Aircraftspruce & Specialty Co. - NavirNet

More documents

Recommendations

Info

2006_161-168.qxd 6/27/06 4:45 PM Page 161 BEECHCRAFT ACCESSORIES – - CONTROL WHEELS BEECHCRAFT ACCESSORIES Designed & built by real-world pilots, manufactured to the highest standards. These products are built for those incomparable Beechcraft. Years of experience and the highest quality materials and construction result in the best products available for Bonanzas & Barons. All have FAA STC/PMA as applicable. BONANZA/BARON CONTROL YOKE LOCK Protect your investment with this heat treated lock. It installs quickly and simply (no modification is needed) but cannot be removed without being unlocked. It is a permanent, direct replacement for the original equipment. Complete with highest quality lock, instructions and all hardware. ..........P/N 05-00649..............$346.95 Optional clipboard for clearances or notes makes a stable flight center. Spring-loaded, it snaps out of the way in 2 seconds. Standard ....................................P/N 05-00650 ..........$144.95 Deluxe (with Quick Release)......P/N 05-01335 ..........$188.95 BEECH THROTTLE, MIXTURE, PROP KNOB SET These high-strength knobs for Bonanzas are a big improvement over old, cracked original equipment and likely the best replacement knobs on the market. Bright color-coded space-age material will not crack or fade and will not get hot like aluminum knobs. ....................................P/N 05-00652 ..........$178.95 Push buttons only, with new screws............P/N 05-00653 ............$76.75 WINDOW VENT HINGE & LATCH KIT For new windows only on Mooney, Piper, Socata, Commander ....................................................................P/N 05-01336 ..............$178.95 BEECH STORM WINDOW HINGE/LATCH KIT Every Bonanza or Baron pilot will appreciate the quality workmanship in every one of these storm window hinge/latch kits. Professional construction means they work smoothly, and they fit standard factory window holes with no modifications. Complete hinge/latch kit P/N 05-00654 ........$205.95 Latch & Stiker only..........P/N 05-00655 ........$102.95 Hinges Only ....................P/N 05-00656 ........$126.95 TRIKSLIDE DUAL THROTTLE MIXER Trikslide is a dual throttle input-mixer/slider designed especially for trikes and ultralight aircraft. Trikslide eliminates the interaction between two throttle cables. It will mount on any round or square structural member and provides smooth slide action with a full 2“ stroke. Features aluminum and delrin construction with universal mounting clamps and a universal control cable connector which will fit all cable terminations. P/N 05-00782 ........$49.95 HOMEBUILDERS CONTROL WHEELS New lightweight, low cost wheel designed with the homebuilder in mind. Approximately same dimensions as above ACS control wheel but weighs only 15 oz. made of cast magnesium. Coated with light gray epoxy paint which can be used as finished or repainted if preferred. Drill blank mounting post as required. P/N 246-9 ............