16 - Custom Bikes by Mike

Paul Yaffe Rear FendersApparelBike Kits& TrailersSeats& Bags‘Fatty 125’ Rear Fenderby Paul Yaffe OriginalsOne of the most popular fenders byPaul Yaffe yet! Now available 2"-widerfor a full 121/2". A perfect match for theMetzler 280 rear tire. Spun from 12-gaugesteel and shipped raw, ready for install, bodyand paint. The only “ONE PIECE” fender, no welds,no warpage, lazer cut... perfect every time! . . . . . . . . . . . . . . . . . . . . . . . .$475.99600061 121/2"-wide ‘Fatty 125’ rear fender‘U-Duit’ Rigid Rear Fenders by Paul Yaffe OriginalsUnique fenders are made of 12-gauge steel for unparalleled strength andrigidity. For use with 230, 240 and 250-series rear tires. Requires spacing.Fits custom applications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$499.9906547 Measures 101/2"-wide06548 Measures 81/2"-wideFootControlsHandControlsLightingElectricalExhaustIntakeEngine‘Fatty’ Rigid Rear Fenders by Paul Yaffe OriginalsUnique fenders are made of 12-gauge steel for unparalleled strengthand rigidity. Perfect for rigid applications or swingarm mounted Softail ®applications. Made for wide tire rigid frames. 101/2"-wide fender fits230, 240 and 250-series rear tires. 81/2"-wide fender fits 200-series tires.Fits custom applications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$499.9906545 Measures 101/2"-wide06546 Measures 81/2"-wide‘Fatty U-Duit’ by Paul Yaffe OriginalsTires keep getting fatter, so do the fenders to fit them. This 121/2"-widerear fender is blank for Metzler’s latest 280 rear tire. This 12-gauge steelunit is the perfect canvas for creating any fender style that you can dreamup, and is made of the strongest steel in the industry. The only “ONE PIECE”fender, no welds, no warpage, lazer cut... perfect every time! Shipped rawand ready for shape, install, body and paint... U Duit yourself! . . . . . .$446.99600062 121/2"-wide ‘Fatty U-Duit’GasketsTranny& ClutchDrivelineWheels,Tires& BrakesFramesThe ‘Shadow 17’ Rear Fenderby Paul Yaffe OriginalsFinally, a rear fender spun especially forlow profile 17" wheels.• Made of 12 gauge steel formaximum durability• Radially welded for extra stability• Perfect laser precision cut• Fits rigid frames only600005 Measures 81/2"-wide . . . . . . . . . .$499.99‘U-Duit Pro-Street’ Rear Fenders for Softail ® Modelsby Paul Yaffe OriginalsUnique fenders are made of 12-gauge steel for unparalleled strength andrigidity. 11"-wide fender fits 230, 240 and 250-series rear tires. 9"-widefender fits 200-series tires. Blank custom rear fender requires customfender struts. Fits custom applications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$499.9906551 Measures 11"-wide06552 Measures 9"-wideFor the Dealer Nearest You, Call: 800-729-333216.05Forks& ShocksSheetmetalGeneralCrossReference

Jesse James FendersGenuine West Coast Choppers Steel Fendersby Jesse JamesConstruction starts with two pieces of heavy-gauge steel which are formedand welded into shape. Steel tubes are then welded to the underside tohelp keep your wiring looking clean and out of the way. Finally, the fenderis sanded and finished out, making it primer ready. Jesse’s fenders are recognizedand used by many of the top bike builders for their unmistakablestyle and superior quality.ApparelBike Kits& TrailersSeats& BagsRollerFortyFootControls’Curbfeeler’ Custom Rear Fenders by Jesse JamesHeavy-gauge steel fenders designed for custom applications. Each fenderis hand-formed and precision welded. Be sure to check installation and fitbefore painting.08685 81/2"-wide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$279.9908686 9"-wide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$279.99TombstoneHandControlsLighting‘Steeler’‘SmoothOutlaw’‘Two Eight’Custom Front Fenders by Jesse JamesSteel front fenders designed for custom applications. Be sure to checkinstallation and fit before painting.43/4"-Wide Fenders13794 ‘Forty’ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$205.4913795 ‘Roller’ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$218.0913796 ‘Tombstone’ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$217.49Note: When installed in conjunction with 21" front wheels, only Dunlop and Metzlerlow-profile tires are recommended due to clearance issues.6"-Wide Fenders11526 ‘Tombstone’ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$205.4911531 ‘Roller’ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$217.99ElectricalExhaustIntakeEngineGasketsTranny& ClutchUltra-Wide Custom Fenders by Jesse JamesMade of 18-gauge steel, these 101/2"-wide fenders fit our ‘Doss 230’ frames(CC #’s 95251 and 95252) when using Avon 230-series tires. Undrilled forcustom applications.16951 ‘Two Eight’ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$326.9913072 ‘Steeler’ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$308.1913073 ‘Smooth Outlaw’ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$326.9911523Steel Fenders by Jesse JamesThese smooth flowing, custom-styled steel fenders are made from 18-gauge steel and recognized and used by many of the top bike builders,including Donnie Smith, for their unmistakable style and superior quality.Note: All fenders should be checked for clearance before drilling mounting holes.‘Steeler’ Front FendersSuper-smooth radiused bends without steps and a low-profile are the markof the these fenders. Each heavy-duty fender is non-drilled to permit maximumcustom positioning.11523 43/4"-wide for custom applications . . . . . . . . . . . . . . . . . . . . . .$217.9911524 6"-wide for FL and FXST models . . . . . . . . . . . . . . . . . . . . . . . .$205.49DrivelineWheels,Tires& BrakesFramesForks& ShocksSheetmetalGeneralFor the Dealer Nearest You, Call: 800-729-333216.07CrossReference

Jesse James Fenders‘Diablo’ Custom RearFender by Jesse JamesStyled to draw attention anywhereyou go. Made of 18-gauge steeland comes undrilled for all typesof custom applications. . . .$250.6908694 71/4"-wide‘Easy 6’ Front Fenderby Jesse JamesCustom 6"-wide undrilled fender. Made ofheavy-duty 18-gauge steel. Great for runningwide front tires. . . . . . . . . . . . . . . . . . . . . . . . .$205.4913071 Fits Wide Glide ® front ends’Jaialai’ Custom Front Fendersby Jesse JamesHeavy-gauge steel fender designed for customapplications. Each fender is hand-formed andprecision-welded. Be sure to check installationand fit before painting.08697 43/4"-wide . . . . . . . . . . . . . . . . . . . . . .$205.49‘Diablo’ Custom Front Fendersby Jesse JamesStyled to draw attention anywhere you go.Made of 18-gauge steel and come undrilledfor all types of custom applications.16952 43/4"-wide . . . . . . . . . . . . . . . . . . . . . .$217.9908693 6"-wide . . . . . . . . . . . . . . . . . . . . . . . .$205.49Note: CC #16952 is designed for low-profile 18" tires, standardprofile 19" tires, and low profile 21" tires with an outsidediameter of 28" or less.’Curbfeeler’ Custom Front Fenderby Jesse JamesHeavy-gauge steel fender designed for customapplications. Be sure to check installation and fitbefore painting. . . . . . . . . . . . . . . . . . . . . . . . .$217.9908683 6"-wideNote: CC #08683 is designed for low-profile 18" tires, standardprofile 19" tires, and low profile 21" tires with an outsidediameter of 28" or less.131621315913167Sheetmetal1613170‘Mama Jama’ Steel Fenders by Jesse JamesThe only thing more creative than the names for Jesse James’ fendersis the design itself. A set of these custom fit at just the rightangle and some sharp paint is about all that’s needed for a fullblowncustom bike. Holy Mama Jama!Rear Fenders13167 71/4"-wide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$287.6913169 9"-wide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$279.99Front Fenders13170 43/4"-wide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$217.9913171 6"-wide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$205.49Note: CC #13170 is designed for low-profile 18" tires, standard profile 19" tires, andlowprofile 21" tires with an outside diameter of 28" or less.13166Custom Steel Fenders by Jesse JamesThe durability of heavy-gauge.steel with a great custom look. ‘Classic’ fenders fit thefull radius of the tire for that ‘fat’ look, while the ‘Gunslinger’ is a bit more compact.Widths for most stock front and rear applications as well as extra-wide rear versions.For custom installations fenders are not pre-drilled. Be sure to check installationand fit before painting.Classic Gunslinger13159 13163 71/4"-wide rear . . . . . . . . . . . . . . . .$287.6913160 13164 81/2"-wide rear . . . . . . . . . . . . . . . .$279.99n/a 13533 81/2"-wide with license frame . .$400.69n/a 13154 9"-wide rear . . . . . . . . . . . . . . . . . .$279.99n/a 13527 9"-wide with license frame . . . .$400.6913161 13165 43/4"-wide front . . . . . . . . . . . . . . .$199.9913162 13166 6"-wide front . . . . . . . . . . . . . . . . .$199.9913164OptionalLicense PlateFrame16.08Prices appearing in this catalog are Suggested Retail Price and are subject to change*

Ness & Chica FendersNess ® Frontdragger FendersStyled to match ‘Taildragger’ rear fenders.Constructed of fiberglass with black gelcoat finish,and available in three widths.05531 61/4"-wide for 16" to 18" front wheelson FL Softail ® models from 1986to present . . . . . . . . . . . . . . . . . . . . . .$214.5405536 63/4"-wide for 16" to 18" front wheelson most Wide Glide ® front ends(except FL Softail ® models) . . . . . .$214.5405535 Fits 19" or 21" front wheelson Narrow Glide front ends . . . . .$159.95Note: Fender mounting bracket shown is not included and mustbe custom made.05008ApparelBike Kits& TrailersSeats& BagsFootControls05316Ness ® Taildragger Rear FendersThese fiberglass fenders are trimmed to fit Softail ®and FXR models for easy installation. Combinedwith custom fender struts, wheels and drivetraincomponents, the wide fenders facilitate mountingthe super-wide rear tires.05533 7"-wide for FXR and Softail ® modelswith stock fender struts . . . . . . . . . . . . .$214.5405530 8"-wide for Softail ® modelswith custom fender struts . . . . . . . . . .$214.5405534 81/2"-wide for Softail ® modelswith custom fender struts . . . . . . . . . .$214.5405315 9"-wide for custom frames . . . . . . . . .$214.5405316 Same as CC #05315 but with recesses forCateye taillight and license plate . . . .$214.54Note: 1997 and newer models require modificationand/or relocation of OEM fuse box05009Ness ® Sport Front FendersThe wide skirts of these custom fenders providemore room for your custom paint job. They’remade in the U.S.A. from A.B.S. plastic and comewith the mounting holes undrilled ready foryour custom paint job.05008 Fits Narrow Glide forksand 19" or 21" wheels . . . . . . . . . . .$49.9505009 Fits Wide Glide ® forksand 16" wheels . . . . . . . . . . . . . . . . . .$64.95HandControlsLightingElectricalExhaustIntake240950EngineGaskets240951Fender strut not included.Ness ® Legacy Front FenderStylized versions of the FLST rear fender. Thefront fender is a perfect match for the Legacyrear and gives a classic, sweeping look to thefront of your bike. It is easily fitted to mostWide Glide ® front ends using 16" or 18" frontwheels. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$189.9505529 Legacy front fender, 61/2"-wideTranny& ClutchDrivelineWheels,Tires& BrakesRaised Rib Rear Fendersby Chica Custom CyclesSteel rear fenders with a raised center rib. A unique style thatlooks good in many applications. Supplied unpainted andnon-drilled for maximum flexibility in mounting.240950 5" wide. Fits custom applications . . . . . . . . . .$161.99240951 6" wide. Fits custom applications . . . . . . . . . .$174.99240952 7.5" wide. Fits custom applications . . . . . . . . .$192.99Ness ® Cafe Front FenderThis sleek front Cafe fender is made out ofdurable A.B.S. plastic ready for primer andpaint. The mounting holes are undrilled topermit use on Narrow Glide front forks with19" or 21" wheels. . . . . . . . . . . . . . . . . . . . . . . .$49.9505007 Sold eachFramesForks& ShocksSheetmetalGeneralFor the Dealer Nearest You, Call: 800-729-333216.09CrossReference

Milwaukee Iron Fenders29986TrimlineRazors Edge299851380213803Sheetmetal1629989138002997729980Showboat29978So Cool2998229983Shark’s Tooth29981Long Thin Skirt29974Thin Skirt2998829984299791380129990Custom Front Fenders by Milwaukee IronThese designs shows off custom wheels and fork legs withoutdistraction. Ready for primer, paint or powder coat. 16-gaugesteel fenders are pre-drilled for easy installation.Trimline29975 Fits FL Softail ® models from 1986 to present . . . . . . . .$506.2913803 Fits FX Softail ® , Dyna Wide Glide ® and 4-speedFXWG models (except Springer and Deuce models) from 1980 to present . . . . . . . . . . . . . . . . . . . . .$303.7929976 Fits FLT, FLHT, FLHS and Road King ® modelsfrom 1984 to present . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$506.2913802 Fits Sportster ® , FX, FXR and Dyna Glide modelswith Narrow Glide forks from 1973 to present . . . . .$303.79Razors Edge29986 Fits FL Softail ® models from 1986 to present . . . . . . . .$506.2929985 Fits FX Softail ® , Dyna Wide Glide ® and 4-speedFXWG models (except Springer and Deuce models) from 1980 to present . . . . . . . . . . . . . . . . . . . . .$278.4929987 Fits FLT, FLHT, FLHS and Road King ® modelsfrom 1984 to present . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$506.2929984 Fits Sportster ® , FX, FXR and Dyna Glide modelswith Narrow Glide forks from 1973 to present . . . . .$278.49So Cool13800 Fits FLT, FLHT, FLHS and Road King ® modelsfrom 1984 to present (long) . . . . . . . . . . . . . . . . . . . . . . .$506.2929977 Fits FL Softail ® models from 1986 to present . . . . . . . .$506.2929978 Fits FX Softail ® , Dyna Wide Glide ® and 4-speedFXWG models (except Springer and Deuce models) from 1980 to present . . . . . . . . . . . . . . . . . . . . .$278.4929979 Fits Sportster ® , FX, FXR and Dyna Glide modelswith Narrow Glide forks from 1973 to present . . . . .$278.49Shark’s Tooth29981 Fits FL Softail ® models from 1986 to present . . . . . . . .$506.2929982 Fits FX Softail ® , Dyna Wide Glide ® and 4-speedFXWG models (except Springer and Deuce models) from 1980 to present . . . . . . . . . . . . . . . . . . . . .$506.2929983 Fits Sportster ® , FX, FXR and Dyna Glide modelswith Narrow Glide forks from 1973 to present . . . . .$506.2913801 Fits FLT, FLHT, FLHS and Road King ® modelsfrom 1984 to present . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$506.29Showboat29980 Fits FLSTS models from 1997 to present . . . . . . . . . .$759.44Thin Skirt29988 Fits FL Softail ® models from 1986 to present . . . . . . . .$506.2929990 Fits Springer Softail ® models (except FLSTS)from 1988 to present . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$506.2929989 Fits FLT, FLHT, FLHS and Road King ® modelsfrom 1984 to present . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$506.29Long Thin Skirt29973 Fits FL Softail ® models from 1986 to present (long) .$506.2929974 Fits FLT, FLHT, FLHS and Road King ® modelsfrom 1984 to present (long) . . . . . . . . . . . . . . . . . . . . . . .$506.2916.10Prices appearing in this catalog are Suggested Retail Price and are subject to change*

Milwaukee Iron FendersLong ‘Slim Jim’ ‘Sheriff’ ‘Flip Flop’ApparelBike Kits& TrailersSeats& BagsFootControlsShort ‘Sabertooth’Medium ‘Sabertooth’HandControlsLightingElectricalShort ‘Slim Jim’ on 4-Speed FrameLong ‘Slim Jim’ on 4-Speed Frame‘Sheriff’ on 4-Speed FrameStrutless Fenders for Softail ® Models by Milwaukee IronThese fenders have beefy, built-in supports to replace the traditional fender struts. Heavy-gauge, steel supportsare blended into the fenders for a great illusion. All fenders require the removal of the frame hornsto which the struts are normally attached.For Santee ® and Daytec Custom FramesAs many as six different styles for you to choosefrom for the most popular wide tire frames on themarket today. These fenders will fit the frames listedbelow provided they measure 11"-wide betweenthe fender strut mounts.For Standard Daytec Street Scene FramesAll of these fenders are 85/8"-wide.13282 Short ‘Slim Jim’ with 11/4" skirt . . . . .$546.7913279 Long ‘Slim Jim’ with 11/4" skirt . . . . .$617.6913287 ‘Sheriff’ . . . . . . . . . . . . . . . . . . . . . . . . . . .$597.4406413 Short ‘Sabertooth’ with 2" skirt . . . .$566.99For Daytec Street Scene 103/200 FramesAll of these fenders are 91/8"-wide.13284 Short ‘Slim Jim’ with 11/4" skirt . . . . .$556.9913290 Long ‘Slim Jim’ with 11/4" skirt . . . . .$627.7913289 ‘Sheriff’ . . . . . . . . . . . . . . . . . . . . . . . . . . .$607.5406414 Short ‘Sabertooth’ with 2" skirt . . . .$577.19For Santee ® FramesAll of these fenders are 85/8"-wide, and havea 2" skirt.06415 Short ‘Sabertooth’ . . . . . . . . . . . . . . . . .$617.9906419 Medium ‘Sabertooth’ . . . . . . . . . . . . . .$607.5406423 Long ‘Sabertooth’ . . . . . . . . . . . . . . . . .$647.59For Doss 230 Swingarm FramesFour styles are available to chose from for this popularcustom frame. These fenders are 101/2"-wide.06416 Short ‘Sabertooth’ with 2" skirt . . . .$728.9906420 Medium ‘Sabertooth’ with 2" skirt .$769.5906412 ‘Flip Flop’ with 5" skirt (31"-long) . .$779.69Long‘Sabertooth’For Santee and Original EquipmentSoftail ® FramesThese fenders fit 5-speed Original EquipmentSoftail ® frames from 1986 thru 1999, as well asSantee ® stock replacement frames that measure113/4"-wide between the strut mounts. 1997 andnewer models require modification and/orrelocation of the OEM fuse box.75/8"-Wide Fenders13280 Short ‘Slim Jim’ with 11/4" skirt . . . . .$537.6913277 Long ‘Slim Jim’ with 11/4" skirt . . . . .$607.5413285 ‘Sheriff’ . . . . . . . . . . . . . . . . . . . . . . . . . . .$587.3485/8"-Wide Fenders13281 Short ‘Slim Jim’ with 11/4" skirt . . . . .$546.7913278 Long ‘Slim Jim’ with 11/4" skirt . . . . .$617.6913286 ‘Sheriff’ . . . . . . . . . . . . . . . . . . . . . . . . . . .$597.44Strutless Fenders for 4-SpeedBig Twins by Milwaukee IronMilwaukee Iron has moved custom rear design out ofthe fabrication shop into the Custom Chrome ® catalogwith fenders that have beefy, built-in supportsreplacing traditional fender struts. Heavy-gauge,steel supports are blended into the fenders for agreat strutless illusion. They fit all 4-speed FL and FXswingarm frames (except Softail ® models) from 1965thru 1986.75/8"-Wide Fenders29821 Short ‘Slim Jim’ with 11/4" skirt . . . . .$526.5929827 Long ‘Slim Jim’ with 3" skirt . . . . . . .$627.7929824 ‘Sheriff’ . . . . . . . . . . . . . . . . . . . . . . . . . . .$587.3485/8"-Wide Fenders29822 Short ‘Slim Jim’ with 11/4" skirt . . . . .$538.6929825 ‘Sheriff’ . . . . . . . . . . . . . . . . . . . . . . . . . . .$597.44ExhaustIntakeEngineGasketsTranny& ClutchDrivelineWheels,Tires& BrakesFramesForks& ShocksSheetmetalGeneralFor the Dealer Nearest You, Call: 800-729-333216.11CrossReference

Milwaukee Iron, Heartland USA FendersMilwaukee Iron FendersMilwaukee Iron sheet metal fenders are formed with 14 gauge cold rollsteel tops and 16 gauge laser cut sides. Each is then hand fitted, TIG weldedand detail sanded so it's ready for primer and paint when it arrives.Designed for a true bolt-on fit that doesn't require modification oradjustment.2356623565Sheetmetal16Milwaukee Iron “Sabertooth” Rear Fendersfor Softail ® ModelsAggressive custom profile with a choice of 2 inch or 3 inch-wide skirts.Designed for stock or aftermarket Softail ® style frames from 1985 thru 1999with strut support "horns" removed.240903 75/8" I.D. wide x 23"-long with 2" skirts. Fits up to 150 tireon stock width frames with 113/4" frame top width . . . . . . . . .$556.99240904 85/8" I.D. wide x 23"-long with 2" skirts. Fits up to 200 tireon wide drive frames with 113/4" frame top width . . . . . . . . . .$566.99240905 91/8" I.D. wide x 23"-long with 2" skirts. Fits 200+ tireon stock width frames with 113/4" frame top width . . . . . . . . .$577.19240906 75/8" I.D. wide x 23"-long with 3" skirts. Fits up to 150 tireon stock width frames with 113/4" frame top width . . . . . . . . .$566.99240907 85/8" I.D. wide x 23"-long with 3" skirts. Fits up to 200 tireon wide drive frames with 113/4" frame top width . . . . . . . . . .$577.19240908 91/8" I.D. wide x 23"-long with 3" skirts. Fits 200+ tireon stock width frames with 113/4" frame top width . . . . . . . . .$587.34Custom Rear Fendersby Milwaukee IronUnique hand-crafted steel designs feature laser-cutpanels and careful TIG welding for a flawless seam. Fendersfor factory frames are 7"-wide to fit between stock fender struts.Medium ‘Slim Jim’ for Rigid FramesAll fenders are 3/16" thick, have a 2"-wide valance, are 42"-longwith left-side cutout for belt or chain.06408 75/8"-wide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$378.8906409 85/8"-wide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$399.9906410 91/8"-wide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$404.7406411 101/2"-wide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$536.69‘Flip Flop’ Universal Fit29810 73/4"-wide with tapered skirt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$268.3429811 83/4"-wide with tapered skirt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$278.4929812 91/4"-wide with tapered skirt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$288.5916.12‘Slim Jim’on Rigid Frame240907Universal‘Flip Flop’Heartland USA KitsGet the look of a longer, lower and wider bike with your OriginalEquipment frame. Wide fenders mounted lower on the bike combinedwith a frame hugging leather seat turns a stock bike into a custom withoutthe expense of a new frame. The 81/2"-wide fenders will accept rear tiresup to 180mm in width. Also available for custom frames to give them awhole new look. Fender, struts and seat sold separately.Heartland USA FendersSteel 81/2"-wide fenders will lower your seat for a more modern and stylishlook. Must use with Heartland USA fender struts and seats.23565 ‘Wild Heart’ fender (measures 201/2"-long, 81/2"-wide) . . . . . .$361.2923566 ‘Heartlander’ fender(measures 28"-long, 81/2"-wide) . . . . . . . .$361.29Heartland USA StrutsUse in conjunction with Heartland USA 81/2"-wide fenders. Sold in pairs.23563 Black powder coated 113/4" flat-to-flat struts forSoftail ® models from 1986 to present . . . . . . . . . . . . . . . . . . . . . . .$666.4923564 Chrome billet 113/4" flat-to-flat struts for allSoftail ® Deuce models from 2000 to present . . . . . . . . . . . . . . .$701.54240496 Fits 1986 to present FXST, FLST models, (except FXSTD) or aftermarketSoftail ® style frames with 113/4” frame top width. Strut support“horns” must be removed. Use with 81/2" wide fender. . . . . .$697.89Note: You must cut off frame horns in order to use fender struts properly.The Bolt-On Cure for Common Softail ® Modelsby Heartland USA This unique three-piece system islike no other bolt-on product forSoftail ® models on the markettoday. Consists of chrome billetcurved struts, a specially constructedsteel fender and contoured seat.By moving back the seating position,the design gives Softail ® modelsthe low to ground feel and thelook of a classic rigid but with thecomfortable ride and suspension ofa Softail ® model. All hardwareincluded.Note: Pieces must be purchased separately.Chrome Billet Curved Struts28362 Fits Original Equipment 5-speed Softail ® frames from 1986 thru1999. Use with CC #28374 fender and CC #’s 28364 or 28369seats (frame horns must be removed to use these struts) . . . .$666.4928373 Fit aftermarket 5-speed frames from 1986 to present usingCC #28374 fender and CC #’s 28378 or 28379 seats . . . . . . . . . .$666.498.5" Wide Rear FenderWill accept up to 180-series tire if desired. For a big tire installation onan Original Equipment frame, you may either use a one inch belt with anarrow pulley or use a wide tire conversion kit (CC #’s 95140 or 95139).28374 For use with Heartland struts (CC #’s 28362 or 28373) and seats(CC #’s 28379, 28369, 28364 or 28378) . . . . . . . . . . . . . . . . . . . . . .$361.29Custom SeatsSpecially designed seats for use with the Heartland struts and fender.Come in black leather or naugahyde.Black Leather Seats28364 Fits Original Equipment frames . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$361.2928378 Fits aftermarket frames . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$361.29Black Naugahyde Seats28369 Fits Original Equipment frames . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$299.9928379 Fits aftermarket frames . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$299.99Prices appearing in this catalog are Suggested Retail Price and are subject to change*

