8003 Installation Manual - Chromalox Precision Heat and Control
8003 Installation Manual - Chromalox Precision Heat and Control
8003 Installation Manual - Chromalox Precision Heat and Control
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
P1 = Input Type <strong>and</strong> St<strong>and</strong>ard RangeRange0 = TC type L 0 / +800 °C1 = TC type J 0 / +800 °C2 = TC type K 0 / +999 °C3 = TC type N 0 / +999 °C4 = RTD type Pt 100 -199 / +500 °C5 = RTD type Pt 100 -19.9 / +99.9 °C8 = TC type L 0 / +999 °F9 = TC type J 0 / +999 °F10 = TC type K 0 / +999 °F11 = TC type N 0 / +999 °F12 = RTD type Pt 100 -199 / +999 °FP2 = Initial Scale ValueNot present when P1 = 5The initial <strong>and</strong> full scale values are used by the PIDalgorithm to calculate the input span.P3 = Full Scale ValueNot present when P1 = 5The initial <strong>and</strong> full scale values are used by the PIDalgorithm to calculate the input span.Note: the minimum input span (P3 - P2) is 300°C or600°F for TC input <strong>and</strong> 100°C or 200°F for RTD input.P4 = Output ConfigurationH = <strong>Heat</strong>ing HC = <strong>Heat</strong>ing / coolingP5 = <strong>Heat</strong>ing Output TyperEL = RelaySSr = SSRThe output type selected here must match hardwarejumper setup (see page 2).P6 = Cooling ElementAvailable only when P4 = HCAIr = AirOIL = OilH2O = WaterP7 = Alarm 1 TypeAvailable only when P4 = H0 = None1 = Process alarm (absolute)2 = B<strong>and</strong> alarm (+ <strong>and</strong> - deviation)3 = Deviation alarmP8 = Alarm 1 OperationAvailable only when P7 is different from 0H = High Alarm L = Low Alarm(outside if b<strong>and</strong> alarm) (inside if b<strong>and</strong> alarm)<strong>Chromalox</strong> <strong>8003</strong> User's <strong>Manual</strong> 5
Change language