CHEMISTRY JOURNAL OF MOLDOVA.General, Industrial and Ecological ChemistryInstructions for authorsTitle: The title should be brief, specific and rich in informative words; it should not contain any literature references orcompound numbers. The title is in size 14 pt Bold (all capital letters).Authors and affiliations: Where possible, supply given names, middle initials and family names for completeidentification. Indicate all the authors in order <strong>of</strong> their affiliation and provide affiliation address after the author’snames. Addresses should be as detailed as possible and must include the country name. The corresponding authorshould be indicated with an asterisk, and contact details (fax, e-mail) should be placed after nomination <strong>of</strong> the authors.There should be only one corresponding author. The names <strong>of</strong> the authors are in size 12 pt Normal and the name <strong>of</strong> theorganization and its address are in size 9 pt Italic.Abstract: Authors must include a short abstract <strong>of</strong> approximately four to six lines that states briefly the purpose <strong>of</strong> theresearch, the principal results and major conclusions. References and compound numbers should not be mentioned inthe abstract unless full details are given. The abstract body is 9 pt in size with the heading in bold.Keywords: Authors are expected to provide maximum 5 keywords using 10 pt font size with the heading in bold.Text: Text should be subdivided in the simplest possible way consistent with clarity. Headings should reflect therelative importance <strong>of</strong> the sections. Ensure that all tables, figures and schemes are cited in the text in numerical order.The graphics and artworks should be integrated in the paper. Trade names should have an initial capital letter, andtrademark protection should be acknowledged in the standard fashion, using the superscripted characters TM and ® fortrademarks and registered trademarks respectively (although not for words which have entered common usage, e.g.pyrex). All measurements and data should be given in SI units where possible. Abbreviations should be usedconsistently throughout the text, and all nonstandard abbreviations should be defined on first usage. Authors arerequested to draw attention to hazardous materials or procedures by adding the word CAUTION followed by a briefdescriptive phrase and literature references if appropriate. The experimental information should be as concise aspossible, while containing all the information necessary to guarantee reproducibility. The text body is 10 pt in size withthe heading in bold.Acknowledgments: This is an optional section. The authors have to decide acknowledgement <strong>of</strong> certain collaborators,funds or programs who contributed in a way to the research described in the paper.References: In the text, references should be indicated by Arabic numerals taken in square brackets, which runconsecutively through the paper and appear before any punctuation; ensure that all references are cited in the text andvice versa. The reference list should preferably contain only literature references; other information (e.g. experimentaldetails) should be placed within the body <strong>of</strong> the text. Preferably, each reference should contain only one literaturecitation. Authors are expected to check the original source reference for accuracy. Journal1 titles should be abbreviatedaccording to American Chemical Society guidelines (The ACS Style Guide; Dodd, J. S., Ed.: American ChemicalSociety: Washington, DC, 1997). Inclusive pagination is strongly recommended. Book references [2,3] should citeauthor(s), chapter title (if applicable), editor(s), book title, edition/volume, publisher name, publisher location, date andpages. Examples, including a thesis citation, 4 are shown below.[1] Barton, D. H. R.; Yadav-Bhatnagar, N.; Finet, J.-P.; Khamsi, J. Tetrahedron Lett. 1987, 28, 3111–3114.[2] Katritzky, A. R. Handbook <strong>of</strong> Organic Chemistry; Pergamon: Oxford, 1985; pp 53–86.[3] Smith, D. H.; Masinter, L. M.; Sridharan, N. S. In Heuristic DENDRAL: Analysis <strong>of</strong> Molecular Structure;[4] Wipke, W. T.; Heller, S. R.; Feldmann, R. J.; Hyde, E., Eds. Computer representation and manipulation <strong>of</strong>chemical information. John Wiley: New York, 1974; pp 287–298.