Custom Chrome ® & ZCB FendersApparelCustom Chrome ® Universal Fenders,Fender Brackets and StrutsUniversal fenders in three lengths with matching fender bracketsand fender struts. Now you can create your own custom rear fenderto match your rear wheel. To mount the fender, choose thematching wide bracket and the correct length of fender struts(sold separately).88342 Fender 83/4"-wide (220mm), long version . . . . . . . . . .$175.9588343 Fender 83/4"-wide (220mm), medium version . . . . . . .$145.9588344 Fender 83/4"-wide (220mm), short version . . . . . . . . . .$125.9588312 Fender 103/4"-wide (270mm), long version . . . . . . . . .$175.9588313 Fender 103/4"-wide (270mm), medium version . . . . .$145.9588314 Fender 103/4"-wide (270mm), short version . . . . . . . .$125.9588389 Fender 111/8"-wide (280mm), long version . . . . . . . . .$175.9588390 Fender 111/8"-wide (280mm), medium version . . . . .$145.9588391 Fender 111/8"-wide (280mm), short version . . . . . . . .$125.9588324 Fender struts, long . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$49.9588325 Fender struts, medium . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$39.9588326 Fender struts, short . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$32.9588327 Fender mounting bracket 83/4"-wide (220mm) . . . . . .$55.9588328 Fender mounting bracket 103/4" to 111/8"-wide(270 to 280mm) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$55.95LongMediumBike Kits& TrailersSeats& BagsFootControlsHandControlsLightingElectricalExhaustIntakeShortEngineFender StrutsFender BracketGasketsTranny& ClutchDrivelineWheels,Tires& BrakesFramesZCB Strutless Rear Fender for Dyna Glideand Sportster ® ModelsThese fenders are designed to be used with a 200-series tires on 51/2"-widerims. No modification of swingarm or offset kit is required. Requires theuse of wheels and belt pulleys for 2000 to present models. All Sportster ®fenders require wider swingarms.86677 Fits all Dyna Glide models from 1991 thru 1998 . . . . . . . . . . . .$1,958.0086995 Fits all Dyna Glide models from 1999 to present . . . . . . . . . . .$1,202.0086996 Fender up to 180 rear tires for all Sportster ® models from 1988thru 2003 (wide swingarm required CC #86111 or 86112) . .$1,202.0086997 Fender up to 210 rear tires for all Sportster ® models from 1988thru 2003 (wide swingarm required CC #86111 or 86112) . .$1,202.00Forks& ShocksSheetmetalGeneralFor the Dealer Nearest You, Call: 800-729-333216.13CrossReference

ZCB Fenders86312 866598665686992869868696468622886972 86979Sheetmetal16Fenders by ZCB‘Bolt-On’ fenders by ZCB. Handmade from steel and pre-drilled to fit allSoftail ® models (except Deuce models). All fender have integrated strutsand are available in six different styles. Please note our list below for yourunique design. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Call for PriceRear Fenders ‘III Flat’ with Integrated Struts86311 Side-mount fender (220mm wide) with TÜV for Evo- Softail ® frames86656 Side-mount fender (220mm wide) with TÜV for TC 88 Softail ® frames86654 Center-mount fender (220mm wide) for OEM- Softail ® frames in conjunctionwith aftermarket swingarms86655 Center-mount fender (260mm wide) for aftermarket Softail ® frames86657 Center-mount fender (260mm wide) for OEM Twin Cam 88 ® framesin conjunction with aftermarket swingarmsRear Fenders ‘III Round’ with Integrated Struts86960 Side-mount fender up to 210 rear tires with TÜV for Evo- Softail ® frames86961 Side-mount fender up to 210 rear tire with TÜV for TC 88 Softail ® frames86962 Side-mount fender up to 210 rear tire with TÜV for EFI TC 88 Softail ® frames86963 Side-mount fender up to 250 rear tires with TÜV for Evo- Softail ® frames86964 Side-mount fender up to 250 rear tire with TÜV for TC 88 Softail ® frames86965 Side-mount fender up to 250 rear tire with TÜV for EFI TC 88 Softail ® framesRear Fenders ‘V3 Flat’ with Integrated Struts86967 Side-mount fender up to 210 rear tires with TÜV for Evo- Softail ® frames86969 Side-mount fender up to 210 rear tire with TÜV for TC 88 Softail ® frames86970 Side-mount fender up to 210 rear tire with TÜV for EFI TC 88 Softail ® frames86971 Side-mount fender up to 250 rear tires with TÜV for Evo- Softail ® frames86972 Side-mount fender up to 250 rear tire with TÜV for TC 88 Softail ® frames86973 Side-mount fender up to 250 rear tire with TÜV for EFI TC 88 Softail ® framesRear Fenders ‘V3 Round’ with Integrated Struts86974 Side-mount fender up to 210 rear tires with TÜV for Evo- Softail ® frames86976 Side-mount fender up to 210 rear tire with TÜV for TC 88 Softail ® frames86977 Side-mount fender up to 210 rear tire with TÜV for EFI TC 88 Softail ® frames86978 Side-mount fender up to 250 rear tires with TÜV for Evo- Softail ® frames86979 Side-mount fender up to 250 rear tire with TÜV for TC 88 Softail ® frames86980 Side-mount fender up to 250 rear tire with TÜV for EFI TC 88 Softail ® framesRear Fenders ‘VI2 Flat’ with Integrated Struts86981 Side-mount fender up to 210 rear tires with TÜV for Evo- Softail ® frames86983 Side-mount fender up to 210 rear tire with TÜV for TC 88 Softail ® frames86984 Side-mount fender up to 210 rear tire with TÜV for EFI TC 88 Softail ® frames86985 Side-mount fender up to 250 rear tires with TÜV for Evo- Softail ® frames86986 Side-mount fender up to 250 rear tire with TÜV for TC 88 Softail ® frames86987 Side-mount fender up to 250 rear tire with TÜV for EFI TC 88 Softail ® framesRear Fenders ‘VI2 Round’ with Integrated Struts86988 Side-mount fender up to 210 rear tires with TÜV for Evo- Softail ® frames86990 Side-mount fender up to 210 rear tire with TÜV for TC 88 Softail ® frames86991 Side-mount fender up to 210 rear tire with TÜV for EFI TC 88 Softail ® frames86992 Side-mount fender up to 250 rear tires with TÜV for Evo- Softail ® frames86993 Side-mount fender up to 250 rear tire with TÜV for TC 88 Softail ® frames86994 Side-mount fender up to 250 rear tire with TÜV for EFI TC 88 Softail ® framesRear Fenders ‘VI Flat’ with Integrated Struts (not shown)686222 Side-mount fender up to 210 rear tires with TÜV for Evo- Softail ® frames686223 Side-mount fender up to 210 rear tire with TÜV for TC 88 Softail ® frames686224 Side-mount fender up to 210 rear tire with TÜV for EFI TC 88 Softail ® frames686225 Side-mount fender up to 250 rear tires with TÜV for Evo- Softail ® frames686226 Side-mount fender up to 250 rear tire with TÜV for TC 88 Softail ® frames686227 Side-mount fender up to 250 rear tire with TÜV for EFI TC 88 Softail ® framesRear Fenders ‘VI Round’ with Integrated Struts686228 Side-mount fender up to 210 rear tires with TÜV for Evo- Softail ® frames686229 Side-mount fender up to 210 rear tire with TÜV for TC 88 Softail ® frames686230 Side-mount fender up to 210 rear tire with TÜV for EFI TC 88 Softail ® frames686231 Side-mount fender up to 250 rear tires with TÜV for Evo- Softail ® frames686232 Side-mount fender up to 250 rear tire with TÜV for TC 88 Softail ® frames686233 Side-mount fender up to 250 rear tire with TÜV for EFI TC 88 Softail ® framesNote: All fenders for Twin Cam 88 ® models come recessed for the OEM electronic box.Slotted Front Fenders86312 Fits FX triple trees with 16" wheels86658 Fits FL triple trees with 16" wheels86679 Fits Dyna Glide models with 19" front wheels‘New-Style’ Front Fenders for Low Profile Tires86678 Fits Dyna Glide models with 19" front wheels86659 Fits FX forks with 130/70-16, 130/60-17, 120/60-17, 120/70-17 wheels86660 Fits FL forks with 130/70-16, 130/60-17,120/60-17, 120/70-17 wheels86661 Fits FX forks with 130/70-17, 130/80-16, 130/60-18, 120/16-18 wheels86662 Fits FL forks with 130/70-17, 130/80-16, 130/60-18, 120/60-18 wheels86663 Fits FX forks with 130/70-18, 120/70-18, 130/90-16, MT 90-16, 130/80-17 wheels86664 Fits FL forks with 130/70-18, 120/70-18, 130/90-16, MT 90-16,130/80-17 wheels86831 Fits FL forks with 130/80-18 wheels86830 Fits FX forks with 130/80-18 wheels86998 Adapter kit to install FL front fenders on Deuce front forks16.14Prices appearing in this catalog are Suggested Retail Price and are subject to change*

Fenders by SumaxStronger than steel and lighter than fiberglass, Sumax’s unique composite fabrication makes theirfenders light in weight yet ten times stronger than conventional fiberglass. Exclusive ‘radial wrap’woven fabric, formed over ceramic molds, minimizes shrinkage, ensures correct dimensions and providessuperior strength. Undrilled to permit precise fitting, and already primered and ready to paint.Sumax Fenders45509ApparelBike Kits& TrailersSeats& Bags4555345503FootControls‘Loboy’ FendersThe 71/4"-wide rear fenders are generally used as stockwidth replacements for most models. Some versionshave a recessed area measuring 73/8" x 41/2" to accepta license plate with frame.‘Loboy’ Front Fenders45500 Fits 39mm Narrow Glide forks . . . . .$122.4945502 Fits Wide Glide ® forkswith 16" front wheels . . . . . . . . . . . . .$132.694557945500‘Skirted Loboy’ Front Fenders45503 Fits 61/2" Wide Glide ® forks with 16" front wheels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$132.6945553 FL-style Loboy for 61/2" Narrow Glide ® forks (with spacers) with 16" wheels . . . . . . . . . . . . . .$173.49Rear Fenders45506 Fits Sportster ® model struts with 67/8" mounting width . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$173.4945579 71/4"-wide with license plate recess . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$187.7945577‘Loboy Bobbed’ Rear Fendersby SumaxStylish Fat Bob fenders have no recessed areasfor reflector inserts, making them easy toposition and close the gap over the rear tire.They are undrilled to permit precise fitting,and already primered and ready to paint. The71/4"-wide rear fenders are generally used asstock width replacements for most models.Wider fenders are for custom applications.Some versions have an integral license platemount.Without License Plate Mount45510 Fits Sportster ® models with67/8" mounting width . . . . . . . . . . .$142.8945509 71/4"-wide . . . . . . . . . . . . . . . . . . . . . .$142.8945511 81/4"-wide . . . . . . . . . . . . . . . . . . . . . .$146.9945512 9"-wide . . . . . . . . . . . . . . . . . . . . . . . .$153.09With License Plate Mount45577 9"-wide . . . . . . . . . . . . . . . . . . . . . . . .$177.59HandControlsLightingElectricalExhaustIntakeEngineGaskets45556Tranny& Clutch455724558145542Driveline‘Loboy Sweeper’ FendersThree inches shorter than the ‘Street Sweeper’ fenders, the 71/4"-widefenders are generally used as stock width replacements.Front Fender for Wide Glide ® Forks45575 Fits 61/2" Wide Glide ® forks with 16" wheels . . . . . . . . . . . . . . . .$175.59Rear Fenders45572 71/4"-wide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$214.2945581 71/4"-wide with license plate recess . . . . . . . . . . . . . . . . . . . . . . . .$224.4945575‘Dagger’ Fenders by SumaxRounded styling wraps around tire for a sensationallook. Designed with long, wide tabs tosimplify mounting.Front Fenders45554 Fits 7" Wide Glide ® forkswith 21" wheels . . . . . . . . . . . . . . .$132.6945555 Fits 61/2" Wide Glide ® forkswith 16" wheels . . . . . . . . . . . . . . .$142.8945556 Fits 41/2" Narrow Glide forkswith 21" wheels . . . . . . . . . . . . . . .$132.69Rear Fenders45542 71/4"-wide for stock frames . . . .$173.49Wheels,Tires& BrakesFramesForks& ShocksSheetmetalGeneralFor the Dealer Nearest You, Call: 800-729-333216.15CrossReference

Sumax & Doss Rocket FendersPro CompPro Comp‘Smoothee’Sumax ‘Pro Comp’ Rear FendersUndrilled to permit precise fitting, and alreadyprimered and ready to paint. The 71/4"-widefender is generally used as a stock widthreplacement for most models. Wider fendersare for custom applications.Pro Comp Fender45516 Fits Sportster ® models with67/8" mounting width . . . . . . . . .$153.09Pro Comp ‘Smoothee’ Fenders45531 Fits Sportster ® models with67/8" mounting width . . . . . . . . .$153.0945551 Fits Dyna Glide models with7" mounting width . . . . . . . . . . . .$153.0945530 71/4"-wide . . . . . . . . . . . . . . . . . . . .$153.0945532 81/4"-wide . . . . . . . . . . . . . . . . . . . .$157.1945533 9"-wide . . . . . . . . . . . . . . . . . . . . . . .$163.29‘Dominator’ Rear Fendersby SumaxUndrilled to permit precise fitting, and alreadyprimered and ready to paint. The 71/4"-widerear fender is generally used as stock widthreplacements for most models.45522 Fits Sportster ® models with67/8" mounting width . . . . . . . . . . .$142.8945520 71/4"-wide . . . . . . . . . . . . . . . . . . . . . .$142.894554045546‘Pro Sport’ Front Fendersby SumaxSumax’s unique composite fabrication makestheir fenders lightweight yet ten times strongerthan conventional fiberglass. Undrilled, andready for primer and paint.45513 Fits 7" Wide Glide ® forks with 18",19" or 21" wheels . . . . . . . . . . . . . .$112.2945546 Fits 61/2" Wide Glide ® forks with 16"front wheels . . . . . . . . . . . . . . . . . . . .$134.69Sumax‘Street Sweeper’Front FenderUndrilled to permit precisefitting, and already primeredand ready to paint.45534 Fits 61/2" Wide Glide ® front forkswith 16" wheels . . . . . . . . . . . . . . .$228.59‘Digger’ Front Fenders by SumaxLean and mean, yet with a long sweep over thefront tire for a unique look.45540 Fits 41/2" Narrow Glide forkswith 18", 19" or 21" wheels . . .$122.4945541 Fits 61/2" Wide Glide ® forks with16" wheel (not shown) . . . . . . . .$132.69Sheetmetal‘Desperado’ Rear FenderYou may have noticed it’s simplicity yet distinctivedesign featured on the ‘Pegasus’ HR 3 kit.This rear fender is truly one of a kind.• Measures 9"-wide with 400mm-radius• Especially made for 16" and 18" wheels• For up to 200 series tires• Made of raw, heavy 18-gauge steel699900 Sold each . . . . . . . . . . . . . . . . . . . . . . .$250.9916Doss ‘Rocket’ Rear Fenders• Made of 18 gauge steel• Matches the customized Rick Doss ‘Rocket’ bike• Fenders must be drilled and fitted before painting• All fenders have a 153/4"-radius46711 Measures 71/4"-wide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$305.0946712 Measures 81/2"-wide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$305.1946713 Measures 9"-wide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$279.9946714 Measures 11"-wide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$279.99Doss ‘Rocket’ Front Fenders• Made of 18-gauge steel• Matches the customized Rick Doss ‘Rocket’ bike• Fenders must be drilled and fitted before painting62715 Measures 43/4"-wide with a 153/4"-radius for 21"wheels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$182.8962716 Measures 6"-wide with a 133/8"-radius for 16"and low-profile 18" tires . . . . . . . . . . . . . . . .$193.9916.16Prices appearing in this catalog are Suggested Retail Price and are subject to change*

Front FendersApparelBike Kits& TrailersSeats& BagsFootControlsCustom Ducktail Front FenderDesigned for use on Softail ® , Dyna Wide Glide ®and 4-speed FXWG models. This fender offersgreater weather protection than the stock unitand is the perfect fender to use with our‘Heritage Conversion Kit’ when the stock 21"wheel is retained. Includes polished die-castspacers. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$126.4413200 Fits FXST, FXSTC, Dyna Wide Glide ®and 4-speed FXWG models from1980 to presentCustom Ducktail Front Fenderfor Springer Softail ® ModelsStyled after our other Ducktail front fendersthis steel unit will bolt right on in place of theOriginal Equipment fender and provide youwith better weather protection and a moretraditional appearance. Sold unpainted. $109.8913252 Fits FXSTS Springer Softail ® modelsfrom late 1988 thru 1992Note: This fender will not fit with Original Equipment oraftermarket highway bars, and will not fit with 16" frontwheels.Custom Skirted Fender with FlipBased loosely on the skirted early K model frontfender, this timeless classic has been updated tofit all 35mm and 39mm front forks from 1973 topresent. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$109.8913196 Unpainted (53/4" wide)Note: Fender should not be used on bikes equipped withhighway bars.FXR Regulator Relocation BracketKeeps the fender from contacting the regulatorwhen the suspension is compressed. A must forlowered models, and recommended for modelsusing CC #13196. . . . . . . . . . . . . . . . . . . . . . . . . .$15.5946204 Fits FXR models from 1982 thru 1999HandControlsLightingElectricalExhaustIntakeEngineFront Fender Conversion Kitfor Springer ModelsA custom, shortened front fender for a daringnew look. The fender is made from GFK andthen gel-coated. The fender brackets are madefrom billet aluminum, and include all necessarymounting hardware. . . . . . . . . . . . . . . . . . . . .$476.0985432 Fits FX Springer Softail ® models that havebeen converted to 16" front wheels from1991 to present (will not fit FLSTS models)Springer Front Fenderfor Big TwinsAccurate, faithful reproduction of the originalfender. Complete with braces and fender edge‘reveal’. Fits all Big Twins from 1937 thru 1948.26520 Replaces OEM 59000-36(measures 71/2"-wide) . . . . . . . . . . .$113.14Colony Front Fender Mounting KitCadmium-plated reproduction of the stock hardwareused to mount Springer front fenders on1936 thru 1948 Big Twins. . . . . . . . . . . . . . . . .$13.9936105 Complete kit (replaces OEM 59007-50)Front Fender for Deuce Models• Stock front fender replaces OEM #59876-00• Available in black powdercoating primer,ready for paint• Fits Deuce models and Deuce front end kitsfrom 2000 to present668500 Unpainted . . . . . . . . . . . . . . . . . . . . . . .$42.92GasketsTranny& ClutchDrivelinePJThe CountCheatin’ DeathJim Nasi Custom Front FendersLoaded with style that will differentiate your bike from the others.• Featuring 3 different designs• Available in 43/4" or 6" widths• Easy to installSold each . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$177.99Fenders for 18" to 21" Wheels on FXST, FXSTC, Dyna Wide Glide ®and 4-speed FXST Models from 1980 to PresentMeasures 43/4"-wide with a 153/4"-radius630015 ‘The Count’630016 ‘PJ’630017 ‘Cheatin’ Death’Fenders for 16" Wheels on FL Softail ® and Fat Boy ® Models(except FLSTS) from 1986 to PresentMeasures 6"-wide with a 133/8"-radius630020 ‘Cheatin’ Death’Wheels,Tires& BrakesFramesForks& ShocksSheetmetalGeneralFor the Dealer Nearest You, Call: 800-729-333216.17CrossReference

Front Fenders26146668501Front Fenders for Wide Glide ® and Softail ® ModelsA trim, tire-hugging fender with chrome brackets, ready-to-paint. A reproduction of the OriginalEquipment front fender on FXST, FXSTC, Dyna Wide Glide ® and 4-speed FXWG models from 1980to present.26146 Replaces OEM 59924-80 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$58.3926350 Same as CC #26146 except with raw steel mounting bracket . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$43.09668501 Same as CC #26146 except with the bracket welded to the fender instead of rivetedand black powdercoated primer on the fender and the bracket . . . . . . . . . . . . . . . . . . . . . . . . .$31.50Front Fenders for 35mm ForksCustom front fender for the 35mm front forks on FX, FXR and Sportster ® models from 1973-early 1987.Unpainted, and complete with integral chrome-plated brackets. For use with 18", 19" or 21" wheels.26163 Replaces OEM 59031-83 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$57.69240351 Chrome fender with chrome bracket (replaces OEM 59923-80) . . . . . . . . . . . . . . . . . . . . . . . . . . .$46.49Custom Fender for Wide Glide ®Front EndsA bolt-on version that completely replaces thestock front fender on Dyna Wide Glide ® , Softail ®and 4-speed FXWG models from 1980 to present(except Heritage Softail ® , Fat Boy ® and SpringerSoftail ® models). Styled with an added accentbead around its entire edge. These fenders includepolished aluminum spacer blocks, and fitwith 19" or 21" wheels only. . . . . . . . . . . . .$131.9413183 6" wideSheetmetalNarrow Front FendersThese replacement narrow front fenders fit FX, FXR, Sportster ® and Dyna Glide models from 1973 thru1999 with narrow 35mm or 39mm front forks. Available chrome or unpainted with chrome brackets.For use with narrow 18", 19" and 21" rims.240331 Chrome fender and bracket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$46.79240383 Unpainted fender and bracket (replaces OEM 59031-83) . . . . . . . . . . . . . . . . . . . . . . . . . . . .$40.99Fenders forNarrow GlideModelsOriginal-style front fenders for FX, FXR,Sportster ® and Dyna Glide models from 1973to present. Available in a stock replacementversion or with the front tip cut back for atrimmer look. Both fenders are unpainted andinclude chrome brackets and the rivets necessaryto install them.19652 Fender (repl. OEMs 59007-73TB,59111-74) . . . . . . . . . . . . . . . . . . . . . . .$61.4919655 Stock replacement bracket(repl. OEM 59111-74) . . . . . . . . . . . .$25.2919653 Shortened custom fender . . . . . . . .$54.8419658 Shortened custom bracket . . . . . . .$25.2916Fender Mounting Kit for Custom Wide Glide ® Front EndsThis kit is designed to mount a stock type front fender on FX and XL models 1973-1983 when the frontfork has been converted for the Wide Glide ® “look” using the narrow glide tubes.240470 Complete kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$13.74Narrow Front Fenderfor FL ModelsCustom, unpainted steel narrow FXWG-stylefront fender for all 4-speed FL model forks from1949 thru 1984. Includes chrome mountingbrackets, the fender profile is designed to clear18", 19" and 21" tires. . . . . . . . . . . . . . . . . . . .$48.3926159 Unpainted (73/4"-wide)16.18Prices appearing in this catalog are Suggested Retail Price and are subject to change*

Front Fenders & AccessoriesApparelBike Kits& TrailersSeats& Bags240384Front Fender forEarly ‘Touring’ ModelsA precisely-crafted reproduction of the 1954thru 1984 4-speed ‘Dresser’ front fender withproperly rolled edges and structural reinforcement.Will also fit FLT, FLHT, FLHS andRoad King ® models from 1980 to present if nofender lamp is desired and additional trimholes are drilled. . . . . . . . . . . . . . . . . . . . . . . .$111.6913193 Unpainted steelFront Fenders for 4-Speed ModelsOur replacement steel fenders fit all 4-speed FLmodels from 1954 thru 1984, and have all of thecorrect holes and dimples for fender trim and tiplights. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$91.39240384 1979-1980 style (replaces OEM 59101-79A)240380 1981-1984 style (replaces OEM 59093-79)Chrome Fender Spacersfor Jesse James FendersMade from billet aluminum by A B Tech.Necessary when using Jesse James or other customfenders on Wide Glide ® front ends.38924 Ribbed (pair) . . . . . . . . . . . . . . . . . . . .$83.4438925 Smooth (pair) . . . . . . . . . . . . . . . . . . .$66.69FootControlsHandControlsLightingElectricalExhaustR DIFront Fenders for HeritageSoftail ® ModelsReplacement fender without holes and dimplesfor custom applications, i.e. early style fendertips. Heavy-duty braces are riveted to fendershell. Fits Heritage Softail ® models from 1986 topresent, as well as all Fat Boy ® models when afull fender is desired.13251 Smooth-style fender . . . . . . . . . . .$155.64Exact duplicate of Original Equipment fenderwith all holes and dimples for stock lightedfender tips as well as upper and lower trim.Heavy-duty braces are riveted to fender shell.Fits Heritage Softail ® models from 1986 to present,as well as all Fat Boy ® models when a fullfender is desired.13255 Stock replacement fender(repl. OEM 59129-86) . . . . . . . . . . .$172.74Chrome Billet Fender SpacersEliminate the need to spread fender bracketsand possible damage to custom paint withmachined aluminum custom brackets.Sold in pairs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$95.6444559 Fit 35 or 39mm ‘Mid Glide’ forks44560 Fit 35 or 39mm Wide Glide ® forks44561 Fit 41mm ‘Mid Glide’ forks44562 Fit 41mm Wide Glide ® forksRick Doss, Inc.Doss Fender Spacer KitChrome spacer kit for all Wide Glide ® front ends.Set consists of 8 pieces total. Comes with four1"-tall cone shape pieces and four .25"-thickflat pieces. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$90.64620001 Sold as setIntakeEngineGasketsTranny& ClutchDrivelineWheels,Tires& BrakesSteel Front Fenderfor Fat Boy ® ModelsGet the great Fat Boy ® look on your HeritageSoftail ® model, or replace damaged fenderson Fat Boy ® models from 1990to present. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$84.4978312 Replaces OEM 59139-89Chrome Universal BracketsThere’s always a need for helpful items whenbuilding a bike. Brackets have 5/16" x 24 threadedhole and 3/8" unthreaded hole. . . . . . . . . . . .$7.9913258 Sold in pairsZCB Fender Mounting KitsIncludes polished stainless steel countersunksockethead screws and polished billet aluminumcountersunk washers. . . . . . . . . . . . . . . . . . . . .$84.1986667 Rear fender mounting kit86668 Front fender mounting kit for FX forks86669 Front fender mounting kit for FL forks686728 Universal kitFramesForks& ShocksSheetmetalGeneralFor the Dealer Nearest You, Call: 800-729-333216.19CrossReference