$166.95ea CONTROL YOKE UPGRADES Now flaking & peeling finish on worn control yokes can be remedied cost effectively by these pilot-installable, semiflexible, molded grips which are available with push-to-talk button built-into the top of the yoke (not the side). The Model SX-100 grips (pilot & copilot set) and optional, builtin, Model SX-101 plug-in push-to-talk button simply slip- STYLE SX-100 over the thin, "ram's horn" control yokes of Cessna 150, 152, 172, 177, Grumman-American AA-1, AA-5 and early Mooney aircraft. Their thick, padded feel and built-in pushto-talk button add comfort, convenience & value to vintage airplanes. The top-mounted, low profile, miniature push-totalk button supplied completely wired with plug, jack and coiled cord, is less likely to be pressed by accident, get in the way or slip out of position than bulky, side-strapped, STYLE SX-101 units. Complete your updated yoke configuration with a pair of new model SX-110 center cushions, richly finished in black. Cushions fit neatly over centers of any control yokes. Model No. Description (set of 4) Part No. Price SX-100 Molded Grips w/o built-in PTT switch 05-16600 $42.95 SX-101 Molded Grips w/1 built-in PTT switch(LH) 05-16630 $69.95 SX-101 Molded Grips w/2 PTT switch (L&R) 05-16635 $99.50 SX-110 Center Cushions (set of 2) 05-16610 $42.95 161 DUAL CARBURETOR SPLITTER Splits a single throttle input into two outputs for dual carburetor installations. Clamp mounting. ............P/N 05-01823 ..........$29.95 DUAL CARBURETOR SPLITTER WITH OIL INJECTION Splits a single throttle input into three outputs for dual carburetor installations with oil injection. Clamp mounting.............................P/N 05-01824 ..........$31.95 HAND THROTTLE Medium torque rotation for single carburetors only. 270 degree rotation for fine throttle adjustment. Adjustable friction drag. Clamp mounting - no holes required Made from weatherproof materials. P/N 05-01825 $49.95 HAND THROTTLE High torque, 2.5.1 internal gear reduction.For dual carburetors. 825 degree rotation for fine throttle adjustment. Adjustable friction drag. Clamp mounting - no holes required. Made from weatherproof materials. P/N 05-01826 ..........$59.95 FOOTPEDAL CABLE CONNECTOR Convenient foot pedal throttle control. Aluminum/delrin construction with mounting hardware. Universal cable connector--fits all cable terminations. Designed especially for trikes and ultralight aircraft...................................P/N 05-01827........$12.95 CONTROL WHEEL #3 Designed to be more user friendly than standard control wheels. Mounting position can be raised or lowered one inch by rotating the mounting flange. All parts machined from 6061-T6 billet and anodized for corrosion resistance. Switch blocks can be added to uprights for push to talk or trim control. Wt: 26 oz. Mounting flange hole sizes: 3/4” or 7/8”. Special hole sizes: Add 10.00.... Special Order ACS Control Wheel ......P/N 05-00457 ..................$89.95 3/4” Black Anodized ............................P/N 05-02248 ..................$89.95 3/4” Bare Aluminum ............................P/N 05-02279 ..................$89.95 7/8” Black Anodized ............................P/N 05-02282 ..................$89.95 7/8” Bare Aluminum ............................P/N 05-02284 ..................