[5] Cato, S. J. Ph.D. Thesis, University <strong>of</strong> Florida, 1987.Footnotes: Footnotes should appear at the bottom <strong>of</strong> the appropriate page and be indicated by the following symbols: *,†, ‡, §, , k.Tables: All tables should be cited in the text, and numbered in order <strong>of</strong> appearance with Arabic numerals. All tablecolumns should have a brief explanatory heading and where appropriate, units <strong>of</strong> measurement. Vertical lines shouldnot be used. Footnotes to tables should be typed below the table, each on a separate line, and should be referred to bysuperscript letters.Artwork: Only black and white artwork will be accepted. Figures, schemes and equations must be cited in the text andnumbered in order <strong>of</strong> appearance with Arabic numerals; other graphics should be placed at a particular position in thetext but not specifically referenced. All graphics (including chemical structures) must be supplied in digital formatintegrated into the paper. If graphics are created using ChemDraw the preferred settings is RSC-1997.cds set3
CHEMISTRY JOURNAL OF MOLDOVA.General, Industrial and Ecological ChemistryInstructions for authors(File/Apply settings/RSC-1997.cds): font 7 pt Arial, chain angle 120 o , bond spacing 20% <strong>of</strong> length, fixed length 0.43cm, bold width 0.056 cm, line width 0.016 cm, margin width 0.044 cm and hash spacing 0.062 cm. Compound numbersshould be in bold face. Computer-generated illustrations, halftones and line/tones should also be provided wherepossible. The following points should be taken into consideration when preparing electronic graphic files:Preferred graphics programs: ChemDraw, CorelDraw 6 and 7, PhotoshopRestricted use: ChemWindow, ISIS-DrawUnusable: *.doc files, Excel graphics, C-Design, Origin, ClarisDraw, ChemIntosh, MacDraw ProAcceptable formats <strong>of</strong> all graphics programs: TIFF, WMF, BMP, CDX, CDR.Files <strong>of</strong> scanned line graphics can be accepted at a minimum resolution <strong>of</strong> 1000 dpi, for scanned halftones, 300 dpi, andscanned line/tones.Copyright guidelinesUpon acceptance <strong>of</strong> an article, Authors will be asked to transfer copyright. This transfer will ensure the widest possibledissemination <strong>of</strong> information. A letter will be sent to the corresponding Author confirming receipt <strong>of</strong> the manuscript. Aform facilitating transfer <strong>of</strong> copyright will be provided. If excerpts from other copyrighted works are included, theAuthor(s) must obtain written permission from the copyright owners and credit the source(s) in the article. Authors willbe provided preprinted forms for use by Authors in these cases.Submission <strong>of</strong> manuscriptsPlease send your contribution as an e-mail attachment to:Journal Editor, Academician Gheorghe DUCAe-mail: chemjm@cc.acad.mdusing Micros<strong>of</strong>t Word (Office 97 or higher for PCs) word processing s<strong>of</strong>t.Please prepare a single file (allowed formats: *.doc or *.rtf) containing on a separate page a short accompanyingletter to the Editor, justifying why your article should appear in “Chemistry Journal <strong>of</strong> Moldova. General, Industrialand Ecological Chemistry”, followed by the article body with all schemes, figures, tables integrated in the text(though not crystallographic CIF files). On the last page <strong>of</strong> this file please provide the Graphical Abstract.Submission <strong>of</strong> figures and artwork in separate files is mandatory in their native formats.Authors should indicate the field <strong>of</strong> <strong>chemistry</strong> <strong>of</strong> their paper (see below) as well as the nature <strong>of</strong>contribution (Short Communication, Full Paper or Review Article) in their accompanying letters, alongwith their mailing address, daytime phone number and fax if available. Authors will be notified by email iftheir contribution is received and accepted.Editorial <strong>of</strong>fice:Institute <strong>of</strong> Chemistry, Academy <strong>of</strong> Sciences <strong>of</strong> Moldova, Str. Academiei, 3, MD-2028, Chisinau, Republic <strong>of</strong> Moldova.e-mail: chemjm@cc.acad.mdFax: +373 22 739954Tel: + 373 22 725490Pro<strong>of</strong>s: Pro<strong>of</strong>s will be dispatched via e-mail and should be returned to the publisher with corrections as quickly aspossible, normally within 48 hours <strong>of</strong> receipt.Fields <strong>of</strong> research:1. Analytical <strong>chemistry</strong>2. Ecological <strong>chemistry</strong>3. Food <strong>chemistry</strong>4. Industrial <strong>chemistry</strong>5. Inorganic and coordination <strong>chemistry</strong>6. Natural product <strong>chemistry</strong> and synthesis7. Organic <strong>chemistry</strong>8. Physical <strong>chemistry</strong> and chemical physics9. Supramolecular <strong>chemistry</strong>4
- Page 7:
Chemistry Journal of Moldova. Gener
- Page 10:
Chemistry Journal of Moldova. Gener
- Page 14 and 15:
Gh. Duca et al./Chem.J. Mold.. 2008
- Page 16 and 17:
Gh. Duca et al./Chem.J. Mold.. 2008
- Page 20 and 21:
Gh. Duca et al./Chem.J. Mold.. 2008
- Page 22 and 23:
Gh. Duca et al./Chem.J. Mold.. 2008
- Page 24 and 25:
Gh. Duca et al./Chem.J. Mold.. 2008
- Page 26 and 27:
Gh. Duca et al./Chem.J. Mold.. 2008
- Page 28 and 29:
Gh. Duca et al./Chem.J. Mold.. 2008
- Page 30 and 31:
Gh. Duca et al./Chem.J. Mold.. 2008
- Page 32 and 33:
Chemistry Journal of Moldova. Ion D
- Page 34 and 35:
Ion Dranca/Chem.J. Mold. 2008, 3 (1
- Page 36 and 37:
Ion Dranca/Chem.J. Mold. 2008, 3 (1
- Page 38 and 39:
Ion Dranca/Chem.J. Mold. 2008, 3 (1
- Page 40 and 41:
Ion Dranca/Chem.J. Mold. 2008, 3 (1
- Page 42 and 43:
Ion Dranca/Chem.J. Mold. 2008, 3 (1
- Page 44 and 45:
Ion Dranca/Chem.J. Mold. 2008, 3 (1
- Page 46 and 47:
M. Revenco et al./Chem.J. Mold. 200
- Page 48 and 49:
M. Revenco et al./Chem.J. Mold. 200
- Page 50 and 51:
Gh. Zgherea/Chem.J. Mold. 2008, 3 (
- Page 52 and 53:
Gh. Zgherea/Chem.J. Mold. 2008, 3 (
- Page 54 and 55:
Gh. Zgherea/Chem.J. Mold. 2008, 3 (
- Page 56 and 57:
Gh. Zgherea/Chem.J. Mold. 2008, 3 (
- Page 58 and 59:
G. Vasile et al./Chem.J. Mold. 2008
- Page 60 and 61:
G. Vasile et al./Chem.J. Mold. 2008
- Page 62 and 63:
G. Vasile et al./Chem.J. Mold. 2008
- Page 64 and 65:
V. Mukhin et al./Chem.J.Mold. 2008,
- Page 66 and 67:
V. Mukhin et al./Chem.J.Mold. 2008,
- Page 68 and 69:
Chemistry Journal of Moldova. N. Ku
- Page 70 and 71:
N. Kulikov et al./Chem.J.Mold. 2008
- Page 72 and 73:
V. Gladchi et al./Chem.J.Mold. 2008
- Page 74 and 75:
V. Gladchi et al./Chem.J.Mold. 2008
- Page 76 and 77:
V. Gladchi et al./Chem.J.Mold. 2008
- Page 78 and 79:
Chemistry Journal of Moldova. R. St
- Page 80 and 81:
R. Sturza et al./Chem.J.Mold. 2008,
- Page 82 and 83:
R. Sturza et al./Chem.J.Mold. 2008,
- Page 84 and 85:
R. Sturza et al./Chem.J.Mold. 2008,
- Page 86 and 87: Chemistry Journal of Moldova. V. Bo
- Page 88 and 89: V. Boldescu et al./Chem.J.Mold. 200
- Page 90 and 91: Chemistry Journal of Moldova. I. Lu
- Page 92 and 93: I. Lunga et al./Chem.J.Mold. 2008,
- Page 94 and 95: I. Lunga et al./Chem.J.Mold. 2008,
- Page 96 and 97: N.Gorinchoy et al./Chem.J.Mold. 200
- Page 98 and 99: N.Gorinchoy et al./Chem.J.Mold. 200
- Page 100 and 101: N.Gorinchoy et al./Chem.J.Mold. 200
- Page 102 and 103: N.Gorinchoy et al./Chem.J.Mold. 200
- Page 104 and 105: N.Gorinchoy et al./Chem.J.Mold. 200
- Page 106 and 107: Chemistry Journal of Moldova. N.Gor
- Page 108 and 109: N.Gorinchoy et al./Chem.J.Mold. 200
- Page 110 and 111: N.Gorinchoy et al./Chem.J.Mold. 200
- Page 112 and 113: N.Gorinchoy et al./Chem.J.Mold. 200
- Page 114 and 115: I. Ogurtsov, A. Tihonovschi / Chem.
- Page 116 and 117: I. Ogurtsov, A. Tihonovschi / Chem.
- Page 118 and 119: I. Ogurtsov, A. Tihonovschi / Chem.
- Page 120 and 121: M. Gonta et al./Chem.J.Mold. 2008,
- Page 122 and 123: M. Gonta et al./Chem.J.Mold. 2008,
- Page 124 and 125: M. Gonta et al./Chem.J.Mold. 2008,
- Page 126 and 127: M. Gonta et al./Chem.J.Mold. 2008,
- Page 128 and 129: Chemistry Journal of Moldova. N. Se
- Page 130 and 131: Chemistry Journal of Moldova. D. Ba
- Page 132 and 133: D. Batîr/Chem.J.Mold. 2008, 3 (1),
- Page 134 and 135: CHEMISTRY JOURNAL OF MOLDOVA.Genera
- Page 138: CHEMISTRY JOURNAL OF MOLDOVA.Genera