Rear FendersFat Bob Rear Fenders forSoftail ® and FXWG ModelsExact duplicates of the Original Equipmentparts. They have all of the wire loom clips andnecessary strut mounting holes, and acceptstock taillight assemblies as well as our custom‘Cateye’ and ‘Lucas’ taillights and bracketswhich can be found in Section 5.Fenders15739 Fits FX Softail ® models from 1997 thru 1999 (repl. OEM 59753-97) . . . . . . . . . . . . . . . . . . . . . .$118.7913206 Fits FX Softail ® models from 1984 thru 1996 (repl. OEM 59914-86A) . . . . . . . . . . . . . . . . . . . . . .$86.7426433 Fits 1980 thru 1986 FXWG models (repl. OEM 59904-80) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$83.59Taillights and Brackets26434 Black taillight bracket for models thru 1996 (repl. OEM 59993-80) . . . . . . . . . . . . . . . . . . . . . . .$37.0926494 Chrome taillight bracket for models thru 1996 (repl. OEM 59993-80TA) . . . . . . . . . . . . . . . . . .$52.8426100 Taillight assembly for models thru 1996 (repl. OEM 68008-73A) . . . . . . . . . . . . . . . . . . . . . . . . . .$37.991320913208Fat Bob Rear Fender for FXR ModelsFits FXR models from 1982 thru 1986 and 1987thru 1992 FXRTs.13184 Fender only . . . . . . . . . . . . . . . . . . . .$93.99Fat Bob Fender and Taillight Kitfor FXR Models• Custom Fat Bob styling• 3 piece kit includes Fat Bob fender, Fat Bobtaillight and deluxe taillight bracket• Features flush-mount taillight positioning• Bolts easily to all stock fender struts• Compatible with Original Equipmentand CC sissy bar kits13250 Fits all FXR models from 1982thru 1994 . . . . . . . . . . . . . . . . . . . . . .$237.8919755 Replacement taillightmounting bracket . . . . . . . . . . . . . . .$59.89Sport Bob Rear Fender Kits for Sportster ® ModelsThese exclusive fender kits include a new ABS plastic fender extension for the front of the fender, aCateye taillight assembly with mounting bracket and the extra pop rivets necessary to reinstall yourcircuit breaker clips. They looks great when combined with the CC #25576 one-piece Sport Bob gastanks found elsewhere in this catalog section.13209 Fits Sportster ® models from 1994 thru 2003 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$155.9913208 Fits Sportster ® models from 1982 thru 1993 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$155.99Sheetmetal16Custom Fat Bob Rear FendersOriginal style universal and custom applicationfenders. Available with left or right-handchain cutaway and with or withouttaillight mount. Fenders measure approx.38"-long, 7"-wide and 51/2"-deep. We recommendusing a CC #19762 Cateye taillight with CC #13181 fender. Fenders are unpainted.Left Chain CutawayFits all Big Twin models and bikes with the chain on the left side.13178 Without taillight mount . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$71.99Right Chain CutawayFits Sportster ® models in custom frames and bikes with the chainon the right side.13179 Without taillight mount . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$71.9913181 With taillight mount . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$86.74Fender SupportA chrome support brace designed for use with custom Fat Bob fenders when installing them on rigidframes.08950 Chrome fender support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$31.9916.20Prices appearing in this catalog are Suggested Retail Price and are subject to change*Fat Bob Fender for Softail ® ModelsA value-priced alternative to our other sheet metalofferings. Fits all FX Softail ® models from1984 thru 1995. . . . . . . . . . . . . . . . . . . . . . . . .$74.4978314 Replaces OEM 59914-86AQuickbob Rear Fenderfor FX ModelsCustom rear fender for an easy, affordable conversionto the Fat Bob look. Fits stock 4-speed FXframes and uses the stock width fender struts.Cannot be used as a replacement fender forFXWGs. Heavy-gauge metal for lasting service.13188 Fits FX models from 1973 thru 1985(except FXWG, FXST) . . . . . . . . . . . . .$91.84

Rear FendersApparelBike Kits& TrailersSeats& BagsFootControlsHandControlsLightingWide Rear Fender Conversion Kits for Softail ® ModelsWidens the rear section of your favorite model for a great new, look. Thesekits are suitable for wide rear tires including the 230-series Avon tire and willfit all stock and Santee ® frames (298mm wide). The fender works great withLe Pera ‘Bare Bones’, ‘Silhouette Solo’ and Corbin ‘Hollywood’ solo seats.Each kit comes with TÜV-approval, gel-coated GFK fender, steel fender strutsand all hardware. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$551.3985438 Fits Softail ® models from 1984 thru 199986503 Fits Softail ® models from 2000 to presentElectricalExhaustIntakeEngine‘Ground Pounder’ Straight Cut Rear Fenderfor Softail ® ModelsHeavy-gauge steel rear fender with straight-cut sides. Come undrilled topermit customizing and give 135º wheel coverage. Include two built-in wiretunnels for routing of wiring as well as adding extra strength and rigidityto the fender. Fit all Softail ® models with wide frames. . . . . . . . . . . .$277.3906740 11"-wideNote: Fenders need to be fitted and all clearances checked before painting.Round Cut Rear FenderSleek looking, heavy-gauge steel rear fenderwith round-cut sides. Come undrilled to permitcustomizing. They give 175º of wheel coverageand have two built-in wire tunnels for routingwire and adding extra strength to the fender.Covers 120 thru 180-width tires. Fit all Softail ®models with wide frames. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$302.3406733 81/2"-wideNote: Fenders need to be fitted and all clearances checked before painting.‘Roll-Your-Own’ Custom Blank Steel Fenders• Fabricate your own custom fenders with these blank steel fenders• Made just for the custom bike builder or experienced metal-worker• Permit you to cut, style and create your own front and/or rear fenders• Raw steel finish in smooth-side and round-top versions• Compatible with wheels from 16" up to 21"Smooth-Side Front Fenders with 133/8" Radius88171 Measures 6"-wide, accepts 16" wheels . . . . . . . . . . . . . . . . . . . . .$185.99Smooth-Side Rear Fenders with 133/8" Radius88172 Measures 71/4"-wide, accepts 16" wheels . . . . . . . . . . . . . . . . . . .$191.0988173 Measures 81/2"-wide, accepts 16" wheels . . . . . . . . . . . . . . . . . . .$257.9988174 Measures 9"-wide, accepts 16" wheels . . . . . . . . . . . . . . . . . . . . .$257.9988175 Measures 101/2"-wide, accepts 16" wheels . . . . . . . . . . . . . . . . . .$281.2988176 Measures 11"-wide, accepts 16" wheels . . . . . . . . . . . . . . . . . . . .$281.19Smooth-Side Front Fenders with 153/4" Radius88177 Measures 43/4"-wide, accepts 19" to 21" wheels . . . . . . . . . . . .$202.6988178 Measures 6"-wide, accepts 16" to 18 " wheels . . . . . . . . . . . . . .$185.99Smooth-Side Rear Fenders with 153/4" Radius88179 Measures 71/4"-wide, accepts 16" to 18" wheels . . . . . . . . . . . .$191.0988180 Measures 81/2"-wide, accepts 16" to 18" wheels . . . . . . . . . . . .$257.9988181 Measures 9"-wide, accepts 16" to 18" wheels . . . . . . . . . . . . . .$281.0988182 Measures 101/2"-wide, accepts 16" to 18" wheels . . . . . . . . . . .$257.9988183 Measures 11"-wide, accepts 16" to 18" wheels . . . . . . . . . . . . .$257.99Round-Top Rear Fenders with 133/8" Radius88184 Measures 71/4"-wide, accepts 16" wheels . . . . . . . . . . . . . . . . . . .$202.7988185 Measures 81/2"-wide, accepts 16" wheels . . . . . . . . . . . . . . . . . . .$281.0988186 Measures 9"-wide, accepts 16" wheels . . . . . . . . . . . . . . . . . . . . .$281.1988187 Measures 101/2"-wide, accepts 16" wheels . . . . . . . . . . . . . . . . . .$281.0988188 Measures 11"-wide, accepts 16" wheels . . . . . . . . . . . . . . . . . . . .$281.09GasketsTranny& ClutchDrivelineWheels,Tires& BrakesFramesForks& ShocksSheetmetalGeneralFor the Dealer Nearest You, Call: 800-729-333216.21CrossReference

Rear FendersDresser-Style Rear Fenders for FXR ModelsThese steel fenders mount between the stock fender struts of all FXR modelsfrom 1982 thru 1994, and are available smooth or with a mount for thelate-style taillight. Original Equipment and CC sissy bar kits may be usedwith these fenders. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$141.2913249 With 1973-up taillight mount (shown)13248 With no taillight mountFlip-Up Fender for FXR ModelsFender fits all FXR models from 1982 thru 1986, and 1987 thru 1992 FXRTs.13182 Flip up fender ONLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$164.49Note: This fender will require modifications to permit it to mount correctly to the OriginalEquipment fender struts.259332593125932Sheetmetal16Rear Fenders for FX ModelsDetailed reproductions of the Original Equipment4-speed FX rear fenders from 1973 thru1985. Available with or without mountingbracket for 1973 to 1998 taillight assembly.25931 Original style with light mount . . .$73.5925932 Original style without mount . . . .$70.2925933 Custom bobbed . . . . . . . . . . . . . . . . .$75.29Note: Taillight, visor and license mounting bracket are notincluded and are shown for illustration purposes only.Hinged Rear Fender forFX ModelsNarrower version of the hinged FL rear fenderthat bolts between the stock fender struts on 4-speed FX models from 1973 thru 1985. Itrequires no additional hardware or parts, andthe narrow fender complements the trim stylingof the FX while the hinged portion permits easyaccess to the rear wheel for servicing.Unpainted. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$143.4913194 With no taillight mountCustom Rear Fender for FX ModelsThis bobbed steel rear fender fits 4-speed FXmodels with stock struts from 1973 thru 1985.May be used with a variety of custom taillights.61/2"-wide. Unpainted steel. . . . . . . . . . . . . .$70.49240422 Bobbed fenderHingedRear Fendersfor FL SwingarmsThese two-piece hingedfenders fit all 4-speed Big TwinFL frames from 1958 thru 1984.One version is smooth with no taillight mountand the other has the 1973-up mount, permittingthe use of a variety of taillights. They alsofit FX models if FL struts are used and can beadapted to FXWGs. A slight dent must be madein the front right lower corner of the fender toclear the FXE battery box. Unpainted steel.13186 With no taillight mount(repl. OEM 59604-65A) . . . . . . . . . .$132.9913214 With 1973-up taillight mount(repl. OEM 59604-69B) . . . . . . . . . .$151.24One-Piece Rear Fendersfor FL ModelsAccurate reproductions of the one-piece rearfenders on 4-speed FL models from 1980 thru1984. One version is smooth with no taillight orturn signal mounts, and the other has the 1973-up taillight mount (but no turn signal mounts).Fender strut mounting holes are already drilled.13189 With no taillight mount . . . . . . .$116.4913212 With 1973-up taillight mountbut no indentations for theturn signal mounting bar . . . . . .$132.99Rear Fender for FXR ModelsStock replacement rear fender for FXR modelsfrom 1982 thru 1999 (except FXRT models).Unpainted steel. . . . . . . . . . . . . . . . . . . . . . . . . .$74.49240425 Replaces OEM 59634-81A16.22Prices appearing in this catalog are Suggested Retail Price and are subject to change*

Rear FendersApparelBike Kits& TrailersSeats& BagsRigid Rear Fender for Big TwinsAn accurate reproduction of the rigid rearfender used on 1936 thru 1948 overhead valveBig Twins. Perfect in detail and complete withbrackets ready to bolt-on. Unpainted. . . .$147.7913187 Replaces OEM 59604-39Custom Rear Fendersfor Softail ® ModelsSold exclusively by Custom Chrome ® , and havean early-style ‘reveal’ stamped in the rear tips.Installation requires the removal of 5" from thestruts. Two decorative end caps are supplied tofinish off the shortened struts. Fit all 5-speedSoftail ® models from 1986 thru 1999.13253 With 1973-1999 taillight mount . .$136.3913254 With no taillight mount . . . . . . . . .$113.1413260 Replacement end caps(sold in pairs) . . . . . . . . . . . . . . . . . . . . .$41.89Note: 1997 and newer models require modification and/orrelocation of OEM fuse box. The stock turn signals must berelocated, and the saddlebags on FLSTC models cannot bereinstalled due to the shortened fender struts.78345Replacement Rear Fendersfor Softail ® ModelsDuplicates of the fenders fitted to HeritageSoftail ® models. Features turn signal mountingholes and includes the taillight mount and fenderreveal. It’s ready to use as a replacement item orfor FXSTs converting to full fenders. Also availablein a smooth version with only fender strutholes in it for custom taillights. . . . . . . . . .$142.84Note: 1997 and newer models require modification and/orrelocation of OEM fuse box13207 Stock style. Fits all Heritage Softail ®models from 1986 thru 1996(repl. OEM 59126-86B)13211 Smooth style. Fits all Softail ® modelsfrom 1984 thru 1996 as a custom fender1965125213FootControlsHandControlsLightingElectricalExhaust78347IntakeRigid Rear Fender for 45sAn accurate reproduction of the rigid rear fender.Perfect in every detail and comes complete withbrackets ready to bolt on. . . . . . . . . . . . . . .$146.1413191 Fits 1937 thru 1946 45" TwinsReplacement Rear Fendersfor Softail ® ModelsAccurate reproductions of their OriginalEquipment counterparts. They’re pre-drilled forthe fender struts and license plate mount, andhave the taillight mount in place. They fit allSoftail ® models from 1984 thru 1996. Availablewith or without provisions for the turn signalbar.78345 Without mounting holes for turn signalbar (repl. OEM 59596-89) . . . . . . . .$115.9978347 With mounting holes for turn signalbar (repl. OEM 59126-86) . . . . . . . .$115.99240469 Vintage rear fender without taillightand turn signal mounts . . . . . . . . . . . . . .$125.99$125.9926095Rear Fendersfor Early Sportster ® ModelsSteel rear fenders with stock mounting holes inthe sides for Sportster ® models from 1959 thru1978. Available with or without taillight hole.We also have a shortened ‘Bobbed’ fender. Bothstyles look very good with either CC #19644‘Tombstone’ or CC #26357 ‘Beehive’ taillights.25213 Without taillight hole . . . . . . . . . .$95.1426095 Fits models from 1959 thru 1972(repl. OEM 59611-67A) . . . . . . . . .$98.9926096 Fits models from 1973 thru 1978(repl. OEM 59611-73A) . . . . . . . . .$86.7419651 Bobbed style . . . . . . . . . . . . . . . . . . .$98.99EngineGasketsTranny& ClutchDrivelineWheels,Tires& BrakesAfterFramesRigid Rear FenderBeforeA replacement rear fender for rigid frame BigTwins from 1949 thru 1957. Includes braces andRear Fender Hinge Coverhas holes drilled for the seat clip. Rear section isnot drilled to permit choice of taillamp.The perfect accessory to hide chipped or damagedpaint on your rear fender hinge. This cover. . .$126.3926524 Replaces OEM 59612-41Sidecar Rear Fenderis made of billet aluminum and then highly polished.A very accurate reproduction of the OriginalSpecial set screws engage the hinge for aEquipment sidecar fender used on Big Twins positive lock. Includes hinge cover, hinge pin,from 1936-early 1967. The brackets and thegasket and hardware. Fits hinged rear fendersfender are made of heavy-gauge steel. . .$167.74 1958-1999. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$40.9913190 Replaces OEM 87900-34A240081 Sold eachFor the Dealer Nearest You, Call: 800-729-333216.23Forks& ShocksSheetmetalGeneralCrossReference

Rear Fenders & AccessoriesWide Fendersfor Rigid FramesCustom flat fenders made of heavy-duty14-gauge steel in wide widths to cover that reallybig rubber.95073 71/2"-wide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$41.2995074 81/2"-wide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$42.8995075 9"-wide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$43.7412459Wide Fender SupportsChrome-plated braces designed specifically for wide rigidframes with flat fenders. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$37.9995070 Fits 71/2"-wide fenders95071 Fits 81/2"-wide fenders95072 Fits 9"-wide fenders12457Sheetmetal16Universal Steel Rear Fendersand SupportsFendersAvailable in 5" or 6" widths. Great fortrailers too.12457 5" wide . . . . . . . . . . . . . . . . . . .$37.1912459 6" wide . . . . . . . . . . . . . . . . . . .$35.690895012463Fender SupportsFor use when installing 5" or 6" flatfenders on rigid frames.12462 Plain . . . . . . . . . . . . . . . . . . . . . .$21.4912463 Chrome . . . . . . . . . . . . . . . . . . .$30.49Rear Fender SupportsSteel fender braces for 5" or 6" flatfenders or Fat Bob rear fenderswhen installed on rigid frames.12462 Plain supportfor flat fender . . . . . . . .$21.4912463 Chrome supportfor flat fender . . . . . . . .$30.4908950 Chrome support forFat Bob fender . . . . . . .$31.99Note: CC #’s 12462 and 12463 are for use withCC #’s 12457 and 12459 flat fenders.K&N Reinforced Rubber Fender Washers1"-diameter round rubber washers have dozens of uses,in addition to the obvious. Allows clean scratch-free, wellcushionedinstallations. Card of 12 packs of 10. .$5.75 per pack22170 Fender washersUniversalFender Clamp12464 Sold each . . . . . . . .$6.4916.24Prices appearing in this catalog are Suggested Retail Price and are subject to change*

Fender Tips & TrimApparelBike Kits& Trailers240077240071Eagle Head Fender OrnamentThis die-cast fender ornament is highly detailedand come with illuminated eyes. The illuminatedversion is internally lit with 2 independent12V light bulbs which can be connected to theturn signals or running lights. Fits FL, FLT andFLHT models 1980-1999 and many custom applications.240071 Illuminated eyes with gold accentedbeak . . . . . . . . . . . . . . . . . . . . . . . . . . . .$27.49330297 Replacement 12 volt bulb assembly. FitsCC# 240071. Sold in pack of 5 . . . . .$9.4927824 Replacement bulb,12V 2W (box of 10) . . . . . . . . . . .$1.25 each240078Skull Head Fender TrimQuality die-cast trim piece is contoured to matchthe front fender on FL, FLT, FLHT models 1980-1999 and many custom applications. Features ahighly detailed skull head logo with a choice ofchrome or gold trim and 12 volt illuminatedeyes.240077 Chrome with illuminated eyes . . . .$36.49240078 Chrome with gold trimand illuminated eyes . . . . . . . . . . . . .$46.99Chrome Front Fender TrimFits narrow Wide Glide ® , Sportster ® and FXRstyle fenders. . . . . . . . . . . . . . . . . . . . . . . . . . . . .$15.49240540 Sold eachSeats& BagsFootControlsHandControlsLightingElectricalExhaust275252752627527Eagle’s Head Fender OrnamentsThese chrome-plated die-cast ornaments will fit just aboutany front fender after you drill the two mounting holes.They’re 61/2"-long and come complete with thick rubbermounting gaskets and hardware.27526 All chrome . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$24.4927527 Chrome with gold accents on the beak, eyesand plume . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$37.9927525 Chrome with gold accents on the beak and eyes(repl. OEM 91569-89) . . . . . . . . . . . . . . . . . . . . . . . . .$25.99Chrome Fender Tipsby National CycleSturdy, die-cast fender tips provide that classiclook for Softail ® and Wide Glide ® fenders.27437 Front for Fat Boy ® modelsfrom 1990 to present . . . . . . . . . . . .$64.9927438 Rear for Fat Boy ® modelsfrom 1990 to present . . . . . . . . . . . .$74.94IntakeEngineGasketsTranny& ClutchDrivelineWheels,Tires& BrakesChrome Lower Fender Trimfor Big TwinsAn exact reproduction of the lower triminstalled on FL models from 1968 thru 1975, butchrome-plated without the black accents as inthe Original Equipment part. It may be installedon bottom of the stock front fender fitted to allFL, FLT, FLHT and FLHS models from 1949 thru1985. Includes mounting hardware. . . . . . .$24.4926585 Replaces OEM 59233-68Fender Trim for Fat Boy ® ModelsClassic eagle fender trim design is engineeredfor a perfect fit on FLSTF models from 1990 topresent. Includes mounting hardware.26688 Front . . . . . . . . . . . . . . . . . . . . . . . . . . . .$22.5926694 Rear . . . . . . . . . . . . . . . . . . . . . . . . . . . .$23.69Mud Flaps by Ace LeatherThese 50’s-style leather mud flaps have beenupdated with stylish medallions. The undersideis lined with rubber to protect the leather andease in clean-up. They each have three mountingholes for a universal fit. Sold each.50180 ‘Skull’ (polished nickel) . . . . . . . . . . .$49.9950181 ‘8-Ball’ (ceramic medallion) . . . . . .$56.5450182 ‘Iron Cross’ (ceramic medallion) . .$56.54(not available in Europe)50183 ‘Lone Star’ (polished nickel) . . . . . .$44.49240205 ‘Jolly Roger’ (polished nickel) . . . .$49.99FramesForks& ShocksSheetmetalGeneralFor the Dealer Nearest You, Call: 800-729-333216.25CrossReference

Fender Tips & TrimKhrome Werks ® Aristocrat II Rear Fender Rail for HeritageSoftail ® ModelsBased on the trim used on the full-dressedPanheads of the late fifties and early sixties,this American-made part is formed from 3/4"chrome steel tubing and includes mountinghardware and instructions. It will improve thelooks of any Heritage Softail ® but looks bestwhen installed with our front fender rail(CC #31601). . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$92.9931591 Fits all Heritage Softail ® modelsfrom 1986 to presentNote: This part may not be installed in conjunction withCC #31414 trailer hitch.Khrome Werks ®Aristocrat II Fender Railfor Heritage Softail ® ModelsStyled after the rail used on the Panheads of thelate fifties and mid sixties, this American-madetrim is formed from 3/4" chrome steel tubing.Includes hardware to attach it to the frontfender of all Heritage Softail ® models. Looksbest when installed with our Aristocrat II rearfender rail (CC #31591). . . . . . . . . . . . . . . . . . .$88.9931601 Fits Heritage Softail ® modelsfrom 1986 to present2669226693Khrome Werks ® Chrome LowerFront Fender Trim PiecesHighly-polished and chrome-plated lower trimswhich follow the contour of the OriginalEquipment front fenders. These American-madeparts include all mounting hardware. . . . .$23.4931560 Fits FLT, FLHT, FLHS and Road King ®models from 1986 to present(repl. OEM 59231-86) shown31600 Fits all Heritage Softail ® models from late1986 to present (repl. OEM 59235-86)Stainless Steel Fender MoldingPolished stainless steel trim for the original frontand rear fenders from 1939 thru 1948. All moldingstrips are complete with mounting clips.26692 Front (repl. OEM 59200-39) . . . . . . . . . .$69.9926693 Rear (repl. OEM 59882-39) . . . . . . . . . . .$69.9926589265872658726594Sheetmetal16Fender Trim Set for 1949-1956 Big TwinsA complete set of fender trim and fittings that duplicate theoriginal 1949 thru 1956 factory styling. Can be used forrestoration, or to bring a classic look to any FL style frontfender from 1949 to present. Set includes 2 front fender sidetrim spears, front fender lower trim, and front fender tip.26596 Complete trim set (includes CC #’s 26587and 26594) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$49.9926587 Lower trim only (repl. OEM 59207-49) . . . . . . . . . .$12.4926594 Front trim set with side spears(repl. OEM 59205-49, 59215-49) . . . . . . . . . . . . . . . .$36.492658826595Vintage ‘V’ Style Fender Tips and TrimReproductions of the chrome front and rear fender tips and stainless steel trim pieces.The fender tips are die-cast in the ‘V’ design used as Original Equipment from 1959 thru1966. The front fender side trim and front fender lower edge trim are formed in stainlesssteel. Each part includes hardware, and fits all FL front fenders from 1949 thru 1986 andall FL rear fenders from 1958 thru 1986.26586 Front fender trim set (includes CC #’s 26588 and 26595) . . . . . . . . . . . . . . . . . . . .$36.4926588 Front fender tip ‘V’ design (indexed for side spears)as used from 1959 thru 1966 (repl. OEM 59216-59) . . . . . . . . . . . . . . . . . . . . . . . .$27.4926595 Front fender side spear set as used from 1957 thru 1973(repl. OEMs 59205-57 and 59206-57) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$22.9926587 Front fender lower trim as used from 1949 thru 1956(repl. OEM 59207-49) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$12.4926589 Rear fender tip ‘V’ design as used from 1959 thru 1966(repl. OEM 59887-59) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$27.4916.26Prices appearing in this catalog are Suggested Retail Price and are subject to change*