$89.95 BEECH BONANZA/BARON CONTROL WHEELS These control wheels are identical in design to the new Beechcraft large ram’s horn style wheels. They are powder coated with a highly durable material in the same color as current Raytheon control wheels. Peeling or yellowing that occurs on older Beech wheels has been eliminated by the powder coating process. This control wheel is a direct replacement for the Beech/Raytheon 60-524080-13, 14 (for F33A, F33C, V35B, A36, and B36TC) and , -17 (for F33A, F33C, A36, B36TC, and 58) control wheels. Can be installed on many other aircraft using FAA form 337 for field approval. FAA Form 8130-3. Hand crafted black leather wrapping is available for these control wheels. Each wheel is individually hand laced and custom fitted to the wheel. We can also hand wrap your existing Beech control wheel in leather. Send your control wheel to Aircraft Spruce in Corona, CA and allow 3 weeks for delivery. An installation kit is required for each control wheel, which includes two thumb plates, a blank face plate, and mounting hardware. A Davtron MB800 digital chronometer installed in the faceplate of the control wheel is also available. An adaptor kit is available allowing installation of the control wheels on control columns of various sizes. The kit requires Form 337 approval or can be used on experimental aircraft. Description Part No. Price Basic Control Wheel 05-00545 $511.00 Basic Control Wheel install kit 05-00546 $74.50 Premium leather wrap only* 05-00547 $486.95 Leather wrapped control wheel install kit 05-00548 $78.25 Chronometer with custom faceplate 05-00549 $251.95 Adaptor Kit 05-00549 $251.95 * Note: Price is for leather wrapping only. Order control wheel separately. AIRCRAFT SPRUCE WEST AIRCRAFT SPRUCE EAST CORONA, CA • (877) 4-SPRUCE Prices Subject to Change Without Notice PEACHTREE CITY, GA • (877) 477-7823 CM WP ME HA AP LG EP CS IN EL AV TO PS BV BV
2006_161-168.qxd 6/27/06 4:45 PM Page 162 CM WP ME HA AP LG EP CS IN EL AV TO PS BV BV FUEL WARNING SYSTEM Float-action sensor in tank activates panel warning light when fuel supply is low. All-PBT unit, impervious to aviation fuel. Use AN 867-4 flange for mounting. Sensor ....................P/N 6905-400 $28.70 Warning Light..........P/N 05-17660 $21.10 Bulb ........................P/N GE-330......$0.95 DISCOUNTS: 10% ON 6, 15% ON 12, 20% ON 50 INVERTED PICKUP TUBES “Flop” tubes for inverted flight are made from Aeroquip 701-6 flexible hose. End fitting swaged onto hose has a 1/4" male pipe thread attached to tank outlet. Available for any of the tanks listed, or others. Specify tank model and tube length. Minimum length available is 9" 9"......P/N 05-20509 ....$50.50 10"........P/N 05-20510 ....$48.50 11" ....P/N 05-20511 ....$48.40 12"........P/N 05-20512 ....$48.50 13"....P/N 05-20513 ....$49.90 Add $1.80 to 13" price for each additional inch. PICKUP TUBE ADAPTER Specially machined AN912 fitting for connecting pickup tube to fuel tank. For 12" tubes & longer ....................................P/N 10380 ........$5.80 Specially machined AN912-12D for shorter than 12" ........................................................................P/N 10380-1 ..$23.40 FLOP TUBE ADAPTER WITH SIDE OUTLET This fitting eliminates the need to put an angle fitting on standard adapter. 1/4" female pipe thread on side and bottom & 1" male pipe or 3/4" male pipe on bottom. Use with AN867-6 or 8. 