />
Türkiye<br />
Paper ID: 230 Hall C 09:40-10:00<br />
SERKAN APAY, BEHÇET GÜLENÇ, AHMET<br />
DURGUTLU, NURULLAH KIRATLI<br />
Gazi University and Dumlupınar University<br />
“TOZALTI SERT DOLGU KAYNAĞINA BOR TOZU<br />
İLAVESİNİN AŞINMA ÖZELLİKLERİ ÜZERİNE<br />
ETKİSİ”<br />
Türkiye<br />
Paper ID: 144 Hall C 10:00-10:20<br />
SELDA AKGÜN, HÜLYA DURMUŞ, SALİM<br />
ŞAHİN<br />
Celal Bayar University<br />
“TOZ METALYÖNTEMİYLE ÜRETİLMİŞ Al-FeBx<br />
KOMPOZİTLERİN AŞINMA DAVRANIŞININ<br />
İNCELENMESİ”<br />
Session 19 Characteriz<strong>at</strong>ion of Metal<br />
<strong>Powder</strong>s and PM Parts<br />
(in Turkish)<br />
Türkiye<br />
Paper ID: 87 Hall A 10:40-11:00<br />
RIDVAN YAMANOĞLU, ŞADİ KARAGÖZ<br />
Kocaeli University<br />
“PREP ATOMİZE Ti Al V ALAŞIM TOZLARININ<br />
6 4<br />
MİKROYAPISAL KARAKTERİZASYONU”<br />
10<br />
Türkiye<br />
Paper ID: 100 Hall A 11:00-11:20<br />
Ş.HAKAN ATAPEK, RIDVAN YAMANOĞLU ve<br />
ŞADİ KARAGÖZ<br />
Kocaeli University<br />
“TOZ METALURJİK ÇELİKLERDE FRAKTOGRAFİK<br />
ETÜDLER”<br />
Türkiye<br />
Paper ID: 246 Hall A 11:20-11:40<br />
ÇETİN KARATAŞ, ŞÜKRÜ UPRAK<br />
Gazi University<br />
“TOZ ENJEKSİYON KALIPLAMADA SU BAZLI<br />
BAĞLAYICI KULLANARAK OLUŞTURULAN IN718<br />
SÜPERALAŞIM TOZLU BESLEME STOKLARINDAN<br />
PARÇA ÜRETİMİNİN İNCELENMESİ”<br />
Session 20 Modeling<br />
Türkiye<br />
Paper ID: 28 Hall B 10:40-11:00<br />
A.KADİR EKŞİ, MUSTAFA LAMAN, A. YILDIZ,<br />
SÜLEYMAN SARITAŞ, A. DEMİR and DURMUŞ<br />
ALİ BİRCAN<br />
Çukurova University and TOBB Univeristy of<br />
Economics and Technology<br />
“EXPERIMENTAL AND NUMERICAL STUDIES OF<br />
METAL POWDERS PRESSED BY COLD ISOSTATIC<br />
PRESSING UNIT CASE ALUMINIUM AND IRON”<br />
Ukraine<br />
Paper ID: 65 Hall B 11:00-11:20<br />
LYUDMILA RYABICHEVA, MICHAEL SHTERN,<br />
DMYTRO USATYUK and OKSANA GAPONOVA<br />
East-Ukrainian Volodymir Dal N<strong>at</strong>ional<br />
University, Frantsevich Institute For Problems<br />
of M<strong>at</strong>erials Science NAS of Ukraine<br />
“MATHEMATICAL MODELING OF AN<br />
INTERRELATIONSHIP OF PROPERTIES OF THE<br />
POROUS BODY AND MATERIAL OF HARD<br />
PHASE”<br />
Romania<br />
Paper ID: 248 Hall B 11:20-11:40<br />
BODEA MARIUS, MURESAN RADU, SALOMIE<br />
DANA and PRICA CALIN<br />
Technical University of Cluj-Napoca<br />
“MATHEMATICAL ANALYSIS OF THE POWDER<br />
PARTICLES SHAPES”
Change language