Fender Trims & AccessoriesApparelBike Kits& TrailersSeats& BagsFootControlsRear Fender Extensionfor Softail ® ModelsImproves the overall appearance of this area onthe bike. It is made in the U.S.A. from black,paintable high-impact A.B.S. plastic, and whenpainted to match the fender and properlyinstalled, this fender extension gives the appearanceof the fuller and rounder long fendersused on rigid framed Big Twins. . . . . . . . .$44.9913228 Fits all 5-speed Softail ® modelsfrom 1986 to presentNote: It will be necessary to drill mounting holes and circuitbreaker clip holes for installation.Chrome SpeedometerCable GuideInstall this guide to keep your paint from beingscratched.65162 Fits most models . . . . . . . . . . . . . .$29.35Doss Taillight Adapter Bracketfor Twin Cam 88 ® ModelsTired of being stuck with the stock taillighton your 1998 and newer model, because ofthe way the Original Equipment rear fender ismade? Well, here’s the fix. The Doss taillightadapter permits the use of virtually anycustom taillight, such as the Aurora or Dosswide Tombstone, on 1998 and later modelsequipped with ‘circuit board’ taillights. . .$24.6946642 Taillight adaptor bracketHandControlsLightingElectricalExhaustIntakeKhrome Werks ® Rear FenderAccents for Softail ® ModelsAttach with double-sided automotive-gradeadhesive tape to the rear fender above thestruts of all Softail ® models. They werespecially-designed for Heritage Softail ® modelswith saddlebags to give them an early-stylerigid-mount look. Sold in sets. . . . . . . . . . . .$43.9931660 Fit Softail ® models from 1984 to present‘Zenrail’ Mount Kitfor Buell ® X-1 ModelsThis kit permits you to use bungie cords withoutdamaging your bike’s tail section. To use saddlebags,protectorplates are required which areavailable in composite or aluminum, and aresold separately. A marker light kit which installsat the ends of the Zenrail tubes is also availableseparately, as well as a replacement cleat andbolt kit.50095 Zenrail mount kit . . . . . . . . . . . . . . .$260.8450096 Composite protector plates(sold in pairs) . . . . . . . . . . . . . . . . . . . .$40.4450097 Aluminum protector plates(sold in pairs) . . . . . . . . . . . . . . . . . . . .$60.5950098 Marker lights (sold in pairs) . . . . . .$56.1450099 Replacement cleat and bolt(sold each) . . . . . . . . . . . . . . . . . . . . . . .$4.49Gold ‘V’ EmblemsCurved to fit front and rear fenders, these diecastzinc emblems have self-adhesive backs thatmount easily to your bike. They measure approx.21/2"-wide and 11/2"-tall. Sold each. . . . . .$10.9910905 GoldEngineGasketsTranny& ClutchDrivelineWheels,Tires& BrakesFramesForks& ShocksSheetmetalGeneralFor the Dealer Nearest You, Call: 800-729-333216.27CrossReference

Gas Tanks for Sportster ® ModelsApparelBike Kits& Trailers15795Seats& BagsFootControlsHandControls1579615783Rubber Mounted 'King' Tanks for Sportster ® ModelsClassic good looks of the original ‘Peanut’ tank, but with increased capacityfor an extended cruising range. We took our best-selling 3.25-gallon capacity‘King’ tank and added rubber mounts to the front and rear. By isolatingthe tank, we’ve reduced stress on the tank mounts for increased durability.CC #15643 features the updated petcock location that was introduced in1995. Require vented screw-type gas caps. . . . . . . . . . . . . . . . . . . . . . . . . .$257.8415643 Fits Sportster ® models from 1995 thru 2003 (repl. OEM 61208-95)25573 Fits Sportster ® models from 1982 thru 1994 (repl. OEM 61203-87)LightingElectricalExhaustNote: Fuel tanks, particularly where custom paint is planned, must be pressure-tested, thensealed with tank prep (CC #3991012) and Kreem (CC #3991008) before painting, to protectthe final finish and prevent internal rust during winter storage.IntakeEngineGasketsOne-Piece Sport Bob Gas TanksGive your bike a sharp, new look with these Sport Bob gas tanks. Theyfeature bolt-in, locking aircraft-style gas caps and rubber-mounting toisolate them from vibration. Include all brackets, hoses and necessaryhardware for proper installation. Fit all Sportster ® models from 1982thru 1998 (except XL1200S models).15795 Standard Sport Bob gas tank (holds 3.0 gallons) . . . . . . . . . . .$412.0915796 2" stretched Sport Bob gas tank (holds 3.5 gallons) . . . . . . . .$464.7415783 Replacement bolt-in vented aircraft style gas cap with lock . .$68.49Smooth-Bottom Tanks for Sportster ® ModelsAn updated design with a 3.3 gallon capacity and rounded lower edges.Very similar to the latest factory design, but with petcock locations andmounts for early or late frames. Includes mounting hardware. . . . . . .$188.4915665 Fits Sportster ® models from 1995 thru 200315664 Fits Sportster ® models from 1982 thru 1994Tranny& ClutchDrivelineWheels,Tires& BrakesFramesForks& ShocksSport Bob Tank Upgrade KitEverything you need when upgrading your Sportster ® model toSport Bob tanks. Includes, coil bracket, choke bracket, switchcover, horn relocation bracket and hardware. . . . . . . . . . . . . .$36.8425570 For use with CC #’s 25576, 25580 and 25586Sport Bob tank kitsSheetmetalGeneralFor the Dealer Nearest You, Call: 800-729-333216.29CrossReference

Gas Tanks for Sportster ® Models‘King’ Tanks for Sportster ® ModelsAdd a new look to your Sportster ® model withthese stylish gas tanks. Available with an aircraft-stylebolt-in cap. Includes all mountinghardware. Holds approximately 3.3 gallons.15793 Fits all Sportster ® modelsfrom 1982 thru 1994 . . . . . . . . . . . .$295.9915794 Fits all Sportster ® modelsfrom 1995 thru 2003 . . . . . . . . . . . .$295.99Replacement Gas Cap15784 Mini bolt-in vented aircraft-stylegas cap with lock . . . . . . . . . . . . . . . . .$60.99‘King’ Tanks for EarlySportster ® Models2"-wider than the ‘Standard’ tank... enoughto give extra mileage and just wide enough tomake them look great. These high tunnel tanksare equipped with stock mounts but do notinclude mounting hardware. They have a 3.1gallon capacity. . . . . . . . . . . . . . . . . . . . . . . . . . .$125.3919639 Fits all models from 1955 thru 197825574 Fits all models from 1979 thru 1981‘King’ Tank with Flush-MountGas Cap for Sportster ® ModelsTrue to the original look and shape of the stocktank but features a locking flush-mount gascap. Bolt-on installation, and includes gas capand two keys. 3.25 gallon capacity. . . . . . .$209.8415650 Fits all Sportster ® modelsfrom 1982 thru 199415670Sheetmetal16Stretched One-Piece Fat BobGas Tanks for Sportster ® Models• Features a 2"-stretch• 3.5 gallon capacity• Available in a smooth-top and dash mountversions• Single or dual screw-in caps (not included),dual cam-style caps (not included)• Single or dual flush aircraft-style capswith locks are includedSmooth-Top for Late ModelsFit all Sportster ® models from 1982 thru 2003(except XL1200S models).15670 With dual screw-in bungs . . . . . . .$506.5915673 With a single screw-in bung . . . . .$460.1915218 With dual flush locking caps . . . .$364.3915219 With a single flush locking cap . .$352.24Dash-Mount for Late ModelsFit all Sportster ® models from 1982 thru 2003(except XL1200S models).15226 With dual screw-in bungs . . . . . . .$304.9915684 With dual flush locking caps . . . .$591.09One-Piece Sportster ® Tank Hardware Kit610004 Works with all tanks listed above .$80.99Smooth-Top for Early ModelsFits all Sportster ® models from 1957 thru 1976.27588 With dual cam-style caps . . . . . . . .$425.99Dash-Mount for Early ModelsFits all Sportster ® models from 1957 thru 1976.15682 With dual cam-style caps . . . . . . . .$461.99Custom ‘Bobber Style Gas Tanks’ by Cole FosterAn absolutely beautiful new tank designed with the keen styling of Cole Foster - Salinas Boyz Customs.The tank started life on the hugely popular Blue Bobber Bike, seen in almost every motorcycle publicationin 2002. The tanks feature a mini pop-up gas cap, and a unique raised tapered bead down thecenter of the tank. Each tank has been designed to fit to stock frames but can also be easily adaptedto any custom application. They use the existing stock rubber mounts or are included as needed.Fuel capacity is 2.35 gallons. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$499.99600155 Fits Evolution ® Softail ® models from 1984 thru 1999 and 4-speed FX and FL modelsNote: These applications require the front frame dash mount to be cut off and rear screw hole modified.600157 Fits Twin Cam 88 ® Softail ® models from 2000 to present600154 Fits Sportster ® models from 1982 thru 200316.30Prices appearing in this catalog are Suggested Retail Price and are subject to change*

Custom Gas TanksApparelBike Kits& Trailers260316Seats& BagsFootControls260318HandControlsLighting260317Gas Tanks by LA ChoppersTanks are fabricated from heavy gauge steel.Features right side petcock with 22 mm bung.Includes mounting tabs and brackets. IncludesHot Match pop-up gas caps. . . . . . . . . . . .$1,205.00Note: Tank kits will require some welding.260316 5.2 gallon pointed gas tank foruniversal/custom applications. 271/2"long, 13"-wide, 9"-tall, 5" tunnel260317 4.6 gallon curved point gas tank foruniversal/custom applications. 251/2"-long, 13"-wide, 8"-tall, 51/2" tunnel260318 3.8 gallon coffin gas tank. Fitsuniver-sal/custom applications. 271/2"-long, 12"-wide, 9"-high, 41/2" tunnelAluminum Gas Tank withOptional ‘Flip-Up’ Dashfor Softail ® ModelsDramatically improve the looks of yourSoftail ® model with this bolt-on, stockreplacement, gas tank. Hand-made in Englandfrom 18-gauge aluminum, this tank permitsyou to retain your Original Equipmentkeyswitch, speedometer and dash lights. An innovative, removable aluminum dash is optional, andcompletely hides the filler cap for a smooth look. A kit that lets you re-use your stock dash is alsoavailable. If you prefer to run a bike with no clutter, then you can order the gas tank alone for alow-profile custom look. Works with all Bolt-in Aircraft-Style gas caps (CC #’s 08660 and 08661)listed below (not included). Fits all Softail ® models (except Deuce models) from 2000 to present.86613 Gas tank . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$1,419.0086614 Dash kit with hardware . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$178.9986616 Hardware kit for re-using the Original Equipment dash . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$169.99Aircraft-Style Gas Cap SetsLow profile high-tech gas caps. Designed to be used with the gas tanks above. Kits include mountingring, gasket, screws and cap. Sold each.08661 Locking vented cap kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$63.4908660 Non-locking vented cap kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$52.99ElectricalExhaustIntakeEngineGaskets260700Tranny& Clutch260700DrivelineWheels,Tires& Brakes260701Frames260701Forks& ShocksCoffin Tanks by PaughcoPaughco, a long time leader in producing custom parts captures the essence of the sixties era chopperwith the new release of these outstanding coffin tanks. These tanks are for custom applications.260700 2.5 gallon, 21" length, 12” width, 7" tall, low tunnel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$569.99260701 4.0 gallon, 251/2" length, 12" width, 9" tall, high tunnel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$629.99SheetmetalGeneralFor the Dealer Nearest You, Call: 800-729-333216.31CrossReference

Paul Yaffe Gas Tanks‘Zombie’ Gas Tankby Paul Yaffe OriginalsA totally unique shape that sets off anunusual and unique look. It is a replica of theSportster ® tank but stretched, raked, wedged and raisedso the profile and tunnel looked like it was poured over PYO’s chopperframes. With a 251/2"-long tunnel, this tank fills every inch of the Chopperframe backbone and matches the angle of the cradle rails perfectly. Theretro-look is sure to please. Includes weld-on mounting straps. . . . . .$874.7906573 For custom applications‘Zombie II’ Gas Tankby Paul Yaffe OriginalsZombie tank design has been very popular amongstbike builders and custom shops. The ‘Zombie II’ is a moreexaggerated version of the original ‘Zombie’ tank to fulfill the need ofchopper designs. Formed from 16-gauge steel and tig welded for strength.Tank includes chopper gas cap and tank mounting straps. Tanks are pressuretested and shipped raw and ready for mock-up, body and paint. Somewelding is required for installation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$1,100.99600074 3.25 gallon ‘Zombie II’ gas tank‘Roadster’ Gas Tankby Paul Yaffe OriginalsThe ultimate look for your custom bike! Tank has a 5" stretchand a perfect teardrop shape. Hydro-formed from 16-gauge steel and tigwelded for strength. Specifically-designed for PYO ‘Roadster’ chassis kits,but may be adapted to many custom applications. Features a flush-mountgas cap, and includes weld-on tank mounting straps. . . . . . . . . . . . . . .$1,069.0006571 For custom applications‘Roadster Lite’ Tank by Paul Yaffe OriginalsA thinner more streamlined version of the full size Roadster tank (CC #06571).• Die-formed from 16 gauge steel• Measures 27"-long with a 4" ‘V’ pocket at the base for frame clearance• Gas cap guaranteed to never leak• Fits custom applications and Softail ® models with custom seatsfrom 2000 to present600008 5 gallon ‘Roadster Lite’ gas tank . . . . . . . . . . . . . . . . . . . . . . . . .$1,069.00Sheetmetal16‘Arrow’ Gas Tankby Paul Yaffe OriginalsA tapered version of the ‘Roadster’ tank.All it took was a wedge of material from thehalves to give the tank a more streamlined profile.Die-formed from 16-gauge steel and each one includesan exclusive pop-up leak-proof gas cap and a pair of tankmounting straps. Measures 26"-long, 121/2" at its widest point,with a 25" tunnel that has a ‘Y’ cut in it’s tail so you can fit a longer tankon a shorter frame. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$995.99600073 5 gallon ‘Arrow’ gas tank‘Super Stretch’ Gas Tank Kit by Paul Yaffe OriginalsThis fantastic new stretched tank kit is created specifically for Softail ® modelsfrom 1999 to present. Adapted from the ‘Roadster’ tank to a stock platformwithout needing any modifications on your frame. You can nowcompletely customize the look of your bike with a high-quality, bolt-on kit.Includes a 16-gauge steel fuel tank, hand upholstered snap-on seat and abracket that allows an ignition switch to be relocated under the tank. Nocutting, no welding just follow the easy instructions. Shipped raw andready for mock-up, body and paint. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$1,699.99600072 3.2 gallon ‘Super Stretch’ gas tank kit16.32Prices appearing in this catalog are Suggested Retail Price and are subject to change*

Paul Yaffe & Stretched Gas TanksApparelBike Kits& TrailersSeats& BagsFootControlsHandControls‘Double Trouble’ Gas Tankby Paul Yaffe OriginalsSimply the most radical production tank ever made! In order tobring the ‘DoubleTrouble’ and ‘Phantom’ chassis to production, asuper stretched tank needed to be created to fit them. Introducing the'Double Trouble' gas tank that fit the 7" stretch chassis designs perfectly!Measures 35"-long, 14"-wide and hold about 6 gallons. The tank has beenpushed so far forward, that the front of the tank covers the cradle rails!Formed from 16-gauge steel and features an exclusive leak-proof Pop-Upgas cap. Factory pressure tested and shipped raw, ready for mock up, bodyand paint. Mounting straps included. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$1,400.00600075 6 gallon ‘Double Trouble’ gas tank‘Villain’ Stretched Gas Tankby Jesse James’• Uniquely-styled tank provides an affordable option in definingyour ultimate hand-built custom chopper• Originally created for use on many West Coast Custom Choppers• Features a long, tapered shape with a raised custom fuel bung• Includes two different caps; 5-bullet style and smooth• Shipped with custom mounting brackets to weld to the frame• Fuel capacity is approximately 3.5 gallons . . . . . . . . . . . . . . . . . . . . . . .$584.5988120 Fits most aftermarket frames with a minimum of a 3" stretchin the backbone and a 4" stretch in the front downtubes(frame backbone diameters cannot exceed 2")601800LightingElectricalExhaustIntakeEngineGasketsTranny& Clutch‘Chopper’ Gas Tankby Paul Yaffe OriginalsCreated for a contemporary look that wouldpreserve the long narrow Chopper line, yet complimentthe technical, down-to-business look of today’s modern Chopper.It is sectioned 5" out of the center more than the Roadster tank andwedged from front-to-rear. This gives it a balanced, streamlined lookthat maintains the Chopper heritage, yet allows the lines of the biketo flow from front-to-rear. Includes weld-on straps. . . . . . . . . . . . . . .$1,069.0006572 For custom applicationsTank Mount Kitby Paul Yaffe OriginalsFeatures two weld-on tank mount straps with grommets and spacers. . .$28.9906575 For custom applications only601803Stretched ‘Super Cruiser’ Steel Gas Tanksfor Custom Applications• Made of heavy-gauge steel for maximum strength and durability• Designed to use pop-up caps or bolt-in cap kits• Tank must be fitted to frame before painting• Available in a 5 or 6 gallon tank with 2" or 5" stretch601800 5 gallon tank with 2" stretch made for pop-up cap . . . . . . . . . .$699.99601801 5 gallon tank with 2" stretch made for bolt-in cap . . . . . . . . . . .$699.99601802 6 gallon tank with 5" stretch made for pop-up cap . . . . . . . . . .$699.99601803 6 gallon tank with 5" stretch made for bolt-in cap . . . . . . . . . . .$699.99Custom Pop-Up Gas Caps47775 Stainless Steel (sold each) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$52.9947777 Chrome (sold each) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$51.49Aircraft-Style Bolt-In Gas CapsComes with mounting ring, gasket, screws and cap.08661 Locking vented cap kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$63.4908660 Non-locking vented cap kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$52.99For the Dealer Nearest You, Call: 800-729-333216.33DrivelineWheels,Tires& BrakesFramesForks& ShocksSheetmetalGeneralCrossReference

Stretched Gas Tanks862546865801526286260Sheetmetal16Custom One-Piece Stretched Tanksfor Softail ® ModelsNo longer is trick paint enough to define a hot custom. But add a customtank and the crowds will pause longer to look at a tricked out bike.Custom Chrome ® offers enough options to satisfy just about any desire.Our 2" stretch tanks are new stampings rather than using welded tipsto achieve stretch. They comewith or without dash recess, singleor dual gas caps, and withflush-mount locking gas caps(included), or for stock-stylescrew-in gas caps (not included).Single cap tanks have inlet offsetto the right side. Tanks with dashrecess use FL-style dashes anddash mounting plates. For theextreme custom Softail ® models,the 4" stretch tanks have weldedwings on the 2" stretch tanks forthe ultimate long, low look. Bikebuilders should note that theseDash-Mount Available15676tanks, while simply bolting on stock tank mounts on the frame, will requireminor finishing (especially with welded tip extensions), and probably a customseat to fit the rear contours of the extended tank. But the effort is wellworth it when the first admirer walks up and asks “how’d you do that?Fit models from 1984 thru 1999. 4.2 gallon capacity.Smooth-Top15262 2" stretch for single screw-in cap (cap not included) . . . . . . . .$474.9915261 2" stretch with dual flush locking caps . . . . . . . . . . . . . . . . . . . . .$385.4415286 2" stretch with single flush locking cap . . . . . . . . . . . . . . . . . . . . .$330.6915680 4" stretch for dual screw-in caps (caps not included) . . . . . . . .$420.4915676 4" stretch for single screw-in cap (cap not included) . . . . . . . .$397.2915681 4" stretch with dual flush locking caps . . . . . . . . . . . . . . . . . . . . .$472.9415687 4" stretch with single flush locking cap . . . . . . . . . . . . . . . . . . . . .$400.49Dash-Mount15688 4" stretch for dual screw-in caps (caps not included) . . . . . . . .$412.5915689 4" stretch with dual flush locking caps . . . . . . . . . . . . . . . . . . . . .$477.59One-Piece Tank Hardware Kit Softail ® Models610003 Works with all tanks listed above . . . . . . . . . . . . . . . . . . . . . . . . . . .$39.99Stretched Aluminum Gas Tanksfor Custom ApplicationsHand-crafted in 18-gauge aluminum for beauty, strength and light weight.Designed to use either Original Equipment or aftermarket screw-in gas capsor flush mount aircraft gas caps (must be purchased separately). Universalmounting for most custom applications. Made in England.‘Druiser’ 4.2 Gallon Capacity for Softail ® -StyleCustom Frames with 2" Stretch86251 ‘Druiser’ for screw-in cap . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$1,187.0086252 ‘Druiser’ for bolt-in aircraft cap . . . . . . . . . . . . . . . . . . . . . . . . . .$1,146.00‘Druiser’ 4.6 Gallon Capacity for Softail ® -StyleCustom Frames with 5" Stretch86253 ‘Druiser’ for screw-in cap . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$1,277.0086254 ‘Druiser’ for bolt-in aircraft cap . . . . . . . . . . . . . . . . . . . . . . . . . .$1,259.00‘Super Cruiser’ 6.0 Gallon Capacity for Softail ® -Style CustomFrames with 5" Stretch86257 ‘Super Cruiser’ for screw-in cap . . . . . . . . . . . . . . . . . . . . . . . . . .$1,277.0086258 ‘Super Cruiser’ for bolt-in aircraft cap . . . . . . . . . . . . . . . . . . . .$1,234.00‘Super Stretch’ 4.2 Gallon Capacity for Softail ® -Style CustomFrames with 2" Stretch86259 ‘Super Stretch’ for screw-in cap . . . . . . . . . . . . . . . . . . . . . . . . . .$1,187.0086260 ‘Super Stretch’ for bolt-in aircraft cap . . . . . . . . . . . . . . . . . . . .$1,146.00‘Super Stretch’ 4.2 Gallon Capacity for Softail ® -Style CustomFrames with 5" Stretch86261 ‘Super Stretch’ for screw-in cap . . . . . . . . . . . . . . . . . . . . . . . . . .$1,277.0086262 ‘Super Stretch’ for bolt-in aircraft cap . . . . . . . . . . . . . . . . . . . .$1,234.00‘Chopper’ 3.2 Gallon Capacity for Softail ® -Style Custom Frameswith 5" Stretch686580 ‘Chopper’ with pop-up gas cap (included) . . . . . . . . . . . . . . . .$1,636.00Aircraft Gas Caps for Aluminum Gas TanksAvailable in either 21/4" or 3"-diameters, these cap kits come completeand ready-to-install with bolt-in retaining rings, and hardware.60285 21/4" vented cap kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$148.0060286 3" vented cap kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$152.0060279 Replacement 21/4" vented cap ONLY . . . . . . . . . . . . . . . . . . . . . . .$106.5060281 Optional 21/4" vented cap with lock . . . . . . . . . . . . . . . . . . . . . . .$117.5060283 Replacement 3" vented cap ONLY . . . . . . . . . . . . . . . . . . . . . . . . .$112.00Note: Fuel tanks, particularly where custom paint is planned, must be pressure-tested, thensealed with tank prep (CC #3991012) and Kreem (CC #3991008) before painting, to protectthe final finish and prevent internal rust during winter storage.16.34Prices appearing in this catalog are Suggested Retail Price and are subject to change*

