HMC263LP4E - Hittite Microwave Corp.

Gain vs. Temperature @ Vdd = +3V Gain vs. Temperature @ Vdd = +5VGAIN (dB)26221814Input Return Loss @ Vdd = +3VRETURN LOSS (dB)+25 C+85 C- 40 Cv01.07091018 22 26 30 34 380-5-10-15FREQUENCY (GHz)+25 C+85 C- 40 CGAIN (dB)HMC263LP4EGaAs MMIC LOW NOISEAMPLIFIER, 24 - 36 GHzInput Return Loss @ Vdd = +5VRETURN LOSS (dB)262218141018 22 26 30 34 380-5-10-15+25 C+85 C- 40 CFREQUENCY (GHz)+25 C+85 C- 40 C7Amplifiers - Low Noise - SMT-2018 22 26 30 34 38FREQUENCY (GHz)-2018 22 26 30 34 38FREQUENCY (GHz)Output Return Loss @ Vdd = +3V0Output Return Loss @ Vdd = +5V0RETURN LOSS (dB)-5-10-15+25 C+85 C- 40 CRETURN LOSS (dB)-5-10-15+25 C+85 C- 40 C-2018 22 26 30 34 38FREQUENCY (GHz)-2018 22 26 30 34 38FREQUENCY (GHz)For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.comApplication Support: Phone: 978-250-3343 or apps@hittite.com7 - 2

7Amplifiers - Low Noise - SMTNoise Figurevs. Temperature @ Vdd = +3VNF (dB)Isolation @ Vdd = +3VISOLATION (dB)8642+25 C+85 C- 40 Cv01.0709018 22 26 30 34 380-20-40-60FREQUENCY (GHz)+25 C+85 C- 40 CIsolation @ Vdd = +5VHMC263LP4EGaAs MMIC LOW NOISEAMPLIFIER, 24 - 36 GHzNoise Figurevs. Temperature @ Vdd = +5VNF (dB)ISOLATION (dB)8642018 22 26 30 34 380-20-40-60+25 C+85 C- 40 CFREQUENCY (GHz)+25 C+85 C- 40 C-8018 22 26 30 34 38FREQUENCY (GHz)-8018 22 26 30 34 38FREQUENCY (GHz)Output P1dB @ Vdd = +3V Output P1dB @ Vdd = +5V16161212P1dB (dBm)8P1dB (dBm)84+25 C+85 C- 40 C4+25 C+85 C- 40 C018 22 26 30 34 38FREQUENCY (GHz)018 22 26 30 34 38FREQUENCY (GHz)7 - 3For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.comApplication Support: Phone: 978-250-3343 or apps@hittite.com

Psat @ Vdd = +3V Psat @ Vdd = +5VPsat (dBm)v01.0709Output IP3 @ Vdd = +3V Output IP3 @ Vdd = +5VIP3 (dBm)1814106218 22 26 30 34 3825201510FREQUENCY (GHz)+25 C+85 C- 40 C+25 C+85 C- 40 CPsat (dBm)IP3 (dBm)1814106HMC263LP4EGaAs MMIC LOW NOISEAMPLIFIER, 24 - 36 GHz+25 C+85 C- 40 C218 22 26 30 34 3825201510FREQUENCY (GHz)+25 C+85 C- 40 C7Amplifiers - Low Noise - SMT518 22 26 30 34 38FREQUENCY (GHz)518 22 26 30 34 38FREQUENCY (GHz)For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.comApplication Support: Phone: 978-250-3343 or apps@hittite.com7 - 4

7Absolute Maximum Ratingsv01.0709HMC263LP4EGaAs MMIC LOW NOISEAMPLIFIER, 24 - 36 GHzAmplifiers - Low Noise - SMTDrain Bias Voltage (Vdd1, Vdd2)RF Input Power (RFIN)(Vdd = +3 Vdc)Outline Drawing+5.5 Vdc-5 dBmChannel Temperature 175 °CContinuous Pdiss (T = 85 °C)(derate 7.7 mW/°C above 85 °C)Thermal Resistance(channel to ground paddle)0.7 W130 °C/WStorage Temperature -65 to +150 °COperating Temperature -40 to +85 °CELECTROSTATIC SENSITIVE DEVICEOBSERVE HANDLING PRECAUTIONSNOTES:1. LEADFRAME MATERIAL: COPPER ALLOY2. DIMENSIONS ARE IN INCHES [MILLIMETERS]3. LEAD SPACING TOLERANCE IS NON-CUMULATIVE4. PAD BURR LENGTH SHALL BE 0.15mm MAXIMUM.PAD BURR HEIGHT SHALL BE 0.05mm MAXIMUM.5. PACKAGE WARP SHALL NOT EXCEED 0.05mm.6. ALL GROUND LEADS AND GROUND PADDLEMUST BE SOLDERED TO PCB RF GROUND.7. REFER TO HITTITE APPLICATION NOTE FOR SUGGESTED LAND PATTERN.Package InformationPart Number Package Body Material Lead Finish MSL Rating Package Marking [1][2] H263HMC263LP4E RoHS-compliant Low Stress Injection Molded Plastic 100% matte Sn MSL3XXXX[1] 4-Digit lot number XXXX[2] Max peak reflow temperature of 260 °C7 - 5For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.comApplication Support: Phone: 978-250-3343 or apps@hittite.com

Pin Descriptionv01.0709HMC263LP4EGaAs MMIC LOW NOISEAMPLIFIER, 24 - 36 GHz7Pin Number Function Description Interface Schematic1, 2, 4 - 7, 12 - 15,17 - 19, 24GND3 RFINPackage bottom has exposed metal paddlethat must be connected to RF/DC ground.This pin is AC coupledand matched to 50 Ohm.8 - 11, 21, 23 N/C Not connected.16 RFOUT22, 20 Vdd1, Vdd2Application CircuitThis pin is AC coupledand matched to 50 Ohm.Power supply for the 4-stage amplifier.See application circuit for required externalcomponents.Amplifiers - Low Noise - SMTFor price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.comApplication Support: Phone: 978-250-3343 or apps@hittite.com7 - 6

HMC263LP4E7Evaluation PCBv01.0709GaAs MMIC LOW NOISEAMPLIFIER, 24 - 36 GHzAmplifiers - Low Noise - SMTList of Materials for Evaluation PCB 123965 [1]ItemDescriptionJ1, J2 PCB Mount K ConnectorJ3 - J5DC PinC1, C2 100 pF Capacitor, 0402 Pkg.C3, C4 10 nF Capacitor, 0603 Pkg.C5, C6 4.7 µF Capacitor, TantalumU1PCB [2]HMC263LP4E123963 Evaluation PCB[1] Reference this number when ordering complete evaluation PCB[2] Circuit Board Material: Rogers 4350 or Arlon 25 FRThe circuit board used in the application should useRF circuit design techniques. Signal lines shouldhave 50 Ohm impedance while the package groundleads and package bottom should be connecteddirectly to the ground plane similar to that shown.A sufficient number of via holes should be usedto connect the top and bottom ground planes.The evaluation board should be mounted to anappropriate heat sink. The evaluation circuit boardshown is available from Hittite upon request.7 - 7For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.comApplication Support: Phone: 978-250-3343 or apps@hittite.com

HMC263LP4ENotes:v01.0709GaAs MMIC LOW NOISEAMPLIFIER, 24 - 36 GHz7Amplifiers - Low Noise - SMTFor price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.comApplication Support: Phone: 978-250-3343 or apps@hittite.com7 - 8