PrimeLog+ - Primayer

PrimeLog ®Data logger systemPrimeLog is a comprehensive data loggersystem for use in a wide variety of waterindustry applications. The PrimeLog rangeconsists of single, two and four channel dataloggers. Communication is via local connectionto a PC or hand-held PDA. Remotecommunications alarm facilities are provided bytelephone loggers.ApplicationsOne range of data loggers can be used for manywater system applications, including:• District, domestic and leakage flow-metering• Hydraulic network analysis• Pressure/PRV monitoring• Rainfall• Open-channel flow (weirs, etc)• Reservoir and bore-hole depth• Over-flow detection• Functioning time of pumpsWatermeters &CombinationmeterDigital (flow) interfacingPrimeLog digital input is bi-directional and acceptsflow inputs from a wide range of meters, includingthose from Elster (Kent), Sensus (Socam/Meinecke),Schlumberger (Actaris/Stream) and ABB.InsertionmeterElectromagneticmeterOpenchannel flowPSTNThe digital input also operates with a rain gauge,overflow detector for monitoring reservoirs or stormoverflows, and also a sensor for monitoring the on/offtimes of pumps.Pressure/Analogue channelsReservoirBoreholeModemsPrimeLog ®Output forPrintersAccuracy is available to +/-0.1% (of full scale). Foroptimum accuracy the offset of the transducer iscorrected by the Auto Zero facility.switchingpower,Pressure0 -10v/4 -20mARainfallPump On/OffDetectionOverflowDetectionAQUA TECHNOLOGY SOLUTIONSalarms etc.Field display,programmingand read-back usingPDA/Notebook PCNetworksPrimeLog loggers with analogue inputs can acceptexternal pressure or depth transducers for monitoringweirs, reservoirs, boreholes, etc; or a wide range ofelectrical signals. One logger can monitor many typesof analogue signal.Logger system features• Interfaces to all common meters• Digital channels are bi-directional• Analogue channel accepts pressure, depth,voltage and current inputs• High analogue accuracy; ±0.1%• Small, robust, submersible to IP68• Powered for minimum 5 years(PSTN version battery life depends on use)Primayer

Selection guideStandard PrimeLog model (no modem)1F1P1A2i24i4iPrimeLog PSTN (with modem)1FM1PM2iM2M4iM4iMTotal number of channels1112244Number of bi-directional flow channels1--1122Number of analogue channels--1-1-2Number of internal pressure channels-1-1-2-Pressure/Analogue channel accuracy (%)-±0.5/±0.1±0.1±0.1±0.1±0.1±0.1Memory optionsAs standard a PrimeLog data logger is fitted with128k RAM (for approximately one year of readings at15 minute logging interval per channel). Optionally,1Mb RAM can be fitted to extend logging capacity,typically required for very fast logging.Logging and communicationsModesLogging intervalChannelsCyclic / start - stop / start - stopwhen full1 second to 24 hoursAll channels independentlyprogrammableReadback All data / defined data /data since last readDigital inputsAll PrimeLog loggers operate with the following:ManufacturerElster MetersSensusActarisABBPrimayerQuadrinaPulse Unit TypePSM, MSM, LRP, HRP, PG100,BPG20K505R, K510, RO1.1, RD01OPTO 06, OD 07Model S, Model TLOS, Cyble LF,Cyble HFAquaMaster, MagMaster, AquaProbePrimeProbe, Overflow detector,Pump on-time sensorMPT, MEP, QEPLocal RS 23219200 baudKhroneElectromagnetic metersPSTN modem2400 baud full duplex (V22 bis)Endress + HauserElectromagnetic metersAnalogue inputsPrimeLog loggers with analogue inputs (models 1A,2 and 4) have the following sensor choices:VariousCombination meters, RaingaugeDepth transducersPressure transducersCurrent inputsVoltage inputs0 - 0.15, 0.35, 1 Bar0 - 1, to 0 - 20 Bar0 - 10, 4 - 20 mA0 - 1, 0 - 10 VPressure inputsPrimeLog loggers incorporating an internal pressuretransducer (models 1P, 2i and 4i) can be supplied with10 or 20 Bar pressure ranges.AQUA TECHNOLOGY SOLUTIONSPrimayer LimitedPrimayer House, Parklands Business ParkDenmead, Hampshire PO7 6XP, United KingdomTel: +44 (0)2392 252228 Fax: +44 (0)2392 252235Email: sales@primayer.com Internet: www.primayer.comCertificate GB05/63731