Stretched & One-Piece Gas TanksApparelBike Kits& Trailers15788Weld-InAircraft-Style BungSeats& BagsFootControls15783HandControlsLightingOne-Piece Stretched Gas TanksSmooth top gas tanks come with a single center-mounted aircraft-style gascap, and are stretched to either 2" or 4". Made of heavy-gauge steel andinspected and pressure-tested to ensure qualityas well as a perfect fit. Replacement bolt-in aircraft-style gas cap available.15787 2" stretched, fits all Softail ® models from 1984 thru 1999,holds 4.2 gallons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$421.8915788 4" stretched, fits all Softail ® models from 1984 thru 1999,holds 4.2 gallons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$547.9915789 2" stretched, fits all FXR models, holds 4 gallons . . . . . . . . . . . .$485.1915792 2" stretched, fits all Dyna Glide models from 1991to present, holds 3.75 gallons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$485.1915783 Replacement bolt-in vented aircraft style gas cap with lock . .$68.49Note: CC #’s 15787, 15788 and 15792 require custom seats due to their longer lengths.CC #15789 will fit with most aftermarket seats.One-Piece ‘Street Pro’ Stretched Gas TanksThese custom narrow stretched tanks have single bungs on the right side ofthe tanks, and there are two different styles to choose from. Formed on allnewtooling to ensure quality, these tanks hold approximately 3.8 gallonsand are stretched 3" more than their stock counterparts. They require customseats, and fit all Softail ® models from 1984 thru 1999.15757 Tank with single screw bung for late 1996-up gas caps . . . . . .$486.1915759 Tank with single weld-in aircraft-style bung (includes cap) . . .$514.19ElectricalExhaustIntakeEngineGasketsTranny& Clutch15273Driveline15263Tanks for Dyna Glide ModelsOur 2" stretch tanks are new stampings rather than using welded tipsto achieve stretch. They come with or without dash recess, single or dualgas caps, and with flush-mount locking gas caps (included), or for stockstylescrew-in gas caps (not included). Single cap tanks have inlet offset tothe right side. Tanks with dash recess use FL-style dashes and dash mountingplates. They fit all models from 1991 to present and hold 3.75 gallons.Smooth-Top Tanks15263 2" stretch for dual screw-in caps (caps not included) . . . . . . . . .$399.9915698 2" stretch for single screw-in cap (cap not included) . . . . . . . . .$372.9915693 2" stretch with dual flush locking caps (caps are included) . . .$493.29Dash-Mount TanksTanks have 3.75 gallon capacity.15694 2" stretch for dual screw-in caps (caps not included) . . . . . . . . .$435.9915679 2" stretch with dual flush locking caps (caps are included) . . .$503.79For the Dealer Nearest You, Call: 800-729-3332Tanks for FXR ModelsOur 2" stretch tanks are new stampings rather than using welded tipsto achieve stretch. They come with or without dash recess, single or dualgas caps, and with flush-mount locking gas caps (included), or for stockstylescrew-in gas caps (not included). Single cap tanks have inlet offset tothe right side. Tanks with dash recess use FL-style dashes and dash mountingplates. Tanks fit all models from 1982 thru 2000 and have a 4.0 galloncapacity. Models with stock turn signals mounted to the top triple tree mustrelocate them to avoid contact with the tank.Smooth-Top Tanks15273 2" stretch for dual screw-in caps (caps not included) . . . . . . . . .$357.9415695 2" stretch for single screw-in cap (cap not included) . . . . . . . . .$314.9915696 2" stretch with single flush locking cap (cap is included) . . . . .$374.19Dash-Mount TanksTanks have 4.0 gallon capacity.15692 2" stretch for dual screw-in caps (caps not included) . . . . . . . . .$331.9915697 2" stretch with dual flush locking caps (caps are included) . . .$408.14Replacement Flush Locking Gas Capsfor Smooth-Top and Dash-Mount Tanks15639 Dual flush locking caps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$56.2915644 Single vented flush locking cap . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$31.5916.35Wheels,Tires& BrakesFramesForks& ShocksSheetmetalGeneralCrossReference

One-Piece Gas Tanks675705675701675703Pro Image I & II Chopper Gas TanksThe latest and greatest one-piece chopper gas tanksavailable! Fabricated from heavy-gauge steel with 4.1or 4.7 gallon capacities. Compliments chopper frames with 4" downtube stretch and 3" backbonestretch. Backbone outer diameter cannot exceed 13/4". Available with screw-in cap, flush cap or raisedcap. Includes rubber mounted weld-on brackets.Pro Image I Chopper Gas Tanks675700 4.7 gallon with screw-in cap . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$399.99675701 4.7 gallon with flush cap . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$399.99675702 4.7 gallon with raised cap . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$399.99Pro Image II Chopper Gas Tanks675703 4.1 gallon with screw-in cap . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$399.99675704 4.1 gallon with flush cap . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$399.99675705 4.7 gallon with raised cap . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$399.99Special Flush Mount Gas Cap675706 Required for CC #’s 675701, 675702, 675704, 675705 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$57.993.3 Gallon Mustang TankThis one piece tank is perfect for a variety ofcustom applications. It has rounded mountingplates front and rear that are welded in place.It features a twin cap look, but the left neckis non-functional, for appearance only. The3.3 gallon capacity tank fills on the right-sideonly. Tunnel measures 21/2"-high x 23/4"-wide.Tank measures181/2"-long x 12"-wide. . .$141.49260143 Unpainted steelNote: All fuel tanks should be test fitted, pressure tested,and pre-sealed before painting.Custom Chrome ® Custom“Low Tunnel” Gas TankThis 2.8 gallon custom tank features a 11/2"-hightunnel with universal style mounts for customapplications. Accepts 3/8" NPT threaded petcock.Tankmeasures 151/2"-long x 9"-wide x7"-high with a 11/2" tunnel. . . . . . . . . . . . .$104.49260121 Unpainted steelNote: All fuel tanks should be test fitted, pressure tested,and pre-sealed before painting.Sheetmetal163859038591Daytec Gas TanksDaytec offers these high-quality 16/14-gauge steel gas tanks in 3.5 gallon and 4.6 gallon capacities.They’re great for aftermarket frames with up to a 2" stretch. Made in the USA. . . . . . . . . . . . . . . .$817.9438587 4.6 gallon, one-piece tank for Daytec ‘Episode’ frames with a 2"-stretch (CC #38528)32273 4.6 gallon, one-piece tank for Daytec ‘Chopper’ frames (CC #’s 32252, 32253, 32260 and 32261)38588 3.5 gallon, one-piece tank for Daytec ‘Episode’ frames with a 2"-stretch (CC #38528)32274 3.5 gallon, one-piece tank for Daytec ‘Chopper’ frames (CC #’s 32252, 32253, 32260 and 32261)38589 4.6 gallon, one-piece tank with a 2"-stretch for the flatside tank mounts on Daytec Softail ® frames with a 2"-stretch38590 3.5 gallon, one-piece tank with a 2"-stretch for the flatside tank mounts on Daytec Softail ® frames with a 2"-stretch38591 4.6 gallon, one-piece with a 2"-stretch for Daytec ‘Skulker’ frames38597 3.5 gallon, one-piece with a 2"-stretch for Daytec ‘Skulker’ frames38695 4.6 gallon, one-piece with a 2"-stretch. Universal fit for 2"-stretched frames38696 3.5 gallon, one-piece with a 2"-stretch. Universal fit for 2"-stretched frames‘Peanut’ Tankfor Sportster ® ModelsA quality reproduction of the Original Equipment2.4 gallon gas tank. . . . . . . . . . . . . . . . .$90.8912724 Fits early Sportster ® and K models from1955 thru 1978 (replaces OEM 61006-63B)Note: All fuel tanks should be test fitted, pressure tested, andpre-sealed before painting.Note: Fuel tanks, particularly where custom paint isplanned, must be pressure-tested, then sealed with tankprep (CC #3991012) and Kreem (CC #3991008) beforepainting, to protect the final finish and prevent internalrust during winter storage.16.36Prices appearing in this catalog are Suggested Retail Price and are subject to change*

Regency Gas TanksApparelU.S. Patent #US 6,478,335 B2Weld-InAircraft StyleBungBike Kits& TrailersSeats& BagsFootControlsHandControlsRegency ‘Adjustable’ One-Piece Stretch Tanks for Softail ® Models• Created by our in-house, master customizer, john reed• Small, sleek one-piece tank with a single screw-in or weld-in bung• All-new adjustable rubber mounting system permits you to slide the tankback-to-front 2", and the front of the tank up and down 2"• Permits you to locate your tank according to your personal tastes• Fuel capacity is approximately 4 gallons• Fits with most Original Equipment and aftermarket seats . . . . . . . . .$308.19Fits all Softail ® Models from 2000 to PresentCan also be installed on Softail ® models from 1984 thru 1999, and Sportster ®models from 1995 thru 2003 with the additional purchase of a mounting kit.46541 Adjustable tank with single screw-in bung for late 1996-up gas caps46543 Adjustable tank with single weld-in aircraft-style bung (includes cap)Tank Mount Kits610000 For Softail ® frames from 1984 thru 1999 . . . . . . . . . . . . . . . . . . . . . . .$49.99610001 For Sportster ® frames from 1995 thru 2003 . . . . . . . . . . . . . . . . . . . . .$39.99LightingElectricalExhaustIntakeEngineGasketsStockTranny& ClutchRegency design by john reedDrivelineWheels,Tires& BrakesFramesRegency ‘Flatside’ Fat Bob Gas TanksA single sheet of seamless, one-piece steel is deep-drawn to form the perfect geometric curved outer panelsof our all-new, 6-gallon flatside Fat Bob gas tanks. Unlike tanks with add-on extensions, these tanks carrymore fuel, and don’t require hours of body work to get the contours just right before painting. Even moreimportant than increased riding range, the greatest benefit of these tanks is their sensational style! Styledafter the classic European gas tanks, you’ll see a big difference as soon as they are bolted on. Over twoinches longer than stock tanks, the bike suddenly looks dramatically longer and lower. A Custom Chrome ®exclusive. (May require modification of stock seat or purchase of aftermarket seat.) Fit Softail ® models from1984 thru 1999, and aftermarket frames with flatside tank mounts.Gas caps must be purchased separately.46185 Requires Late-Style screw bung gas caps (not included). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$260.0946181 Requires aircraft bolt in gas caps (not included). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$306.1946180 Requires aircraft weld-in gas caps (not included). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$308.99 Note: All fuel tanks must be test fitted, pressure tested,and pre-sealed before painting. Tanks shown painted forillustration purpose only.Forks& ShocksSheetmetalGeneralFor the Dealer Nearest You, Call: 800-729-333216.37CrossReference

Two-Piece Gas Tanks & Gas CapsStretched Flatside Fat Bob Tanks for Softail ® ModelsStretched tanks are one of the hottest custom bike trends. We start with our best selling5- and 6-gallon tanks and weld on custom formed steel extensions. The extensions addover two inches to the length of the tank and create a smooth flowing look by filling thevoid between the seat and where the tank normally ends. Manufactured of heavy gaugesteel on new tooling, each tank is hand inspected and pressure tested to ensure quality anda perfect fit. Designed for use with a stock dash, tank panel, late model (13/16" thread)petcock and most standard width seats. Available with bungs for 1982-up screw-in, orCustom Chrome ® aircraft style gas caps. Fit Softail ® models from 1984 thru 1999 and mostframes with mounts for flatside tanks.Gas caps must be purchased separately.15750Screw-Type Bolt-In Aircraft Pre-WeldedTank Capacity Caps Caps Aircraft Caps3.5 gallon 15525 $334.99 n/a n/a4.2 gallon 15746 $279.09 n/a 08801 $310.295.0 gallon 46188 $254.79 15749 $372.19 08802 $310.296.0 gallon 46190 $334.99 15750 $372.19 08803 $310.297.0 gallon 46552 $279.09 08963 $372.19 08804 $353.59Note: Review photos below for cap styles. Stretched portion of tank does not hold fuel. Some wide or touringseats may require modification. Due to the slightly different contour of the 6-gallon and 7-gallon tanks, flexiblesteel, leather or plastic tank panels should be used. All fuel tanks must be test fitted, pressure tested, and presealedbefore painting. Tanks shown painted for illustration purpose only, tanks require finish body work.Gas Tank Sets Sold Without Caps • Caps Available On This Page1982-1991 Screw-In Bolt-In Aircraft Pre-Welded Aircraft08661Sheetmetal16Aircraft-Style Gas Cap SetsLow profile high-tech gas caps. Designed to be used with theaircraft-style tanks on this page.Weld-In Cap KitsKits include weld-in bungs and caps.Locking08673 Gas cap set, vented and non-vented . . . . . . . . . .$132.99Non-Locking08672 Gas cap set, vented and non-vented . . . . . . . . . .$115.9908676 Vented cap kit ONLY . . . . . . . . . . . . . . . . . . . . . . . . . .$58.99Bolt-In Cap KitsKits include mounting rings, gaskets, screws and caps.Locking08663 Gas cap set, vented and non-vented . . . . . . . . . .$121.4908661 Vented cap kit ONLY . . . . . . . . . . . . . . . . . . . . . . . . . .$63.49Non-Locking08662 Gas cap set, vented and non-vented . . . . . . . . . .$101.4916.38Aircraft Caps Available with or without Locksfor Either Bolt-In or Weld-In Applications0880808660 Vented cap kit ONLY . . . . . . . . . . . . . . . . . . . . . . . . . .$52.99 Flatside Gas TanksReplacement Parts08667 Non-vented cap without lock ONLY . . . . . . . . . . . .$30.4908669 Non-vented cap with lock ONLY . . . . . . . . . . . . . . .$39.4908664 Vented cap without lock ONLY . . . . . . . . . . . . . . . .$34.9908668 Vented cap with lock ONLY . . . . . . . . . . . . . . . . . . . .$39.4908682 Vented bolt-in trim ring (sold each) . . . . . . . . . . . .$24.4908670 Non-vented bolt-in trim ring (sold each) . . . . . . .$24.4908666 Bolt-in cap trim ring gasket (pack of 10) . . . . .$0.95 each08677 Chrome mounting screws (pack of 12) . . . . . . .$1.79 each260231 Filler cap set, without lock. Includes ventedand non-vented . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$55.99260233 Filler cap set, with lock. Includes ventedand non-vented . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$61.99Designed to accept 1982-up screw in caps or our new aircraft style flush mount caps.Each tank is formed on all-new tooling to ensure quality. The Aircraft gas caps mount ina recessed bung that keeps the top of the cap flush with the tank surface for a smoothcustom look. Tanks are designed to work with stock and most aftermarket frames withflatside brackets and single large diameter instruments, dashes, trim panels and 13/16"petcocks. Fit Softail ® models from 1984 thru 1999 and most aftermarket frames withmounts for flatside tanks. Gas caps must be purchased separately.Screw-Type Bolt-In Aircraft Pre-WeldedTank Capacity Caps Caps Aircraft Caps3.5 gallon 15297 $229.89 n/a n/a4.2 gallon 46550 $204.79 n/a 08806 $212.295.0 gallon 15298 $183.99 15569 $221.59 08807 $212.296.0 gallon 15294 $229.89 15570 $221.59 08808 $212.297.0 gallon 46551 $204.79 15524 $221.59 08809 $212.29Note: Due to the slightly different contour of the 6-gallon and 7-gallon tanks, flexible steel, leather or plastictank panels should be used. All fuel tanks must be test fitted, pressure tested, and pre-sealed before painting.Tanks shown painted for illustration purpose only, tanks require finish body work.Prices appearing in this catalog are Suggested Retail Price and are subject to change*

Two-Piece Gas TanksApparelBike Kits& TrailersSeats& BagsFootControls1567115603HandControlsLightingElectricalExhaustIntake1567515296EngineStretched Flatside Fat Bob Tanks for Softail ® ModelsTwo-piece tanks feature 2" or 4" stretch with either 4.2 or 5.5 gallon capacitywith flush locking gas caps (included) or for stock-style screw-in caps(not included). Because they are longer-than-stock, tanks require customseats. 2" stretch tanks are new stampings without welded wing extensions,but are also available with welded extensions to create the 4" stretch tanksand a radical custom look. Fit Softail ® models from 1984 thru 1999 andmost aftermarket frames with mounts for flatside tanks.15216 2" stretch, 5.5 gallon with flush locking caps . . . . . . . . . . . . . . . .$383.5415671 2" stretch, 5.5 gallon for stock-style screw-in caps(caps not included) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$339.4415672 2" stretch, 4.2 gallon ‘Slimline’ for stock-style screw-in caps(caps not included) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$317.9915690 4" stretch, 5.5 gallon with flush locking caps . . . . . . . . . . . . . . . .$400.3915675 4" stretch, 5.5 gallon for stock-style screw-in caps(caps not included) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$400.69Note: Fuel tanks, particularly where custom paint is planned, must be pressure-tested, thensealed with tank prep (CC #3991012) and Kreem (CC #3991008) before painting, to protectthe final finish and prevent internal rust during winter storage.Fat Bob Gas TanksTanks are designed with accurate, precision-placed mounting plates andstud bosses. For increased durability, low-temperature welding is usedthroughout the tank. Accepts either the dash for Low Rider ® models or theFat Bob dash for FL and FXWG models. Features late 13/16" external-threadfuel valve connections for Original Equipment style gas valves (CC #’s 25245,25243) or high volume versions like our extensive selection of Pingel ® petcocks.Available to accept either pre-1982 cam-style gas caps or later modelscrew-in style gas caps. The 6-gallon tanks have the classic Fat Bob profile,but are a bit taller and wider. They are shipped with a dash spacer kit toaccommodate the increased height. Fit all Original Equipment and aftermarket4-speed Big Twin frames thru 1984 (except FXST models).Tanks with Cam-Style Bungs15289 3.5 gallon (repl. OEMs 61218-67A, 61426-67A) . . . . . . . . . . . . . .$199.3925549 5.0 gallon (repl. OEMs 61211-67, 61228-67A) . . . . . . . . . . . . . . . .$209.5915603 6.0 gallon . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$245.34Note: Due to the slightly different contour of the 6-gallon tanks, flexible steel, leatheror plastic tank panels should be used.Tanks with Screw-Style Bungs15295 3.5 gallon (repl. OEMs 61219-83, 61425-83) . . . . . . . . . . . . . . . . .$179.9915296 5.0 gallon (repl. OEMs 61213-83, 61229-83) . . . . . . . . . . . . . . . . .$196.9915602 6.0 gallon . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$229.19Note: Due to the slightly different contour of the 6-gallon tanks, flexible steel, leatheror plastic tank panels should be used.Gas Tank Accessories25548 Rubber grommet with a steel insert for use in mounting Fat Bobtanks. Helps to isolate the tanks from vibration. Bag of 10. . . .$13.99GasketsTranny& ClutchDrivelineWheels,Tires& BrakesFramesForks& ShocksSheetmetalGeneralFor the Dealer Nearest You, Call: 800-729-333216.39CrossReference

Two-Piece Gas Tanks15652Fat Bob Gas Tank for FXRModelsClassic Fat Bob look for all FXR models from 1982 thru 1999. It has theappearance of split tanks, but is really a one-piece welded tank with twinscrew-type filler necks, and 13/16" external-thread gas valve fitting. Boltsdirectly to the stock mounts and accepts all FL-style dash assemblies(except Cateye) when the appropriate dash base is used. Included with eachtank is a CC #19095 super-flex speedo cable and a chrome tank ‘divider’panel. The tanks are even equipped with internal emission control systemconnections, for use on vehicles WITH fuel tank emission devices (i.e.,California models).25551 4-gallon Fat Bob gas tank for FXR models . . . . . . . . . . . . . . . . .$271.9425553 Replacement chrome tank panel . . . . . . . . . . . . . . . . . . . . . . . . . .$21.49Note: CC #25551 tanks require removal of solder from vent tube prior to installation onvehicle when connecting fuel tank emissions control devices.Custom Gas Tanks with Locking Flush-MountGas Caps for Big TwinsThese tanks are true to the original look and shape of stock tanks but featurelocking flush-mount gas caps. They bolt-up right, and have all tabs,vents and fuel outlets. For durability, they are low-temperature welded toeliminate brittleness where the tank sections join and tabs are added. Tanksets include flush mount locking caps and two keys.15651 5-gallon ‘flatside’ Fat Bob tanks for all models from 1985thru 1999 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$295.4915652 5-gallon Fat Bob tanks for Big Twin 4-speed framesthru 1984 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$271.7915659 6-gallon ‘flatside’ Fat Bob tanks for all models from 1985thru 1999 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$378.99Sheetmetal16Quickbob Gas Tanks for Dyna Wide Glide ® ModelsChange the look of your bike by using one of the wide range of dashes forFat Bob tanks. When used with the appropriate dash base, you can choosethe classic look of ‘tin’ 2- or 3-light dashes, stock FXDWG dashes or go totallycustom with a Mirage ® cast dash. The possibilities are endless. Both versionshold 4.5 gallons and use either screw-in style or locking flush-mountgas caps. They fit all Dyna Wide Glide ® models from 1993 to present (theydo not permit the use of a fuel gauge), and include the tank, chromemounting hardware, and a chrome tank ‘divider’ panel.15640 Quickbob tank for screw-in style gas caps (not included) . . . .$278.1915662 Quickbob tank for flush-mount gas caps (included) . . . . . . . . .$346.49Note: Fuel tanks, particularly where custom paint is planned, must be pressure-tested, thensealed with tank prep (CC #3991012) and Kreem (CC #3991008) before painting, to protect thefinal finish and prevent internal rust during winter storage.16.40Prices appearing in this catalog are Suggested Retail Price and are subject to change*Fat Bob Gas Tanks with Flush-Mount CapsExclusive Custom Chrome ® design features flush screw-type gas caps with flipuphandles for opening and closing. Crossover lines are braided stainless steelwith banjo bolts at the lower front of each tank for a high-tech look and aleak-proof connection. Tanks are welded using low-temperature techniquesfor a less brittle, more reliable gas tank. Precise mounting system utilizes thickplates and bosses. Available with standard Fat Bob mounts, or late-model‘flatside’ mounting system. Tank sets include right vented and left non-ventedcaps and all required mounting hardware.15600 5-gallon ‘flatside’ tanks for all models from 1985 thru 1999 .$394.9915601 5-gallon standard Fat Bob tanks for Big Twin 4-speedframes thru 1984 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$340.49Replacement Flush-Mount Caps15607 Replacement flush cap set, left and right . . . . . . . . . . . . . . . . . . . .$77.4915615 Flush right cap, vented (sold each) . . . . . . . . . . . . . . . . . . . . . . . . . . .$42.4915616 Flush left cap, non-vented (sold each) . . . . . . . . . . . . . . . . . . . . . . .$42.49

Two-Piece Gas Tanks & AccessoriesApparelFat Bob Gas Tankswith Emblem MountsIdeal for restoration work,these 5 gallon tank sets havefactory installed mountingbrackets for the 1963-1965style Harley-Davidson ® emblems.They accept Low Rider ®dual gauges, or cast dasheswith Fat Bob speedometers andtrim, stock or custom pre-1982 stylecam lock gas caps and have beenupdated to the late model, 13/16" threadpetcock. Designed for Big Twin models through1984 with stock or most custom frames with Fat Bob brackets. . . . . . .$177.49260136 5.0 gallon gas tanksNote: All fuel tanks should be test fitted, pressure tested, and pre-sealed before painting.3.5 Gallon Hand ShiftGas TanksTwo versions of the obsoletehand shift style 3.5 gallon gastank sets. Accurate placementof the shifter gate lugs andshut-off rod hole centersensures trouble-free service.Available in two versions. One is atotally accurate reproduction of theoriginal, rod-style gas shut-off equippedtank used from 1948 thru 1965. The other isbased on the same tank, but eliminates the early stylegas shut-off rod system and replaces it with the tank bottom fitting for thelate 13/16" external-thread petcock. Both tanks accept the correct cam-stylegas caps and are designed to accept the stock shifter guide.25568 Original style with rod shut-off (shown) . . . . . . . . . . . . . . . . . . . . .$244.49Note: Replacement rod style gas shut-off available as CC #25294.25569 Updated style for 1975-up petcock . . . . . . . . . . . . . . . . . . . . . . . . . .$244.49Bike Kits& TrailersSeats& BagsFootControlsHandControlsLightingElectricalExhaustIntakeBob McKay Flatside Tank Mounting BracketDesigned by noted Canadian customizer, Bob McKay. Permits you to mounta set of flatside Fat Bob gas tanks on your Sportster ® model. May need flatsidemounting kit (CC #25550). Sold each. . . . . . . . . . . . . . . . . . . . . . . . . . . .$99.6912000 Fits all Sportster ® models from 1982 thru 1999Note: Must use 2000 thru 2002 coil bracket (CC #09335) which must be purchased separately.Bracket Mount Kit for Flatside Gas Tanks• This patent-pending bracket can be used on any Softail ® framefrom 2000 to present• Allows for an alternative from the standard one-piece tank so thatcustomizing is limitless and fuel capacity can be increased• Any flatside tank is now possible to install on your Softail ® with thisbracket mount• Installation is easy, no welding or modifications are required600125 Fits Softail ® models from 2000 to present . . . . . . . . . . . . . . . . . . .$178.95EngineGasketsTranny& ClutchDriveline86676Early Style Crossover Line for Fat Bob Gas TanksChrome crossover line for Big Twins from 1948thru 1965 (replaces OEM 62355-48) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$19.99260351 Sold eachWheels,Tires& Brakes86665FramesZCB Weld-On Gas Tank ExtensionsRaw steel pre-formed, changes the look of your bike dramatically just bywelding on these two stylish tips without the expense of a new stretchedgas tank.86665 For 3.5 gallon split tanks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$161.7986666 For 5.5 gallon split tanks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$161.7986676 For Twin Cam 88 ® tanks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$171.69Shut-Off Valvesfor Fat Bob TanksAccurate reproduction of the pre-1966 thru-tank gas tank shut-off assembly.Complete assembled unit includes shut-off rod, seat, cap knob and allwashers, seals and hardware. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$39.4925294 Replaces OEM 62033-41Gas Tank Shut-Off Valve Extension KnobAllows easier operation of the shut-off valve. Chrome-plated. . . . . . .$10.9936052 For stock gas tanks 1935 thru 1965Gas Tank Fitting KitFor use with rubber line on original-styleshut-off valves and tanks. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$19.9936051 For stock gas tanks 1935 thru 1965Forks& ShocksSheetmetalGeneralFor the Dealer Nearest You, Call: 800-729-333216.41CrossReference

