16 - Custom Bikes by Mike

Jesse James FendersGenuine West Coast Choppers Steel Fendersby Jesse JamesConstruction starts with two pieces of heavy-gauge steel which are formedand welded into shape. Steel tubes are then welded to the underside tohelp keep your wiring looking clean and out of the way. Finally, the fenderis sanded and finished out, making it primer ready. Jesse’s fenders are recognizedand used by many of the top bike builders for their unmistakablestyle and superior quality.ApparelBike Kits& TrailersSeats& BagsRollerFortyFootControls’Curbfeeler’ Custom Rear Fenders by Jesse JamesHeavy-gauge steel fenders designed for custom applications. Each fenderis hand-formed and precision welded. Be sure to check installation and fitbefore painting.08685 81/2"-wide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$279.9908686 9"-wide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$279.99TombstoneHandControlsLighting‘Steeler’‘SmoothOutlaw’‘Two Eight’Custom Front Fenders by Jesse JamesSteel front fenders designed for custom applications. Be sure to checkinstallation and fit before painting.43/4"-Wide Fenders13794 ‘Forty’ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$205.4913795 ‘Roller’ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$218.0913796 ‘Tombstone’ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$217.49Note: When installed in conjunction with 21" front wheels, only Dunlop and Metzlerlow-profile tires are recommended due to clearance issues.6"-Wide Fenders11526 ‘Tombstone’ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$205.4911531 ‘Roller’ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$217.99ElectricalExhaustIntakeEngineGasketsTranny& ClutchUltra-Wide Custom Fenders by Jesse JamesMade of 18-gauge steel, these 101/2"-wide fenders fit our ‘Doss 230’ frames(CC #’s 95251 and 95252) when using Avon 230-series tires. Undrilled forcustom applications.16951 ‘Two Eight’ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$326.9913072 ‘Steeler’ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$308.1913073 ‘Smooth Outlaw’ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$326.9911523Steel Fenders by Jesse JamesThese smooth flowing, custom-styled steel fenders are made from 18-gauge steel and recognized and used by many of the top bike builders,including Donnie Smith, for their unmistakable style and superior quality.Note: All fenders should be checked for clearance before drilling mounting holes.‘Steeler’ Front FendersSuper-smooth radiused bends without steps and a low-profile are the markof the these fenders. Each heavy-duty fender is non-drilled to permit maximumcustom positioning.11523 43/4"-wide for custom applications . . . . . . . . . . . . . . . . . . . . . .$217.9911524 6"-wide for FL and FXST models . . . . . . . . . . . . . . . . . . . . . . . .$205.49DrivelineWheels,Tires& BrakesFramesForks& ShocksSheetmetalGeneralFor the Dealer Nearest You, Call: 800-729-333216.07CrossReference