1" Male Pipe ....P/N 05-20525 ....$37.90 3/4" Male Pipe ..P/N 05-20526 ....$37.90 ALUMINUM WELDING FLANGES Female Pipe Dia. "D" Height "H" Price Part No. Thread Inches Inches Each AN867-1 1/8" 1-1/2 7/16 $5.95 AN867-2 1/4" 1-3/4 5/8 $6.70 AN867-3 3/8" 1-7/8 5/8 $6.85 AN867-4 1/2" 2 3/4 $7.30 AN867-6 3/4" 2-1/4 13/16 $11.20 AN867-8 1" 2-11/16" 1" $13.50 FINGER STRAINERS Finger strainers for fuel tank outlets. Brass fitting has 3/8" male pipe thread which fits AN867-3 welding flange, and 1/4" female pipe thread for valve or fuel line fitting. Screen is 16 mesh brass. P/N 05-17700........................$3.40 PITTS SPECIAL FUEL TANK OPTIONAL TANK INSTALLATIONS Sight Gauge (Fittings and Tubing) for Pitts or Skybolt Tanks - no installation charge. P/N 05-29000 ............$17.85 Flop Tube, Low Fuel Level Warning, Flush Filler Cap (specify type) - Add $5.00 installation charge and cost of unit to price of tank. Electric Sender - Add $15.00 installation charge and cost of unit to price of tank. FUEL TANK HOLD DOWN STRAPS Fabricated from.035 stainless steel. Straps are 1"wide x 36” long. For VariViggen Starduster & others. P/N 05-20400 ..........................$2.54 ANTI-CHAFE CHANNEL FOR FUEL TANK STRAPS Neoprene rubber extrusions to hold 1" wide metal fuel tank straps. #9 Channel P/N 05-01800 ...... $1.82 Ft. FUEL TANKS Capacity Main Tank for Each Design (Gallons) Tank Part No. Inverted Flight Part No. Wing Tank Part No. Acro-Sport II 24 $418.95 05-18510 Cougar 23 $502.00 05-18600 Cuby 12.5 $383.95 05-18700 EAA Bi-Plane 16 $310.95 05-18800 Fly Baby 14 $384.95 05-18900 Hatz Bi-Plane 18 $433.95 05-19020 Mustang I 16 $349.95 05-19100 Mustang II 27 $529.00 05-19200 Pitts Special 19 $310.95 05-19310 Pober Pixie 12 (Send Drwg.05-19400) $518.00 05-19420 Skybolt 29 $310.95 05-19510 $268.95 05-19520 Smith Miniplane 16 $446.95 05-19600 Starduster I 18 $383.95 05-19700 $487.95 05-19710 $335.95 05-19720 Starduster II 26 $683.00 05-19800 $584.00 05-19810 $446.95 05-19820 Tailwind $544.00 05-19950 SEE PRO-SEAL TANK SEALANT AND SLOSHING COMPONENTS IN COVERING SUPPLIES SECTION CAUTION: Electric sender should not be installed in a tank with flop tube to prevent possible entanglement. Tank should be free of everything but flop tube. Use sight gauge with flop tube. Prices are based on tanks manufactured to the original plans as issued by the designer. Minor modifications such as changes in tank fitting sizes or locations can be made at additional charge. Please submit all pertinent data with respect to desired changes at time of order. ALLOW 2-3 WEEKS DELIVERY TIME ON ALL TANKS. CUSTOM TANKS AVAILABLE: SEND BLUEPRINT OR SKETCH FOR QUOTATION ADD $15.00 BOX CHARGE FOR CRATING TANKS FOR SHIPMENT 162 Wink tank used to hold extra fuel or smoke oil in top wing of aerobatic biplanes. RAVEN FUEL TANKS RAVEN HEADER TANKS Header tank used for any aerobatic aircraft such as Pitts Specials etc. Comes with mounts to attach to existing tank straps, clamps and weld-in fitting for main tank. 16” x 7” in diameter. Holds approximately 2-1/2 gallons. Weighs 3 lbs. P/N 05-00913 $220.00 RAVEN WING TANKS S1-S Wing Tank ..............................P/N 05-00914 ..