16 - Custom Bikes by Mike

Stretched Gas Tanks862546865801526286260Sheetmetal16Custom One-Piece Stretched Tanksfor Softail ® ModelsNo longer is trick paint enough to define a hot custom. But add a customtank and the crowds will pause longer to look at a tricked out bike.Custom Chrome ® offers enough options to satisfy just about any desire.Our 2" stretch tanks are new stampings rather than using welded tipsto achieve stretch. They comewith or without dash recess, singleor dual gas caps, and withflush-mount locking gas caps(included), or for stock-stylescrew-in gas caps (not included).Single cap tanks have inlet offsetto the right side. Tanks with dashrecess use FL-style dashes anddash mounting plates. For theextreme custom Softail ® models,the 4" stretch tanks have weldedwings on the 2" stretch tanks forthe ultimate long, low look. Bikebuilders should note that theseDash-Mount Available15676tanks, while simply bolting on stock tank mounts on the frame, will requireminor finishing (especially with welded tip extensions), and probably a customseat to fit the rear contours of the extended tank. But the effort is wellworth it when the first admirer walks up and asks “how’d you do that?Fit models from 1984 thru 1999. 4.2 gallon capacity.Smooth-Top15262 2" stretch for single screw-in cap (cap not included) . . . . . . . .$474.9915261 2" stretch with dual flush locking caps . . . . . . . . . . . . . . . . . . . . .$385.4415286 2" stretch with single flush locking cap . . . . . . . . . . . . . . . . . . . . .$330.6915680 4" stretch for dual screw-in caps (caps not included) . . . . . . . .$420.4915676 4" stretch for single screw-in cap (cap not included) . . . . . . . .$397.2915681 4" stretch with dual flush locking caps . . . . . . . . . . . . . . . . . . . . .$472.9415687 4" stretch with single flush locking cap . . . . . . . . . . . . . . . . . . . . .$400.49Dash-Mount15688 4" stretch for dual screw-in caps (caps not included) . . . . . . . .$412.5915689 4" stretch with dual flush locking caps . . . . . . . . . . . . . . . . . . . . .$477.59One-Piece Tank Hardware Kit Softail ® Models610003 Works with all tanks listed above . . . . . . . . . . . . . . . . . . . . . . . . . . .$39.99Stretched Aluminum Gas Tanksfor Custom ApplicationsHand-crafted in 18-gauge aluminum for beauty, strength and light weight.Designed to use either Original Equipment or aftermarket screw-in gas capsor flush mount aircraft gas caps (must be purchased separately). Universalmounting for most custom applications. Made in England.‘Druiser’ 4.2 Gallon Capacity for Softail ® -StyleCustom Frames with 2" Stretch86251 ‘Druiser’ for screw-in cap . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$1,187.0086252 ‘Druiser’ for bolt-in aircraft cap . . . . . . . . . . . . . . . . . . . . . . . . . .$1,146.00‘Druiser’ 4.6 Gallon Capacity for Softail ® -StyleCustom Frames with 5" Stretch86253 ‘Druiser’ for screw-in cap . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$1,277.0086254 ‘Druiser’ for bolt-in aircraft cap . . . . . . . . . . . . . . . . . . . . . . . . . .$1,259.00‘Super Cruiser’ 6.0 Gallon Capacity for Softail ® -Style CustomFrames with 5" Stretch86257 ‘Super Cruiser’ for screw-in cap . . . . . . . . . . . . . . . . . . . . . . . . . .$1,277.0086258 ‘Super Cruiser’ for bolt-in aircraft cap . . . . . . . . . . . . . . . . . . . .$1,234.00‘Super Stretch’ 4.2 Gallon Capacity for Softail ® -Style CustomFrames with 2" Stretch86259 ‘Super Stretch’ for screw-in cap . . . . . . . . . . . . . . . . . . . . . . . . . .$1,187.0086260 ‘Super Stretch’ for bolt-in aircraft cap . . . . . . . . . . . . . . . . . . . .$1,146.00‘Super Stretch’ 4.2 Gallon Capacity for Softail ® -Style CustomFrames with 5" Stretch86261 ‘Super Stretch’ for screw-in cap . . . . . . . . . . . . . . . . . . . . . . . . . .$1,277.0086262 ‘Super Stretch’ for bolt-in aircraft cap . . . . . . . . . . . . . . . . . . . .$1,234.00‘Chopper’ 3.2 Gallon Capacity for Softail ® -Style Custom Frameswith 5" Stretch686580 ‘Chopper’ with pop-up gas cap (included) . . . . . . . . . . . . . . . .$1,636.00Aircraft Gas Caps for Aluminum Gas TanksAvailable in either 21/4" or 3"-diameters, these cap kits come completeand ready-to-install with bolt-in retaining rings, and hardware.60285 21/4" vented cap kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$148.0060286 3" vented cap kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$152.0060279 Replacement 21/4" vented cap ONLY . . . . . . . . . . . . . . . . . . . . . . .$106.5060281 Optional 21/4" vented cap with lock . . . . . . . . . . . . . . . . . . . . . . .$117.5060283 Replacement 3" vented cap ONLY . . . . . . . . . . . . . . . . . . . . . . . . .$112.00Note: Fuel tanks, particularly where custom paint is planned, must be pressure-tested, thensealed with tank prep (CC #3991012) and Kreem (CC #3991008) before painting, to protectthe final finish and prevent internal rust during winter storage.16.34Prices appearing in this catalog are Suggested Retail Price and are subject to change*