Gas Tank Mounting Hardware161062500225056‘Flatside’ Tank Mounting KitsNow you can mount late-model OriginalEquipment or CC rubber-mounted ‘flatside’ gastanks on your 1958 thru 1984 FL/FX model, ormany aftermarket custom frames. Available in adeluxe version that’s made in the USA byBadlands, or an imported economy version. Kitsinclude detailed instructions, mounting brackets,and all necessary hardware. Requires minorwelding for installation.16106 Deluxe kit . . . . . . . . . . . . . . . . . . . . . .$75.9526465 Economy kit . . . . . . . . . . . . . . . . . . .$40.99Lower Bolt Kit for Fat Bob TanksThis kit replaces the stock lower front mountinghardware on all motorcycles equipped with twopiece‘flatside’ Fat Bob gas tanks from 1984 thru1990. Kit includes threaded stud, two beveledwashers, and two chrome acorn nuts. . . . .$10.9925001 For 4-speed FX’s from 1985 thru 1986and Softail ® models from 1984 thru 1990Replacement Mountsfor Fat Bob Gas TanksNo more small gas tanks for the guy whotorched off his Original Equipment brackets.Restores original looks and value of 4-speedframes thru 1984. Can be adapted to manycustom frames.25002 Top mounting bracket set . . . . . . . .$27.4925056 Front lower bracket ONLY . . . . . . .$13.99260112 Complete kit (include upper and lowerfront and rear brackets) . . . . . . . . . .$18.99Universal Fat Bob Gas TankQuickmount KitA precise and effortless way to mount OriginalEquipment or aftermarket Fat Bob tanks tocustom or Original Equipment frames that havehad the gas tank brackets removed. It permitsthe builder to temporarily attach the one-piecebracket for a quick visual check of tank placementon custom applications, and once a tankposition is selected, the entire bracket assemblymay be welded in place for a stronger-thanstock,precision system of support. . . . . . . .$55.9925048 Complete kitCustom Hardware Kitfor ‘Flatside’ TanksChrome-plated beveled washers and countersunkmounting screws provide a custom look.They replace the cad-plated Original Equipmentscrews and washers. . . . . . . . . . . . . . . . . . . . . .$16.9925590 Fits all Softail ® models from 1991thru 1999Upper Bracket for Fat Bob TanksThis weld-on, cast iron, front bracket is usedto secure the tanks to the frame. . . . . . . . . .$12.49260152 Drilled and tappedMounting Kit for Fat Bob TanksHardware kit includes bolts, nuts, washers andspacers for mounting Fat Bob ® tanks on 4-speedstyle Big Twin frames through 1984 and mostcustoms. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$7.99260113 Complete kitSheetmetal16Custom Mounting Kitfor ‘Flatside’ TanksA complete kit that can be used to update yourexisting ‘flatside’ tank mounts, or used onnewly-constructed bikes instead of purchasingOriginal Equipment parts. The beveled washersand countersunk mounting screws are chromeplated,and provide a custom look. . . . . . . .$54.3925550 Fits 1984 Softail ® models, and all modelswith split tanks from 1985 thru 1999Mounting Kit for Fat Bob TanksA ‘must’ when installing CC or OriginalEquipment Fat Bob tanks on 4-speed framesthrough 1984. Special washers in kit preventpossible thread damage to rear mounting holesand keep tanks from resting against heads.26446 Complete kit . . . . . . . . . . . . . . . . . . . .$12.49Another ‘must’ for installing Fat Bob tanks. Oneof our mechanics came up with this little item.It’s actually the chain guard mounting grommet,but it works great in the front Fat Bob tankmount holes to isolate the tanks from vibration.25548 Bag of ten . . . . . . . . . . . . . . . . . . . . . . .$13.99Rubber Mounts for ‘Flatside’Gas TanksAccurate reproductions of the Original Equipmentparts used to mount ‘flatside’ gas tanks to4-speed FX models 1985 thru 1986, and Softail ®models from 1984 thru 1999. Pack of 6. . .$12.4925577 Replaces OEMs 11447, 577516.42Prices appearing in this catalog are Suggested Retail Price and are subject to change*

DecalsApparel75140751117510075130Bike Kits& Trailers751327511475127Seats& Bags7513875103751417511675126FootControls751127510475144751207511875124HandControls75122Lighting751427513975143Factory DecalsNow Custom Chrome ® offers the factory decals you need when repainting yourbike or replacing a gas tank. Some of these decals can be used on either side ofthe bike or tank, others come in right and left.75100 ‘Tri-Plane’ black/red . .$19.9975103 ‘Bar & Shield’ . . . . . . . . . .$9.9975104 ‘Round’ red/brown . . .$33.4975111 ‘USA’ silver/black . . . . .$43.9975138 ‘Style’ black/blue . . . . .$30.4975139 ‘Style’ black/pearl . . . . .$28.9975140 ‘FLSTF’ silver/bronze . .$27.6975141 ‘FLSTF’ silver/black . . . .$30.4975142 ‘Stacked’ gold/red . . . .$36.9975143 ‘Stacked’ silver/black . .$36.9975144 ‘Stacked’ black/gold . .$36.9975145 ‘2-Tone’ burgundy . . . .$22.99n/a ‘Belt Drive’75151 ‘H-D’ motor arched . . .$31.9975152 ‘H-D’ silver/black/red . .$30.4975153 ‘H-D’ gold/black/red . .$30.4975154 ‘H-D’ silver/black/blue .$30.4975155 ‘2-Tone’ blue . . . . . . . . .$22.9975156 ‘USA’ black/silver/red .$18.4975159 ‘883 XL’ black/blue . . . .$19.9975160 ‘883 XL’ black/orange .$15.4975161 ‘1200 XL’ black/brown $24.9975162 ‘1200 XL’ black/blue . .$24.9975164 ‘5-Speed XL’ . . . . . . . . .$31.997515975154751527515175155751457516075153discontinuedElectricalExhaustIntakeEngineGaskets75156Right Left Description75101 75102 ‘Winged’ red/black . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$25.9975105 75106 ‘FLHR’ bronze/red . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$30.4975107 75108 ‘FLHR’ Silver/blue . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$28.9975109 75110 ‘FLHR’ grey/red . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$25.9975112 75113 ‘Lean’ blue/turquoise . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$33.4975114 75115 ‘Lean’ black/silver . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$33.4975116 75117 ‘Lean’ black/orange . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$33.4975118 75119 ‘Lean’ black/red . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$33.4975120 75121 ‘Tail’ silver/black . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$33.4975122 75123 ‘Tail’ gold/black . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$33.4975124 75125 ‘Arrow’ red/black/blue . . . . . . . . . . . . . . . . . . . . . . . . . . . .$31.9975126 75128 ‘Arrow’ orange/red/bronze . . . . . . . . . . . . . . . . . . . . . . .$36.4975127 75129 ‘Arrow’ red/burgundy/silver . . . . . . . . . . . . . . . . . . . . . . .$36.4975131 75130 ‘Flame’ red/brown . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$30.4975132 75133 ‘Speed’ red/tan . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$30.4975134 75135 ‘Speed’ blue/grey . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$43.9975136 75137 ‘Speed’ red/brown . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$30.4975146 75147 ‘Fancy’ red/gold/black . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$28.9975148 75149 ‘Eagle’ silver/black . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$27.4975157 75158 ‘XL’ orange script . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$39.49751627510975101751347516475157751467510775161751057514975136Tranny& ClutchDrivelineWheels,Tires& BrakesFramesForks& ShocksSheetmetalGeneralFor the Dealer Nearest You, Call: 800-729-333216.43CrossReference

Emblems7532075306Sheetmetal753097530375312753187530575308753007531475316Gas Tank EmblemsHere‘s the real thing! Original Equipment metal gas tankemblems for Big Twins that not only look like stock and fit likestock, they are stock! Perfect for restoration projects orto add a traditional look to a late model bike.75300 For 1937 thru 1946 (OEM 61769-40T) . . . . . . . . . . . . . . .$49.9975301 Trim rails for CC #75300 (OEM 61798-41T) . . . . . . . . . .$42.4975302 Adapter kit for Fat Bob tanks using CC #75300(OEM 61785-92T) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$22.9975303 1947 thru 1950 (OEM 61769-47T) . . . . . . . . . . . . . . . . . .$49.9975304 Adapter kit for Fat Bob tanks using CC #75303(OEM 61783-92T) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$19.9975305 1951 thru 1954 (OEM 61774-51T) . . . . . . . . . . . . . . . . . .$52.0975306 Trim strips for CC #75305 (OEM 61794-51T) . . . . . . . . .$31.9975307 Adapter kit for Fat Bob tanks using CC #75305(OEM 61784-92T) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$19.2975308 1957 (OEM 61773-57T) . . . . . . . . . . . . . . . . . . . . . . . . . . . .$43.9975309 1958 (OEM 61773-58T) . . . . . . . . . . . . . . . . . . . . . . . . . . . .$43.9975310 Flat adapter kit for CC #’s 75308 and 75309(OEM 61780-91T) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$18.4975311 Curved adapter kit for CC #’s 75308 and 75309(OEM 61781-91T) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$18.4975312 1959 thru 1960 FL models (OEM 61775-59T) . . . . . . . .$51.4975313 Adapter kit for Fat Bob tanks using CC #75312(OEM 61742-93T) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$21.4975314 1961 thru 1962 FL models (OEM 61776-61T) . . . . . . . .$77.6975315 Adapter kit for Fat Bob tanks using CC #75314(OEM 61740-90T) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$33.4975316 1963 thru 1965 FL and XL models(OEM 61777-63T) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$42.8975317 Adapter kit for Fat Bob tanks using CC #75316(OEM 61782-91T) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$19.9975318 1966 thru 1971 FL and XL models, 1971 FX models(OEM 61771-66TB) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$45.4975319 Adapter kit for Fat Bob tanks using CC #75318(OEM 61741-93TB) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$22.4975320 1979 thru 1980 FL models and 1980 FLT models(OEM 61253-79TA) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$34.991616.44Prices appearing in this catalog are Suggested Retail Price and are subject to change*

Flush Mount & Pop Up Gas CapsApparelBike Kits& TrailersSeats& Bags60265FootControls60264Custom Flush Mount Gas Cap KitsGas cap kits are designed with bolt-in or weld-inbungs that come with a "bondo rim." A low rimthat surrounds the opening providing a convenientstopping place for the body work fillers orlead. Gas caps are available in 3" or 21/4"-diametersand either vented or non-vented. Choice ofsteel or aluminum weld-in bungs. Sold each.Steel Weld-In Style60265 3"-diameter, vented . . . . . . . . . . . . .$148.0060266 3"-diameter, non-vented . . . . . . . . .$148.00Aluminum Weld-In Style60267 21/4"-diameter, vented . . . . . . . . . . .$140.0060268 21/4"-diameter, non-vented . . . . . .$140.0060269 21/4"-diameter, vented with lock .$164.0060270 21/4"-diameter, non-ventedwith lock . . . . . . . . . . . . . . . . . . . . . . . .$164.0060271 3"-diameter, vented . . . . . . . . . . . . .$148.0060272 3"-diameter, non-vented . . . . . . . . .$148.00Bolt-In Style60273 21/4"-diameter, vented . . . . . . . . . . .$148.0060274 21/4"-diameter, non-vented . . . . . .$148.0060275 21/4"-diameter, vented with lock .$155.0060276 21/4"-diameter, non-ventedwith lock . . . . . . . . . . . . . . . . . . . . . . . .$155.0060277 3"-diameter, vented . . . . . . . . . . . . .$152.0060278 3"-diameter, non-vented . . . . . . . . .$152.00Gas Cap ONLYReplacement gas caps. Sold each.60279 21/4"-diameter, vented . . . . . . . . . . .$106.5060280 21/4"-diameter, non-vented . . . . . .$106.5060281 21/4"-diameter, vented with lock .$117.5060282 21/4"-diameter, non-ventedwith lock . . . . . . . . . . . . . . . . . . . . . . . .$117.5060283 3"-diameter, vented . . . . . . . . . . . . .$112.0060284 3"-diameter, non-vented . . . . . . . . .$112.00260424Pop Up FlushMount Gas Capsby TolleA slick, original design fromSweden, that is taking the bike-building world bystorm! Highly polished stainless steel construction.To operate, place fingers on center of cap, rotatecap 1/4 turn, and spring loaded center pops-up.Turning the center then unscrews the entireassembly. After screwing cap back in, pushingdown center section and rotating it 1/4 turnreturns the center to the flush position. . .$171.93260424 Vented pop up gas cap for right side onlate 1996-up models260425 Non-vented pop up gas cap for left sideon late 1996-up models(except models with gas gauge cap)Note: Tolle flush mount caps will fit 1982-1995 tanks, but will notfit flush on the outer edge. 1982-1995 tanks have a raised ridgearound the filler neck that 1996-up tanks don't have.HandControlsLightingElectricalExhaustIntakeEngine47716Gaskets47715Tranny& Clutch48266260252Flush Mount GasCaps by KüryAkyn ®These slick, flush mount gas caps have the hightechlook of aviation-style fuel fillers. The builtin trim ring protects the painted surface aroundthe filler opening from dings and gas stains. Akeyed entry system permits their ultra thin profileand prevents tampering. Installationrequires no cutting and the “key” is included.Stock gaskets must be reused on models fromlate 1996 to present.48266 Vented, for right-side tanks . . . . . . . .$49.9948267 Non-vented, for left-side tanks . . . . . .$49.99260252 Replacement key . . . . . . . . . . . . . . . . . . .$5.39Small Flush Mount Filler Necksand Gas Cap KitsThese filler necks and caps have an O.D. of only80mm. They are available with 50mm I.D. ineither vented or non-vented versions for splitgas tanks. Replacement bolts and fixing ringsare also available. Sold each.84739 Vented . . . . . . . . . . . . . . . . . . . . . . . . .$204.0984740 Non-vented . . . . . . . . . . . . . . . . . . . .$174.9984741 Replacement fixing ring kit . . . . . .$28.3947779Custom Pop-Up Gas Caps• Vented gas caps that don’t protrude from thesurface of the gas tank at all!• To access the filler, you press and twist... thecap pops up, then unscrews normally• For custom “weld-in” applications ONLY• Sold each47715 Stainless steel bung and cap . . . . . .$110.6947716 Aluminum bung and cap . . . . . . . . .$104.6947779 Stainless steel bung and chrome cap .$113.89Replacement Pop-Up Caps ONLY47775 Stainless steel . . . . . . . . . . . . . . . . . . . . .$52.9947777 Chrome . . . . . . . . . . . . . . . . . . . . . . . . . . .$51.49DrivelineWheels,Tires& BrakesFramesForks& ShocksSheetmetalGeneralFor the Dealer Nearest You, Call: 800-729-333216.45CrossReference

Chrome Gas CapsPeakedFlamedBaby MoonLouveredGroovedSkullRoundaboutButton HeadNess-Tech ® 'Radius' Gas CapsChrome-plated aluminum screw-in caps with alow-profile design that measures only 3/8"-tall.The exclusive ratcheting feature provides propertorque. The vented gas caps have right-handthreads, and the non-vented caps have left-handthreads. A dummy gas cap is available to replacethe fuel gauge gas caps found on some latemodel Big Twins. Sold each. . . . . . . . . . . . . . .$49.95Vented05422 Fits models from late 1996 to present05420 Fits models from 1982-early 1996Non-Vented05423 Fits models from late 1996 to present05421 Fits models from 1982-early 1996Dummy Cap05424 Replaces fuel gauge for symmetrical lookSheetmetal16Ness-Tech ® ‘Low Gravity’ Screw-in Gas CapsThis low profile, between 1/4" and 3/8"-tall, chrome-plated billet aluminum design stands out in style!Ratcheting mechanism provides proper torque and alignment. Vented gas caps have a right-handthread, and non-vented caps have a left-hand thread. Sold each. . . . . . . . . . . . . . . . . . . . . . .$44.95 to $59.95Fit all Models from 1982-Early 1996Vented Non-Vented05185 05186 Peaked05187 05188 Baby Moon05189 05190 Louvered05191 05192 Grooved05193 05194 Flamed05551 05552 Skull05553 05554 Roundabout05555 05556 ButtonheadChrome-Plated Steel Gas CapsPerfect mechanical reproductions of the OriginalEquipment parts. The low-pressure relief vent isproperly recessed in the cap to clear the fillerneck vent tube. For screw-style tanks from 1982to present.26580 Set of left and right caps . . . . . . . . . .$27.4926582 Right side cap only (vented)replaces OEM 61102-83A . . . . . . . . .$15.4926581 Left side cap only (non-vented)replaces OEM 61103-83 . . . . . . . . . . .$13.99Fit all Models from Late 1996 to PresentVented Non-Vented05726 05727 Peaked05728 05729 Baby Moon05730 05731 Louvered05732 05733 Grooved05734 05735 Flamed05736 05737 Skull05738 05739 Roundabout05740 05741 ButtonheadMini Bolt-In Gas Caps with LocksChrome-plated gas caps are availableindividually or in sets. All come with assemblylocks and are compatible with gas tanks thataccept an 3.74" outer diameter x 2.46" innerdiameter aircraft-style cap. Sold each.15786 Gas cap set . . . . . . . . . . . . . . . . . . . . . .$117.9915784 Right side gas cap (vented) . . . . . . $60.9915785 Left side gas cap (non-vented) . . . $58.99260023Screw-in Gas Capswith Aircraft LookNow you can enjoy the high-tech aircraft caplook without the hassle of re-working yourexisting tanks. These screw-in gas caps arechrome plated, solid billet aluminum and haveactual countersunk stainless Allen head fastenersaround the outside edge. Center lever raisesand lowers just like other aircraft caps, exceptturning it removes the entire cap, not just thecenter plug. No modification required, fits 1983-up (except FLT and fuel gauge cap).Caps are non-locking.260023 Gas cap set. Includes one ventedand one non-vented . . . . . . . . . . .$66.49260022 Vented (right side,right hand threads) . . . . . . . . . . .$36.49260021 Non-vented (left side,left hand threads) . . . . . . . . . . . . .$28.9916.46Prices appearing in this catalog are Suggested Retail Price and are subject to change*

Gas CapsApparel260032Bike Kits& Trailers‘Renegade’Seats& Bags‘Bandit’FootControlsDeluxe Scalloped Gas CapsChrome deluxe gas caps with scalloped edges.Available vented or non-vented for most BigTwin and Sportster ® models from 1941-early1973. Also fits most after-market replacementgas tanks.260030 Vented . . . . . . . . . . . . . . . . . . . . . . .$15.49260031 Non-Vented . . . . . . . . . . . . . . . . . . .$15.49260032 Deluxe gas cap set (one ventedand one non-vented cap) . . . . . .$28.99261008Stainless Steel Gas Cap Sets withPaint Protectors by LandmarkNever chip or scratch your paint again. Durablealloy paint protector screws into the stock fillerneck offering a permanent air tight seal. Thepolished stainless gas cap threads into the protector.Fit all models with screw-top tanks.HandControlsLightingElectrical261009For Models from Late 1996 to Present‘Bandit’ ‘Renegade’16502 16504 Matched cap set with left andright-hand threads . . . .$109.1916503 16505 Single vented cap . . . . . .$56.29ExhaustNote: In mid-1996 the OEM tank design changed. The gastank bung on these later models DOES NOT have any weldingbead above the sheet metal surface of the tank.For Models from 1982-Early 1996‘Bandit’ ‘Renegade’16491 16493 Matched cap set with left andright-hand threads . . . .$109.1916492 16494 Single vented cap . . . . . .$56.29IntakeEngine261005GasketsChrome Gas CapsChrome-finished, plastic-bodied, nylon thread,screw-type gas caps. Fit models 1982 thru 1995,with correct pressure relief valve and ratchet‘overrun’ design to prevent over tightening.26576 Matched cap set . . . . . . . . . . . . . . . . .$21.4926577 Right side cap only (vented)replaces OEM 61102-83A.Also fits single cap models . . . . . . . .$13.9926578 Left side cap only (non-vented)replaces OEM 61103-83 . . . . . . . . . .$12.49Aircraft Style Fuel Capsby GoodridgeAluminum gas caps available in locking andnon-locking versions. Mounting hardware andflange gasket included.Non-Locking261005 11/2" polished . . . . . . . . . . . . . . . . . .$161.49261008 3" polished, 43/4" overall width .$175.99Locking261009 3" polished, 43/4" overall width .$182.4915850Tranny& ClutchDrivelineWheels,Tires& Brakes15851FramesScrew-In Stainless Steel Gas Capsfor Models from 1983 to Present“Screw-In” gas caps for Big Twin and Sportster ® models1983-up (except FLT and fuel gauge cap).260077 Vented (right side - right hand threads).Replaces OEM 61102-83A . . . . . . .$18.49260078 Non-vented (left side - left hand threads).Replaces OEM 61103-83 . . . . . . . .$16.99260073 Gas cap set. Includes one ventedand one non-vented cap . . . . . . . .$32.99260077Low Profile Stainless SteelGas Cap SetsThese polished gas caps feature an extremelylow-profile with either a peaked or domed topdesign. They fit all models with screw-type gastanks from late 1996 to present. Sold in matchedsets with left and right hand threads. . . . .$39.9915850 Peaked set15851 Domed setForks& ShocksSheetmetalGeneralFor the Dealer Nearest You, Call: 800-729-333216.47CrossReference

Stainless Steel & Mini Gas CapsSeries 2Series 4Series 3RenegadeSeries 1Sheetmetal1616.48BanditPolished Stainless Steel Gas Caps by LandmarkMade from aircraft-grade billet stainless steel, not aluminum! Aftermachining, they’re polished to afinish that rivals chrome for brightness. ‘Series 3’ caps include a pocket spanner to tighten or removethe gas cap which helps defeat gas cap thieves. Single vented caps are available as wellas sets for Fat Bob gas tanks.For Models from 1982-Early 1996Series 2 Series 3 Series 4Style Cap Set Cap Set Cap Set$101.14 $90.74 $90.74Bandit 16404 16408 16442Renegade 16406 16410 16444For Models from Late 1996 to PresentDesigned to fit the revised screw-type gas tank bung introduced in mid-1996 on all models.Series 1 Series 3 Series 4Style Cap Set Cap Set Cap Set$101.14 $90.74 $90.74Bandit 16510 16514 16518Renegade n/a 16516 16520Fuel Gauge Replacement CapMatches ‘Bandit’ and ‘Renegade’ Series 1 gas caps. For models that came stock with left side fuelgauges. Sold each.16508 Bandit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$99.9916509 Renegade . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$99.99Replacement Pocket SpannerFor tightening and removing ‘Series 3’gas caps.16501 Sold each . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$4.89PointedDomedStainless Steel Slim Gas Caps“Slim” gas caps provide a super-low profile andare made of premium quality stainless steel.Each cap is polished to mirror finish that willresist corrosion, rust and oxidation better thanstandard chrome plated steel caps. Knurlededges for improved grip. Fits Big Twins andSportster ® models 1983 to present (except FLT).Pointed Gas Caps260420 Gas cap set. Includes one ventedand one non-vented . . . . . . . . .$103.99Domed Gas Caps260422 Gas cap set. Includes one ventedand one non-vented . . . . . . . . .$103.99260423 Vented gas cap . . . . . . . . . . . . . . .$52.99‘World’s Smallest Gas Cap’by Paul Yaffe OriginalsOriginally designed for the ‘Zombie’ tank, butnow it can be used in all kinds of custom applications.This tiny cap features double VitonO-ring seals and is incredibly leak-resistant. Itssmall diameter won’t disturb the lines of yourcustom tank. Welding required. . . . . . . . . .$118.99600076 Sold eachPrices appearing in this catalog are Suggested Retail Price and are subject to change*‘Inferno ’ Mini Gas CapsSmall 21/2"-diameter and three dimensionalflame design look great on any bike. Add any ofthe broad range of matching ‘Inferno ’ accessoriesand create a completely coordinated look.Chrome-plated die-cast construction with aratcheting mechanism that prevents over tightening.Fit all Original Equipment gas tanks from1982 thru 1995 and most aftermarket gas tanks.27485 Matched cap set, left and right handthread . . . . . . . . . . . . . . . . . . . . . . . . . . .$54.4927483 Vented cap (sold each) . . . . . . . . . . .$28.9927484 Non-vented cap (sold each) . . . . . . .$28.99‘Mirage ® ’ Mini Gas CapsCustom Chrome ® design looks great on any bike.Small 21/2"-diameter caps have a ratchetingmechanism that prevents over-tightening. Thedurable chrome-plated die-cast caps feature ourthree dimensional design that complements ourcomplete line of ‘Mirage ® ’ accessories. Fit allscrew-type gas tanks from 1982 thru 1995.27151 Set of left and right caps . . . . . . . . .$51.4927149 Vented cap (sold each) . . . . . . . . . . .$28.9927150 Non-vented cap (sold each) . . . . . . .$27.49Custom Mini Gas CapsDesigned exclusively for Custom Chrome ® featuringchrome-plated, die-cast top covers, threadedplastic bodies, and a ratchet ‘overrun’ design toprevent over tightening. The vented cap has apressure relief valve properly recessed in the capto clear the filler neck tube. For all models withscrew-type gas tanks 1982 thru 1995.18462 Matched cap set, left and right handthread . . . . . . . . . . . . . . . . . . . . . . . . . . .$49.99