$220.00 S1-C Wing Tank ..............................P/N 05-00915 ..$220.00 Experimental S2, Eagle Wing Tank P/N 05-00916 ..$255.00 FUEL TANK DRAIN FITTING This specially designed fuel tank drain fitting minimizes drain flow vortexing that allows water and contaminants to remain in tank no matter how many times the drain cycle is repeated. Threads are 1/8" NPT - brass throughout P/N 05-28900 ....$27.50 ALUMINUM FUEL TANKS AIRCRAFT SPRUCE WEST AIRCRAFT SPRUCE EAST CORONA, CA • (877) 4-SPRUCE Prices Subject to Change Without Notice PEACHTREE CITY, GA • (877) 477-7823
Page 1 and 2: 2006_113-120.qxd 7/3/06 11:05 AM Pa
Page 3 and 4: 2006_121-128.qxd 6/23/06 12:53 PM P
Page 5 and 6: 2006_121-128.qxd 6/23/06 12:53 PM P
Page 7 and 8: 2006_121-128.qxd 6/23/06 12:53 PM P
Page 9 and 10: 2006_121-128.qxd 6/23/06 12:53 PM P
Page 11 and 12: 2006_129-136.qxd 6/27/06 4:21 PM Pa
Page 13 and 14: 2006_129-136.qxd 6/27/06 4:21 PM Pa
Page 15 and 16: 2006_129-136.qxd 6/27/06 4:21 PM Pa
Page 17 and 18: 2006_129-136.qxd 6/27/06 4:21 PM Pa
Page 19 and 20: 2006_137-144.qxd 6/27/06 4:09 PM Pa
Page 21 and 22: 2006_137-144.qxd 6/27/06 4:09 PM Pa
Page 23 and 24: 2006_137-144.qxd 6/27/06 4:09 PM Pa
Page 25 and 26: 2006_137-144.qxd 6/27/06 4:09 PM Pa
Page 27 and 28: 2006_145-152.qxd 7/3/06 11:25 AM Pa
Page 29 and 30: 2006_145-152.qxd 7/3/06 11:25 AM Pa
Page 31 and 32: 2006_145-152.qxd 7/3/06 11:25 AM Pa
Page 33 and 34: 2006_145-152.qxd 7/3/06 11:25 AM Pa
Page 35 and 36: 2006_153-160.qxd 6/27/06 4:28 PM Pa
Page 37 and 38: 2006_153-160.qxd 6/27/06 4:28 PM Pa
Page 39 and 40: 2006_153-160.qxd 6/27/06 4:28 PM Pa
Page 41: 2006_153-160.qxd 7/3/06 12:12 PM Pa
Page 45 and 46: 2006_161-168.qxd 6/27/06 4:45 PM Pa
Page 47 and 48: 2006_161-168.qxd 6/27/06 4:45 PM Pa
Page 49 and 50: 2006_161-168.qxd 7/3/06 12:25 PM Pa
Page 51 and 52: 2006_169-176.qxd 6/30/06 4:52 PM Pa
Page 53 and 54: 2006_169-176.qxd 6/30/06 4:52 PM Pa
Page 55 and 56: 2006_169-176.qxd 6/30/06 4:52 PM Pa
Page 57 and 58: 2006_169-176.qxd 6/30/06 4:52 PM Pa
Page 59 and 60: 2006_177-184.qxd 6/27/06 5:25 PM Pa
Page 61 and 62: 2006_177-184.qxd 7/3/06 1:13 PM Pag
Page 63 and 64: 2006_177-184.qxd 6/27/06 5:25 PM Pa
Page 65 and 66: 2006_177-184.qxd 6/27/06 5:25 PM Pa
Page 67 and 68: 2006_185-192.qxd 6/30/06 12:34 PM P
Page 69 and 70: 2006_185-192.qxd 6/30/06 12:34 PM P
Page 71 and 72: 2006_185-192.qxd 6/30/06 12:34 PM P
Page 73 and 74: 2006_185-192.qxd 6/30/06 12:35 PM P
Page 75 and 76: 2006_193-200.qxd 6/30/06 12:41 PM P
Page 77 and 78: 2006_193-200.qxd 6/30/06 12:41 PM P
Page 79 and 80: 2006_193-200.qxd 6/30/06 12:41 PM P
Page 81 and 82: 2006_193-200.qxd 6/30/06 12:41 PM P
Page 83 and 84: 2006_201-208.qxd 6/27/06 6:26 PM Pa
Page 85 and 86: 2006_201-208.qxd 6/27/06 6:26 PM Pa
Page 87 and 88: 2006_201-208.qxd 6/27/06 6:26 PM Pa
Page 89 and 90: 2006_201-208.qxd 6/27/06 6:26 PM Pa
Page 91 and 92: 2006_209-216.qxd 6/27/06 6:32 PM Pa
Page 93 and 94:
2006_209-216.qxd 6/27/06 6:32 PM Pa
Page 95 and 96:
2006_209-216.qxd 6/27/06 6:32 PM Pa
Page 97 and 98:
2006_209-216.qxd 6/27/06 6:32 PM Pa
Page 99 and 100:
2006_217-224.qxd 6/23/06 1:05 PM Pa
Page 101:
2006_217-224.qxd 6/23/06 1:05 PM Pa
show all

Aircraftspruce & Specialty Co. - NavirNet

Create successful ePaper yourself

Delete template?

Save as template?