Gas Caps‘Live To Ride’ Gas CapsBeautifully-plated steel caps with chrome or gold-accented Eaglescarrying a banner which says ‘Eagle Spirit’. Fit all models withscrew-style gas tanks 1982 to present.Matched cap set, left and righthand thread18944 Chrome . . . . . . . .$45.8918947 Gold . . . . . . . . . . .$52.99Right side cap only (vented)replaces OEM 61102-83A.Also fits single cap tanks.18945 Chrome . . . . . . . .$29.0918948 Gold . . . . . . . . . . .$32.84Left side cap only (non-vented)replaces OEM 61103-83.18949 Gold . . . . . . . . . . .$32.84ApparelBike Kits& TrailersSeats& BagsFootControlsHandControlsLighting260005ElectricalLate-StyleExhaust22029 22030Regency Gas CapsMatches the complete Regency family ofaccessories. Chrome screw-in style gas caps havea ratcheting mechanism that prevents overtightening.Fit all models from 1982 to present.22028 Gas cap set . . . . . . . . . . . . . . . . . . . . . .$51.6922029 Left hand gas cap (non-vented) . .$25.9922030 Right hand gas cap (vented) . . . . .$25.99Original-StyleCam-Style Gas CapsA variety of replacement and custom gas caps.Available vented for single cap gas tanks andthe right side of Fat Bob gas tanks, or without avent for the left side of Fat Bob tanks. They fitOriginal Equipment and replacement tanks withcam-style bungs.Polished Stainless Steel Late-Style CapsIncludes left and right caps for Fat Bob tanks.26574 Plain cap set . . . . . . . . . . . . . . . . . . .$22.9926570 Vented cap ONLY(repl. OEM 61102-73) . . . . . . . . . . .$15.4926571 Non-vented cap ONLY(repl. OEM 61103-73A) . . . . . . . . .$15.49Chrome Original-Style Gas CapsIncludes left and right caps for Fat Bob tanks.26499 Plain cap set . . . . . . . . . . . . . . . . . . .$10.9912725 Plain vented cap ONLY(repl. OEM 61103-36) . . . . . . . . . . . .$9.5926021 Plain non-vented cap ONLY(repl. OEM 61103-65) . . . . . . . . . . . .$6.49Late-Style Gas Capsfor Late 1973-1982Chrome gas caps for Big Twin and Sportster ®models from late 1973 thru 1982 (except FLTand FXR models).260003 Vented (repl. OEM 61102-73) . . . . .$16.99260005 Gas cap set. Includes one vented andone non-vented (repl. OEMs 61102-73and 61103-73A) . . . . . . . . . . . . . . . . .$16.99IntakeEngineGasketsTranny& ClutchDrivelineAce Metal Stylized Gas CapsA new line of stylized accessories. Jewelry gradeconchos decorate these billet aluminum parts.Iron Cross and 8 Ball are glossy, baked ceramicon a heavy metal base. 3-D Skull is a polishednickel casting with a dark background. Handmadein the USA. Iron Cross versions are notavailable in Europe. Sold each. . . . . . . . . . . .$70.69For Models from Late 1996 to PresentVented Non-Vented06059 06062 3-D Skull06061 06064 8-Ball06060 06063 Iron CrossFor Models from 1982-Early 1996Vented Non-Vented06053 06056 3-D Skull06055 06058 8-Ball06054 06057 Iron CrossPolished Aluminum SkullGas Cap CoverMultiple skull design cast from an original handcarvedmold . Attaches to OEM style gas capswith epoxy (not included). . . . . . . . . . . . . . . .$21.2937735 Sold eachBillet Gas Cap CoverA chrome-plated billet aluminum gas cap coverwith a built-in quartz analog clock with goldtonetrim. It attaches securely with set screws toany of the late-model gas caps (except plasticcaps) used from 1973 thru 1995. Clock has areplaceable battery, and is not water-resistant,but is easily removed for washing or duringinclement weather. Sold each.37322 Gas cap cover . . . . . . . . . . . . . . . . . .$59.9937321 Replacement quartz clock . . . . . .$15.99Wheels,Tires& BrakesFramesForks& ShocksSheetmetalGeneralFor the Dealer Nearest You, Call: 800-729-333216.49CrossReference

Gas Cap CoversPaintSaver ‘Plus’ Filler Neck ProtectorsMade by Carlini Design for late 1996-up gas tanks that won’t accept the original model.The polished stainless ring installs with silicone adhesive. Protects paint from chipping anddamage from fuel and fuel vapors getting under the paint. Sold each.15582 Fits models from late 1996 to present . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$26.69Note: In mid-1996 the OEM tank design changed. The gas tank bung on these later models DOES NOT have anywelding bead above the sheet metal surface of the tank.Original PaintSaver ‘Plus’Incorporates a nitrile rubber seal that is permanently vulcanized to the bottom of a thickpolished stainless steel beauty ring. Sold each.25582 Fits screw-top gas tanks on most models from 1982-early 1996 . . . . . . . . . . . . . . . . .$26.6925583 Matching fuel gauge beauty ring for models with tank-mounted fuel gauge . . .$26.6925589 Fits cam-style fuel tanks used before 1982 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$26.69Krommett Custom Cap CoversSold each. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$10.9912730 For all models thru 197619356 For all models from 1977 thru 1983(except screw-type caps)3-Dimensional Gas Cap CoversDistinctive covers are sand-cast from handcarvedoriginals. Designed to fit over OEM stylecaps. Glue them on with 5-minute epoxy, or usesilicone adhesive. Sold each.37863 Skull . . . . . . . . . . . . . . . . . . . . . . . . . . . .$36.1437868 Flame . . . . . . . . . . . . . . . . . . . . . . . . . . .$26.24Knurled Gas Cap CoverAn easy alternative for those who want a customlook without a custom price. Simple installationtakes only minutes thanks to recessed set screwsand supplied adhesive. Designed for use with1973-up stock gas caps. Sold each.260064 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$17.88Sheetmetal1616.501903719006‘Live To Ride’ Gas Cap CoversCovers with chrome eagles feature a ‘A Way ofLife’ banner. Gold eagles have ‘Eagle Spirit’ banners.They attach with double-sided foam tapeand fit all late model gas caps 1973 to present(except molded plastic caps).‘A Way of Life’19006 Chrome eagle (sold each) . . . . . . .$12.49‘Eagle Spirit’19037 Gold eagle (sold in pairs) . . . . . . .$33.49‘Teardrop and Allen’Gas Cap CoverFeatures non-functional stainless steel buttonheadrivets and teardrop indentations in the varioussurfaces. Each of the die-cast parts is perfectlychrome-plated and comes complete with all necessarymounting hardware. Fits over the late-modelcam-style and threaded gas caps (except moldedplastic) used since 1973. . . . . . . . . . . . . . . . . . . .$27.4937265 Sold eachPrices appearing in this catalog are Suggested Retail Price and are subject to change*Faceted Gas Cap and Fuel GaugeWindow CoverGas cap cover slip-on cover for the left-hand sidewith a cut-out for the fuel gauge. Chrome-platedABS plastic. Fit FXR, Dyna Glide and Road King ®models from 1988 thru 1995.26778 Fuel gauge cover with cut-outONLY (sold each) . . . . . . . . . . . . . . . .$14.99

Gas Tank Fuel FiltersApparel19478Bike Kits& TrailersSeats& Bags194741948019479Chrome Fuel FilterSmall size, but packs big protection for yourmotor. Easily cleaned, reusable screen.18255 For 5/16" fuel line . . . . . . . . . . . . . .$10.9918256 For 1/4" fuel line . . . . . . . . . . . . . . .$10.99FootControlsHandControlsGas Cap GasketsQuality replacement rubber gaskets that fit Original Equipment and aftermarket gas caps.Sold in packs of 10.19474 For threaded style gas caps on all models from 1982 to present (repl. OEM 61109-85C) . . .$24.4919478 3.5 or 5.0 gallon 1941 thru 1982 right side and all 1958 thru 1982 single tanks(repl. OEM 61111-77) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$7.9919479 3.5 and 5.0 gallon right side tanks from 1936 thru 1976 (repl. OEM 61114-48) . . . . . . . . . . . . .$5.7919480 3.5 and 5.0 gallon left side tanks from 1965 thru 1982 (repl. OEM 61116-65) . . . . . . . . . . . . .$10.9915093See-Flow Glass Fuel FiltersA custom in-line fuel filter for 1/4" or 5/16" line.18240 Complete filter for 1/4" line . . . .$10.9918239 Complete filter for 5/16" line . . .$10.9918241 Replacement element . . . . . . . . . . .$7.68LightingElectricalExhaustIntakeEngine19882K&N ‘Nylon’ Inline Fuel FiltersFit 1/4" fuel line.19882 Large (card of 12) . . . . . . . . . . .$4.99 ea15093 Small (card of 12) . . . . . . . . . . .$4.99 ea1826118263GasketsTranny& ClutchDrivelineRussell Universal Fuel FilterUnique design permits you to fit one filter toeither 1/4", 5/16" or 3/8" fuel lines, or mix inletand outlet sizes. Each filter comes complete withsix adapter fittings.18273 Standard 3" filter . . . . . . . . . . . . . .$14.3918241 Replacement elementfor CC #18273 . . . . . . . . . . . . . . . . . . .$7.68Chrome Pingel ® Fuel FilterAluminum bodied filter flows more gas thanthe competition. Made to be used with Pingel ®valves. Approximately 11/8" long. Made in U.S.A.Sold each . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$31.9926603 Fits 5/16" I.D. fuel line18260Russell Fuel FiltersAnodized in-line fuel filters are available for 1/4"or 5/16" fuel line. Utilizes a threaded two-piecedesign so the porous metal fiber filter elementmay be replaced. . . . . . . . . . . . . . . . . . . . . . . . . .$11.951/4" 5/16"18245 18260 Red Filter18246 18261 Blue Filter18247 18262 Black Filter18248 18263 Chrome Filter18262Replacement Filter ElementA replacement element for use in the abovefuel filters. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$5.6918249 Sold eachWheels,Tires& BrakesFramesForks& ShocksSheetmetalGeneralFor the Dealer Nearest You, Call: 800-729-333216.51CrossReference

Pingel ® PetcocksThese drawings are top views of the valves illustrating the positions of the levers and the nipples in left-side installationsPingel ® Power-Flo High Volume PetcockFeatures a brass body with show quality chrome-plating or highly-polished aluminum stainless steel internal components and permanent stainless steel filterscreen. These petcocks offer the highest fuel flow available of any aftermarket fuel valve. Available to fit gas tanks from 1975 and later with 22mm tankbung, or machine-cut 3/8" NPT threads that fit stock gas tanks thru 1974 as well as most aftermarket gas tanks. Dual outlet petcocks can be used with dualcarb setups or one outlet can feed the carb and the other can function as a feed in Nitrous Oxide System application. Made in the USA. Patented.Reserve Petcocks with 22mm Threads 1975 and LaterAll the features of 3/8" NPT reserve petcocks, but specifically designed to fit1975 and later tanks with 22mm tank bung. No adapter required. Petcockshave the the adapter nut installed for you. No additional sealants required.Chrome Polished26835 26839 Single outlet (illustration ‘A’) . . . . . . . . . . . . . . .$74.00 to $81.7527085 27087 Single outlet (illustration ‘G’) . . . . . . . . . . . . . .$74.00 to $81.7527086 27088 Single outlet with nipple down (illus. ‘H’) . . .$83.95 to $91.6526838 26842 Dual outlet (illustration ‘D’) . . . . . . . . . . . . . . . .$84.10 to $91.05266152708627085Replacement Mounting Nut26843 For use with 22mm threaded petcocks only . . . . . . . . . . . . . . . . . .$13.99Reserve Petcocks with 3/8"-NPT Threads Pre 1975Primarily for use on street bikes. The reserve position provides comparablereserve fuel amount to the OEM and other aftermarket petcocks.Chrome Polished26700 26600 Single outlet (illustration ‘A’) . . . . . . . . . . . . . . .$64.60 to $72.3027089 27091 Single outlet (illustration ‘G’) . . . . . . . . . . . . . . .$64.60 to $72.3027090 27092 Single outlet with nipple down (illus. ‘H’) . . .$74.50 to $82.2526615 26612 Dual outlet (illustration ‘D’) . . . . . . . . . . . . . . . .$75.65 to $82.60Adapter NutPermits installation of 3/8"-NPT petcocks on OEM and aftermarketgas tanks with 7/8" or 22mm tank bungs. . . . . . . . . . . . . . . . . . . . . . . . . . . . .$13.9926602 Chrome-plated brassRebuild Kits for Reserve PetcocksComplete rebuild kit for single or dual outlet reserve valves. Includes necessarytools, photos, instructions and parts for three fuel valves. A 51/2" benchvise is required.26718 Complete kit with tools and components for 3 valves . . . . . . . . .$50.9926719 Components only with parts to rebuild 5 valves . . . . . . . . . . . . . .$68.99Sheetmetal1626704 26703Pingel ® ‘Guzzler ® ’ PetcocksMachined from aluminum, they can be used with gasolineand methanol. Features stainless steel internal components and springloadedball detents for positive on/off positioning. Available with a 3/8"hose barb or dual 5/16" barbs. Fits 3/8" NPT thread tank bungs as usedon stock gas tanks thru 1974 as well as many aftermarket tanks. On dualoutlet version, one outlet can feed the carburetor and the other canfunction as a feed in Nitrous Oxide systems. Made in the U.S.A.Note: These petcocks make no provision for fuel reserve.26703 With 3/8" hose barb . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$91.0026704 With dual 5/16" hose barbs . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$105.0016.52Prices appearing in this catalog are Suggested Retail Price and are subject to change*

2662226621266202662726623Pingel ® PetcocksPingel ® Power-Flo ‘Designer’High-Volume PetcocksSame as the standard Pingel ® petcocks, exceptwith brass show chrome plated ‘Designer’ bodies.Designed for 22mm tank bungs used on gas tanks1975 and later. Same maximum flow rate to keepfuel at the carb where the fuel is needed. Samecomparable reserve fuel amounts as OEM and otheraftermarket petcocks. Made in the U.S.A. Patented.26620 Round ‘Wave’ . . . . . . . . . . . . . . . . . . . . .$81.7526621 Hex ‘Wave’ . . . . . . . . . . . . . . . . . . . . . . .$81.7526622 Round ‘Finned’ . . . . . . . . . . . . . . . . . . .$81.7526623 Hex ‘Finned’ . . . . . . . . . . . . . . . . . . . . . .$81.7526625 Hex with AN6 fitting for custombraided fuel lines . . . . . . . . . . . . . . . .$104.9526626 'Guzzler' . . . . . . . . . . . . . . . . . . . . . . . . . .$99.9026627 Hexed Oval . . . . . . . . . . . . . . . . . . . . . . .$81.7526628 Brass AN6 fitting for S&S super Eand G carburetors when usingCC #26625 AN6 petcock . . . . . . . . . . .$22.95ApparelBike Kits& TrailersSeats& BagsFootControlsHandControlsLightingGroovedSmoothDiamondLightningFlamedPingel ® Power-Flo ‘Designer’High-Volume PetcocksSame as the standard Pingel ® petcocks, except with brasschrome-plated ‘Designer’ bodies. Designed for the 22mmtanks bungs used on gas tanks since 1975 and later. Samemaximum flow rate to keep fuel at the carb where the fuelamounts as OEM and other aftermarket petcocks.Made in the USA. Patented . . . . . . . . . . . . . . . . .$81.75 to $83.75Style ‘Illus. A’ ‘Illus. F’ ‘Illus. G’Smooth 27070 27075 27080Grooved 27071 27076 27081Lightning 27072 27077 27082Diamond 27073 27078 27083Flamed 27074 27079 27084Replacement Mounting Nut26843 For use with these petcocks ONLY . . . . . . . . . . .$13.99Rebuild Kits for Reserve ValvesComplete rebuild kit is for single outlet Power-Flo petcocks. Includes necessary tools, photos, instructions andparts for three fuel valves. Component kit includes necessaryparts to rebuild five valves, tools are NOT included.A 61/2" bench vise is required.26718 Complete kit with tools and componentsfor 3 Pingel petcocks . . . . . . . . . . . . . . . . . . . . . . . .$50.9926719 Components only with parts to rebuild5 Pingel petcocks . . . . . . . . . . . . . . . . . . . . . . . . . . .$68.99Note: Rebuild kits will not work on nipple down or dual outlet valves.ElectricalExhaustIntakeEngineGasketsTranny& ClutchDrivelineWheels,Tires& BrakesFramesVacuum Petcock By-Pass KitBy-pass the Original Equipment vacuum operatedpetcock. Easy to install. Fits most Big Twin andSportster ® models from 1998 to present(except fuel injected models). . . . . . . . . . . . . .$19.9925257 Complete kitForks& ShocksSheetmetalGeneralFor the Dealer Nearest You, Call: 800-729-333216.53CrossReference

Petcocks25242252532524125246 25252Chrome Replacement PetcocksChrome-plated duplicates of the stock gas valves used from 1975to present. Available in three different outlet tube options,straight down, left-hand or right-hand for applications at thefront, rear, or either side of the gas tanks. Complete with achromed 13/16" nut and nylon mesh filter screen.25246 Straight down spigot (repl. OEM 62129-75T) . . . . . .$22.9925252 Left-side spigot . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$22.9925253 Right-side spigot . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$22.9925241 Short replacement filter screen . . . . . . . . . . . . . . . . . . . .$4.1925242 OEM replacement filter screen with reserve tube(repl. OEM 62166-81) . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$4.1912731 Replacement 3-hole Viton ® seal (fits latest designwith .260" fuel tubes) . . . . . . . . . . . . . . . . . . . . . . . . . . . .$12.49Chrome PetcocksThese replacement petcocks are designed to provide maximum flow.Includes filtering screen, reserve tube, and chrome plated body.Replacement Filter Screens260373 Fits OEM pre-1975 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$4.19252432705027051127261272725245Sheetmetal16Chrome PetcocksEngineered and designed to eliminate all internal O-rings. The innercore design insuresagainst gas leakage while providing maximum flow. Features a filter screen, reserve setting,and chrome body.12726 Fits OEM and custom tanks thru 1974 with internal 3/8" NPT connection(repl. OEM 62125-55B) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$16.9912727 Same fit as CC #12726 but with 90° barb . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$16.9925245 Fits OEM and custom tanks 1975 thru 1982 with external 13/16" nut connection(repl. OEM 62163-75) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$19.3425243 Same fit as CC #25245 but with 90° barb . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$19.3429103LifetimeWarranty2910529104EMS Ultra-Flo PetcocksDelivers the highest volume flow rate onthe market. Top-quality construction. Allexternal parts are forged brass (billet) andreceive a triple-plate, show chrome finish.They use a nylon filter that retains shapebetter than metal and is replaceable. Theinternal Teflon components eliminate theneed for rebuilding. All units are 100%electronically factory tested. This processassures, perfect sealing (0.5 bar), flow rate,durability and maximum performance.Every petcock is warrantied for life and featuresa new, positive stop betweenthe “off” and “reserve” positions.Lifetime warranty. . . . . . . . . . . . . . . . . . . .$83.5929103 Forward outlet29104 Rear outlet29105 Side outletAccel ® High-Flow PetcocksAmerican-made high-flow petcocks feature chrome-platedbodies and 5/16" O.D. hose barbs. Other features include areserve function, 100 micron filtering screens, and easy-tograsphandles. Bodies are engineered to prevent leakage, yetdeliver maximum fuel flow for high-performance applications.One of the petcocks has a swiveling banjo whichrotates 180° for custom hose routing. Fit all OriginalEquipment or aftermarket tanks with 22mm bungs.27051 Petcock with 180° rotating barb . . . . . . . . . . . . . .$82.0827050 Petcock with straight down barb . . . . . . . . . . . . . .$64.57Viton ® Sealsfor PetcocksViton ® material eliminates the swellingproblems associated with the various fuelsavailable today. The 3-hole design (notshown) fits petcocks with .260"-diameterfuel tubes. Pack of 10. . . . . . . . . . . . . .$12.4912728 4-hole seal12731 3-hole seal16.54Prices appearing in this catalog are Suggested Retail Price and are subject to change*

Petcock Covers & Tank PanelsApparelBike Kits& TrailersSeats& BagsFootControlsHandControlsDash Panel for Fat Bob Gas TanksFits Fat Bob gas tanks when dash or instrumentsare not mounted on tanks. . . . . . . . . . . . . . .$24.4926344 PlainLightingElectricalLever Covers for Pingel ® PetcocksYour fuel valve lever will be easier to find andeasier on the eyes with one of these easy-toinstallcovers. Styled to match our Eclipse andMirage ® accessory lines. Fit Pingel ® -style singleoutlet fuel valves only. . . . . . . . . . . . . . . . . . . .$19.9923804 Mirage ® design23803 Eclipse design‘Skull Cock’ Petcock Coversby Skull CityProvides an ominous look as well as a bettergrip on the petcock. Chrome-plated finish withjeweled eyes. Attach with vibration-resistantset screws. Made in the USA. Sold each.Fit Original Equipment Petcockswith Blade Levers25244 Red eyes . . . . . . . . . . . . . . . . . . . . . . .$28.9925217 Black eyes . . . . . . . . . . . . . . . . . . . . . .$28.99Fit Pingel ® 6000-Series Petcocks25216 Red eyes . . . . . . . . . . . . . . . . . . . . . . .$30.4925218 Black eyes . . . . . . . . . . . . . . . . . . . . . .$30.49ExhaustIntakeEngineGasketsCheater Chrome Petcock Coverby KüryAkyn Give your factory petcock a totally custom lookat a third the price of a custom replacementfuel valve. The large hex knob promotes easyoperation. Sold each. . . . . . . . . . . . . . . . . . . . .$31.4948245 Fits Original Equipment petcocksfrom 1981 to presentDash Panels for Fat Bob TanksFits FX and Low Rider ® models with Fat Bob gastanks from 1977 thru 1984. . . . . . . . . . . . . . .$22.8926348 Plain (repl. OEM 61647-77T)310170 Replacement trim rubber . . . . . . . . .$5.79Tranny& ClutchDrivelineWheels,Tires& BrakesFramesChrome Billet Petcock Extensionsby Jesse JamesGet extra leverage and a custom look with thesepetcock lever extensions. Fit Pingel ® Power-Flo petcocks. Made in USA. Sold each. . . . . . .$35.9916953 21/2" extension with clear ‘jewel’16954 21/2" extension with ‘ruby’ red ‘jewel’Chrome Tank PanelFits most models with split tanks, cast dash anda frame-mounted seatfrom 1968 thru 1999. . . . . . . . . . . . . . . . . . . . .$25.9918439 Replaces OEM 61118-81Chrome Tank PanelNew-style, show-chromed tank panel for Softail ®and FXWG models from 1983 thru 1995. . .$37.9984747 Chrome tank panelForks& ShocksSheetmetalGeneralFor the Dealer Nearest You, Call: 800-729-333216.55CrossReference

Dash Covers & Tank PanelsNess-Tech ® Chrome-Plated Dash PanelsOne-piece billet dash covers extend the full length of the tank for a greatlook. The gauge models include the gauge and all necessary plumbing,and all models come with trim rubber for tight, rattle-free fit.05678 Dash cover for Softail ® models from 1996 thru 1999 . . . . . . . .$289.9504943 Dash cover for Softail ® models from 2000 to present . . . . . . . .$289.9505679 Dash cover with gauge for Softail ® models from 1996thru 1999 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$329.9505248 Dash cover for Softail ® and 4-speed FXWG models from 1983thru 1995 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$289.9505680 Dash cover with gauge for Softail ® and 4-speed FXWG modelsfrom 1983 thru 1995 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$329.9505681 Dash cover for Dyna Wide Glide ® models from 1993to present . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$289.95Mirage ® Shorty Dash for Fat Bob TanksSometimes a part screams ‘Superstar’ the first time you see it. That’s howwe feel about the Mirage ® Shorty dash cover. It has that perfect combinationof style and class that makes the whole machine look better. The dashis available in die-cast metal which is polished before its chrome-plated finishis applied, or in more economical chrome-plated ABS plastic. It comescomplete with mounting hardware and rubber trim to protect your tanks.The Mirage ® design scallops have black-painted recesses and double detaillines that accent the top. Does not fit Dyna Wide Glide ® models26007 Cast Mirage ® Shorty Dash Cover . . . . . . . . . . . . . . . . . . . . . . . . . .$101.4926013 ABS Mirage ® Shorty Dash Cover . . . . . . . . . . . . . . . . . . . . . . . . . . .$82.99Note: Shown with CC #27131 Mirage ® speedometer visor which is available separately.Sheetmetal16beforeafterChrome Dash Extension for Road King ® Modelsby Darrell Hayes Custom ConceptsA nice finishing touch for the bottom of the cast dash on Road King ®models. Fits models from 1997 to present, as well as models from 1994thru 1996 when using a custom shorter seat. . . . . . . . . . . . . . . . . . . . . . . . .$59.9915540 Includes mounting hardware‘Inferno ’ Dash Inserts for Fat Bob TanksThe Inferno design is now available as an insert kit for Fat Bob dashes.Chrome-plated, die-cast metal dash inserts match the styling of the widerange of Inferno accessories allowing a completely integrated custom lookfrom the front to the back of your bike. Complete with special adhesivemounting system for easy installation and secure attachment. For allHarley-Davidson ® Big Twin models (except Dyna Wide Glide ® models) 1968thru 1995 equipped with Fat Bob style dash and a pre-1996 FL-stylespeedometer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$46.9927953 Short Inferno dash insert kit16.56Prices appearing in this catalog are Suggested Retail Price and are subject to change*

Dash Covers & Tank PanelsApparelBike Kits& TrailersSeats& Bags62399FootControls27400HandControls6240027401‘Inferno ’ DashesChrome-plated, die-cast metal dashes match thestyling of the wide range of Inferno accessories.Available in short style for use with a traditionaltank panel or in long style. Complete with mountinghardware and rubber trim. Fit all Big Twinmodels (except Dyna Wide Glide ® models) from1968 thru 1995 equipped with Fat Bob tanks anda pre-1996 FL-style speedometer.27400 Short Inferno dash . . . . . . . . . . . . .$104.4927401 Long Inferno dash . . . . . . . . . . . . . .$212.99LightingElectricalExhaustIntake13219Engine62401GasketsDoss Chrome Dashes• Made of billet aluminum and chrome-plated• Each dash includes 3 dash plates that feature a 5 LED, 3LED and plain ball mill designs• Designed to mount on Original Equipment tanks, but willalso work on custom tanks• All necessary mounting hardware included62399 Fits Dyna Wide Glide ® modelsfrom 1990 to present . . . . . . . . . . . . . . . . . . . . . . . . .$250.0062400 Fits Road King ® models from 1994to present . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$250.0062401 Fits Softail ® models from 2000to present . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$250.001322113220Doss Custom DashesThese custom dash panels are American-made and formed from .100"-thick blackA.B.S. plastic which can be custom-painted to match your bike. They’ll fit all twopieceFat Bob gas tanks and are available in three different versions.13221 With cutouts for ignition switch and Fat Bob speedometer . . . . . . . . . . . . . . . .$50.9913220 With 43/4" cutout for large Fat Bob speedometer . . . . . . . . . . . . . . . . . . . . . . . . . .$48.4913219 Plain . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$45.99Tranny& ClutchDrivelineWheels,Tires& BrakesFramesForks& ShocksSheetmetalGeneralFor the Dealer Nearest You, Call: 800-729-333216.57CrossReference

Dash Covers & Tank PanelsLong ‘Mirage ® ’ Dash Coverfor Fat Bob TanksDie-cast dash has a chrome-plated finish.Includes two extra-long trim pieces, a longertrip-meter reset knob and our unique rearhold-down. For all Big Twin models 1968 thru1995 with two-piece Fat Bob or ‘flatside’ gastanks and Fat Bob speedometers (except DynaWide Glide ® models).26015 Complete dash kit . . . . . . . . . . .$199.99Stretched Dash for ‘Touring’Models by Paul Yaffe OriginalsThis sleek fiberglass dash is a direct replacementfor your stock dash and can be cut to length.Made extra-long for the longeststretched tank. . . . . . . . . . . . . . . . . . . . . . . . . .$177.9906566 Replaces the Original Equipment centerfilldash on all fuel-injected FLT and FLHTmodels from 1994 to presentNote: Does not include gas cap and installation may requiresome modifications to the gas tank’Builders Dash’ by Dave PerewitzHand-formed out of 18-gauge steel andstretched to be used on single tank or pair oftanks. Mounting tabs can be welded on.Can be cut to length for shorter tanks. . . .$59.9942949 Builders dashReplacement Parts26001 Trim rubbers (sold in pairs) . . . . .$9.4926003 Rear hold-down (sold each) . . . .$4.39Sheetmetal05005Ness ® Custom DashesCustom A.B.S. plastic dashes will dress up anybike with Fat Bob gas tanks. They come ready tosand and paint with mounting holes pre-drilled.05005 Fits ‘flatside’ Fat Bob gas tanksfrom 1984 thru 1995 . . . . . . . . . . .$69.9505006 Fits Fat Bob gas tanks (except flatside)thru 1984 . . . . . . . . . . . . . . . . . . . . . .$69.95Stretched Dash for ‘Dressers’by Paul Yaffe OriginalsWish your bike had a little more style and a littleless bulk? Paul felt the same way. So he fabbedup this sleek dash to alter the look of his FLT.This fiberglass dash is a direct replacement foryour stock dash and can be cut-to-length. Wemade it extra long for the longest stretch tank.Add swoop to your bulky Bagger!! . . . . . .$165.9947730 Fits all carbureted FLT, FLHT and FLHSmodels from 1987 to presentNote: Does not include gas cap and installation may requiresome modifications to the gas tank.13239Lexan ® Dash Kits with L.E.D’sand VDO SpeedometersThese kits are just the trick for the dressing upyour stock dash or for custom builds. They featurebillet bezels with chrome or polish finishes,a VDO electronic speedometer, super-tuff clearLexan ® dash, late ignition style switch and L.E.D.indicator lamps (black dash is for illustrationpurposes only). Fits the flatside gas tanks fittedto models since 1984. Dash harness plugs directlyinto CC #49202 electronic wiring harness.49215 Dash kit with chrome bezel . . . .$559.9949216 Dash kit with polished bezel . . .$539.99Optional Accessories49202 Complete electronic harness controllerby Thunder Heart. Replaces fuse, relayand flasher functions (see Section 6 forcomplete details) . . . . . . . . . . . . . .$369.9949198 Interface cable for use with standardwiring harnesses. Purchase this unitwhen NOT using Thunderheart wiringharness (CC #49202) . . . . . . . . . . . . .$28.9916Custom Dash for Stretched TanksDurable and paintable ABS plastic dashes withunique design for custom stretched tanks.Available with or without colored lamp lenses.13239 With lamp lenses . . . . . . . . . . . . . . .$61.9913238 Plain (no holes) . . . . . . . . . . . . . . . .$47.9916.58Prices appearing in this catalog are Suggested Retail Price and are subject to change*

Dash Covers & Tank PanelsApparel310546Bike Kits& Trailers311121Seats& Bags311131Milwaukee Iron Stretched Steel DashesHigh quality steel dashes have necessary holes, slots and notches for a truebolt-on installation on late models. Ready for paint or chroming. Rubbertrim strip included. Fits Big Twin models with large diameter tank mountedspeedometer.311121 Straight. Fits FXST, FLST and FXWG models 1984-1990 . . . . . . .$264.99311131 Tapered. Fits FXST, FLST and FXWG models 1984-1990 . . . . . . .$264.99311122 Straight. Fits FXST, FLST and FXDWG models 1991-1995 . . . . .$264.99311132 Tapered. Fits FXST, FLST and FXDWG models 1991-1995 . . . . .$264.99311123 Straight. Fits FXST, FLST and FXDWG models 1996-up . . . . . . .$364.54311133 Tapered. Fits FXST, FLST and FXDWG models 1996-up . . . . . . .$364.54Note: Standard length dashes are a direst bolt-on replacement for the stock dash. The stretchdashes are 23"-long (about 3" over stock length) which require cutting and fitting on the lowerend for correct seat/gas tank/dash fit.Chrome Ball-MilledDash CoversWhether you ride an older FL,late model Dyna or your owncustom creation, now there’s adash to match all your ballmilledcovers and other accessories.This chromecombination of upper andlower panels is sure to dress upany set of Fat Bobs and haveyou cruising in style in no time.310547310546 Upper dash cover. Fits all models with cast dashfrom 1968 thru 1995 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$90.99310547 Lower dash cover. Fits Softail ® models from 1984thru 1999 and FXWG from 1983 thru 1986 . . . . . . . . . . . . . . . . . .$82.99310548 Lower dash cover. Fits all Dyna Wide Glide ® models from 1993 topresent . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$140.44FootControlsHandControlsLightingElectricalExhaustIntake05589Engine0559305590GasketsNess-Tech ® Fuel Door/Tank Panelfor Dresser ModelsDress up the dash on your bike with a chromeplatedbillet fuel filler trap door and tank panelfrom Arlen Ness ® . Fuel door and dash panelhave vertical ball milled grooves. Fuel doors fitall FLT, FLHT and FLHS models from 1989 to present,and the dash insert fits all the same models(except Ultra Classic ® models).05143 Fuel door . . . . . . . . . . . . . . . . . . . . . . . .$74.9405682 Lower dash insert . . . . . . . . . . . . . . . .$79.9505594Ness-Tech ® Billet Dash Covers and PanelsNess offers you more great-looking accessories made from chrome-plated 6061-T6 billet aluminum.Dash covers install over the Original Equipment dashes and the lower panels cover the tanks.For Softail ® ModelsFit cast dash baseplate on models with split tanks from 1984 to present.Grooved Flamed05589 05593 Dash cover for models from 1984 thru 1995 . . . . . . . . . . . . . . . . . . . . . . . . . . .$89.9505591 05595 Dash cover for models from 1996 to present (except Deuce models) . . .$89.9505590 05594 Lower panel for models from 1984 thru 1999 . . . . . . . . . . . . . . . . . . . . . . . . . .$89.95For Dyna Wide Glide ® ModelsFit all Dyna Wide Glide ® models from 1993 to present.Grooved Flamed05592 05596 Lower tank panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$89.95Tranny& ClutchDrivelineWheels,Tires& BrakesFramesForks& Shocks05146 05961Ness-Tech ® Billet Dash Panels for Road King ® ModelsThere have been few custom parts for the Road King ® dash, but with these beautiful chrome-platedbillet aluminum dash covers, you get that distinguishing Arlen Ness touch that sets your bike apartfrom the crowd. Fit all Road King ® models from 1995 to present.05146 Grooved . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$119.9905961 Stepped . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$139.99For the Dealer Nearest You, Call: 800-729-333216.59SheetmetalGeneralCrossReference

Dash Covers & Tank Panels26188Cateye Dash for Fat Bob TanksShow-chrome cateye-style dash with lenses.Replacement lenses are sold each.26189 Cateye dash . . . . . . . . . . . . . . . . . . . .$67.2426356 Red replacement lens . . . . . . . . . . .$7.99Chrome ‘Skull’ DashReplica of the dash cover used on 1936 thru1938 Knuckleheads that fits the OriginalEquipment dash plate. Also for 1939 thru 1946models when used with CC #26190 dash base.For installation on standard Fat Bob tanks used1947 thru 1984, use CC #26498 dash base(will not work with ‘flatside’ tanks). . . . . . .$66.7926166 Chrome ‘Skull’ dash25972Classic Cast DashesHeavy-duty zinc die-cast dashes are beautifully chrome-platedduplicates of their Original Equipment counterparts.Complete in every detail, each dash also includes the lenses,light divider, and trim rubbers. May be installed onmost 4-speed frames and Softail ® models when theappropriate dash baseis used. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$74.4926187 Fits all models 1968 thru 1990(replaces OEM 71241-68B)26186 Fits all models with self-cancelling turnsignals from 1991 thru 1995 (except DynaWide Glide ® models) replaces OEM71241-91Replacement PartsThese pieces will fit Original Equipment dashes as well asthe dashes listed above.26239 Lens kit: Includes lenses, divider and hardware . . . . . .$15.4926240 Trim rubbers (pair) replaces OEM 71295-68 . . . . . . . . . . .$4.9926238 Cast dash mounting plate . . . . . . . . . . . . . . . . . . . . . . . . . .$71.99Two-Light and Three-LightDashes for Fat Bob TanksShow-chrome dash covers complete with lensesand trim rubber. Replacement lenses and trimrubber also available separately.26188 2-light dash . . . . . . . . . . . . . . . . . . . .$70.4925972 3-light dash . . . . . . . . . . . . . . . . . . . .$63.4926180 Replacement trim rubber . . . . . . . .$4.99Sheetmetal16Trimlok Dash TrimEasy-to-install, while providing style and protection.Genuine Trimlok steel reinforced vinyl trimis cut to length to fit all stamped steel two andthree-light dashes. Available in pre-cut 27 inchand 10 foot lengths in plain black.26181 Black (27"-long) . . . . . . . . . . . . . . . . .$4.9926241 Black (10 feet-long) . . . . . . . . . . . .$10.99Rubber Dash TrimThis handy item is designed to replace the rubberdash trim on 1987 thru 1994 FXR models andthe nacelle trim on 1987 thru 1994 FLHS models.The trim is also a perfect match for CustomChrome ® Rick Doss ABS dashes and many otherprotective uses.50"-long. . . . . . . . . . . . . . . . . .$5.0913232 Replaces OEM 61117-86Custom Dash CoverThis custom dash cover has had the indicatorlights and switch hole removed for a clean customlook. Designed for use with large diameterFL style speedometer and Fat Bob ® tanks. Perfectfor custom FX and FL applications with remotemounted indicator lights and ignition switches.Fits all Big Twin 4-speed models.310146 Dash only(fits all two-light base plates) . . .$48.4916.60Prices appearing in this catalog are Suggested Retail Price and are subject to change*

27454Dash Covers & Tank PanelsChrome Dash Kit for Softail ® ModelsComplete kit includes chrome dash, name plate, lens kit, speedometer back, speedometer seal, mountingbracket, ignition switch with keys, dash trim, and hardware. Fits all Softail ® models with electronic speedosfrom 1996 thru 1999.27454 Complete dash kit (repl. OEM 71254-96) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$119.99Components27453 Dash panel kit includes dash, lens kit, dash trim and nameplate . . . . . . . . . . . . . . . . . . . . . . .$69.9927455 Lens kit includes lens and lens divider (repl. OEM 71146-94) . . . . . . . . . . . . . . . . . . . . . . . . . . .$6.4927456 Name plate (repl. OEM 71302-93) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$4.1927458 Dash mounting bracket (repl. OEM 67260-96) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$4.9927457 Speedometer back (repl. OEM 672171-94) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$6.4927462 Speedometer seal for Dyna Wide Glide ® models from 1993 to present, Softail ® modelsfrom 1996 thru 2000 and Road King ® models from 1994 to present (repl. OEM 67190-89) . . .$4.1927463 Chrome ignition switch with keys (repl. OEM 71313-96) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$24.4927464 Chrome 1/4"-20 hex acorn nut (repl. OEM 7497) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$2.49ApparelBike Kits& TrailersSeats& BagsFootControlsHandControlsLightingElectricalExhaustTrim Rubber for Low Rider ® DashThick style, black rubber trim for FX dual gaugehousings. Neatly fills the open space betweenthe tanks and the instrument housing while isolatingthe gauges from vibration. . . . . . . . . .$9.4926338 Replaces OEM 61401-82Dash Switch DecalFits FL models from 1968 thru 1984, FX modelsfrom 1971 thru 1972, FXWG models from 1980thru 1986, and Softail ® models from 1984 thru1999. Sold in pack of 5. . . . . . . . . . . . . . . . .$10.99310136 Replaces OEM 71300-79Chrome Dash KitAll the chrome parts in one convenient kit tohelp you convert to the dash used on severalmodels 1977 thru 1984. Will not work withflatside gas tanks. . . . . . . . . . . . . . . . . . . . . .$55.9991339 Complete kitIntakeEngineGasketsTranny& ClutchSlotted Dash CoverThis custom dash cover features a distinctiveslotted styling. Comes complete with indicatorlens assembly, trim rubber and mountinghardware. Fits Big Twins with Fat Bob ® tanksthru 1995.310178 Standard length . . . . . . . . . . . . . . .$85.99Chrome Steel Dash Paneland Filler StripsCovers the gap between gas tanks on 1984 andearlier models. Attaches with rubber mountingband and clips. Sold each.310505 . . . . . . . . . . . . . . . . . . . . . . . . . . . .$18.49Skull LowerTank PanelMultiple skull design castfrom an original handcarved mold. . . . . .$42.3437734 Fits most Fat Bobcast dashesfrom 1965 topresentSteel Chrome Dash for FX ModelsStamped steel, chrome-plated instrumenthousing for tank mounted gauges on FXmodels from 1977 thru 1984. Includes thickstyle tank-to-housing trim rubber and warninglight hole plugs for custom applications.26339 Dash cover . . . . . . . . . . . . . . . . . . . . .$40.1426338 Replacement trim rubber(repl. OEM 61401-82) . . . . . . . . . . . .$9.4926308 Hole plugs (pack of 10) . . . . . . . . .$20.49DrivelineWheels,Tires& BrakesFramesForks& ShocksSheetmetalGeneralFor the Dealer Nearest You, Call: 800-729-333216.61CrossReference

Tank PanelsAce Metal Stylized Tank PanelsA new line of stylized accessories. Jewelry gradeconchos decorate these billet aluminum parts.Iron Cross and 8 Ball are glossy, baked ceramicon a heavy metal base. 3-D Skull is a polishednickel casting with a dark background. Handmadein the USA. Fit Big Twin models from1983 thru 1995 (except Dyna Wide Glide ® andRoad King ® models) Sold each. . . . . . . . . . .$100.9906068 3-D Skull06069 8-Ball06070 Iron Cross (not available in Europe)310579 Jolly RogerReverse-Lace Leather Tank PanelReverse-laced trim adds the finaltouch to these fine American-madetank panels for Fat Bob tanks.Include straps and fit Low Rider ®and Sturgis ® models from 1977thru 1984. . . . . . . . . .$44.9925732 Sold each27250269732591525916Discontinued2579727252Leather Tank Panels with Storage PouchAmerican-made tank panels are constructed with a heavycowhide base that is water resistant. Each panel features anickel-silver concho and roomy pouches are made of supplepebble-grained leather with a Velcro ® closure.27250 Fits all Dyna Glide models from 1991 to present(except Dyna Wide Glide ® models) . . . . . . . . . . . . . .$76.9927252 Fits 1993 to present Dyna Wide Glide ® models . .$69.4926973 Fits Low Rider ® and Sturgis ® models from 1977thru 1984 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$95.99Leather Tank Panels with Expandable PouchesHand-crafted black leather tank panels provide the added convenience of a storagepouch within easy reaching distance. Top flaps are accented with nickel silver conchosand secured with Velcro ® . Pouches measure 8" x 4" and expand to over 2" deep thanksto our unique pleated side panels with Velcro ® . They fit 1968 thru 1984 4-speed FLmodels, as well as all Softail ® and 4-speed FXWG models 1980 to present (except FLSTCHeritage Softail ® Classic models).25797 Plain . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$44.9925915 With studs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$49.4425916 With studs and fringe . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$50.94Sheetmetal16Double-Laced Custom Tank PanelFits FXWG and Softail ® models with steel dash.25787 With concho and eagle logo . . . . .$58.4925788 With concho ONLY . . . . . . . . . . . . . .$52.4916.62Tank Panel with Storage Pouchfor Softail ® ModelsDesigned for use on all Softail ® and 4-speedFXWG models (except FLSTC Heritage Softail ®Classic models) from 1984 thru 1999. . . . . .$72.9925807 Fits Softail ® models using the earlytwo-light, three-light or Cateye dashPrices appearing in this catalog are Suggested Retail Price and are subject to change*2690525601Leather Tank Panelswith Chrome StudsFeature heavy-duty leather, black vinyl welting,and unique chrome studs. Both tank panels willfit a variety of models with cast dashes.25601 Fits 1968 thru 1984 4-speed FL models,and all FXWG and Softail ® models from1980 thru 1999 (except FLSTC HeritageSoftail ® Classic models) . . . . . . . . .$64.9926905 Fits FLSTC Heritage Softail ® Classic modelsfrom late 1987 thru 1999 . . . .$58.99

Dash Cover AccessoriesApparelBike Kits& TrailersSeats& BagsOdometer Reset Cablefor FX ModelsComplete odometer reset cable assembly forall 4-speed FX models (except FXWG) 1973 thru1984. Includes chrome knurled knob, rubbergrommet, washer, spring and flexible cable.Fully assembled, ready to install. . . . . . . . . .$10.9926445 Replaces OEM 67210-73TSpeedometer Adapter KitUsed when installing FX tank mounted twinpod gauges on pre-1985 3.5 or 5.0 gallonFat Bob tanks. Exacting reproduction of stockpieces, complete set includes speedo andtach cup brackets, hardware and the correctrubber mounts. . . . . . . . . . . . . . . . . . . . . . .$16.9926442 Complete kitDash Replacement PartsSold each.310126 Cateye dimmer switch with knob . .$9.49FootControlsHandControlsLightingHi-Beam Indicator LampOriginal style, multi-piece high beam indicatorlamp assembly with replaceable bulb included.Fits FX models from 1973 thru 1974, as well asSportster ® models from 1968 thru 1973. Can alsobe used to replace the one-piece ‘throwaway’indicator lamp used on FX models from 1975thru 1985. . . . . . . . . . . . . . . . . . . . . . . . . . . . .$9.4926444 Replaces OEM 67891-68Instrument LightSocket AssembliesOEM style replacement light socket assembliesinclude socket with wire and bulb. Available formost Big Twins and Sportster ® models 1976-up.Sold in 5 packs.310113 Steel, 1 wire type . . . . . . . . . . . . . . .$19.34Dash Center Mounting Boltand StudIncludes chrome-plated center screw with studand hardware. Fits Big Twins from 1947 thru1967 as original part replacement or can be usedon custom applications where choke wire is notbrought through dash. . . . . . . . . . . . . . . . . . . .$10.9926162 Sold eachElectricalExhaustIntakeEngineGaskets26356310154Tranny& Clutch263522635326354Replacement Lensesfor Fat Bob Dash CoversCan be used to restore Original Equipmentdashes or as replacement parts for CC dashes.Sold each.26356 Cateye red lens-plastic . . . . . . . . . . . .$7.9926354 3-light dash red lens(2 used) – plastic . . . . . . . . . . . . . . . . . .$8.9426353 3-light dash blue lens(1 used) – plastic . . . . . . . . . . . . . . . . . .$8.9426352 2-light dash red lens – plastic . . . . . .$7.99310154 Cateye dash lens, green . . . . . . . . .$6.64Chrome Skull Nut CoverMade in the U.S.A. by Wild 1 Mfg. to cover thehardware that holds the dash in place. Kitsinclude silicone for installation and red rhinestonesfor the eyes. Fits the cast dash on modelswithout a dash-mounted choke cable. . . .$19.9519971 Sold eachChrome Dash Cover ScrewsComplete 4-piece set of chrome plated, buttonheadpanel screws. Fit all Low Rider ® and FXEFdashes 1977 thru 1984. . . . . . . . . . . . . . . . . .$7.9926441 Set of 4DrivelineWheels,Tires& BrakesFramesForks& ShocksSheetmetalGeneralFor the Dealer Nearest You, Call: 800-729-333216.63CrossReference

Dash Mounting PlatesTwo-Light Dash Mounting PlateIncludes wiring and sockets.26343 Includes circuit breaker clips: fits CC dash #26188 . . . . . . . . . . .$63.4926191 Replacement dash base light sockets (pack of five) . . . . . . . . .$24.49Late-Style Cast Dash Mounting PlateA complete mounting kit for many models with cast dashes from 1968thru 1999 (except Dyna Wide Glide ® models). Includes all the hardware andspacers necessary to fit both the standard early-style Fat Bob tanks and thelater-style flatside Fat Bob tanks. Also included are the circuit breaker clips,the rubber strip for mounting circuit breakers with flatside tanks, ignitionswitch mounting screws, three insulated terminal studs and five light socketswith bulbs. Everything necessary for a quick and easy installation.26238 Fits CC #’s 26186 and 26187 dashes or Original Equipmentcast dashes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$71.9926191 Replacement dash base light sockets (pack of five) . . . . . . . . .$24.49SheetmetalThree-Light Dash Mounting PlateIncludes wiring and sockets.25971 Fits CC dash #25972 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$63.4926191 Replacement dash base light sockets (pack of five) . . . . . . . . .$24.49Plain DashMounting PlateBasic mounting plate for use withFat Bob dash covers #25972 and#26188 when dash lighting is notdesired. . . . . . . . . . . . . . . . . . . . . .$19.9925235 Without dash lightsLight Dividerfor 3-Light DashReproduction of the hard-to-findpart used on three-light dashes fittedto models with Fat Bob tanksfrom 1963 thru 1967. . . . . . .$6.4991700 Replaces OEM 71292-62161947-83 Cateye and Skull Dash Mounting PlateIncludes wiring and sockets.26498 Fits CC or 1947-83 OEM tanks (does not fit flatside tanks).Fits CC #’s 26189 and 26166 dash covers . . . . . . . . . . . . . . . . . . . . .$71.8926191 Replacement dash base light sockets (pack of five) . . . . . . . . . . .$24.49Early Style Base Plate KitsKits include base plate, indicator light sockets, and mounting hardware.310141 Cateye base kit for all models from 1936 thru 1946 . . . . . . . . . .$52.99310140 Cateye base kit for all models from 1947 thru 1983 . . . . . . . . .$52.99Note: Does not fit flat side tanks31014016.64Prices appearing in this catalog are Suggested Retail Price and are subject to change*

Dash KitsApparelBike Kits& TrailersSeats& BagsFootControlsHandControlsDash Kit with Integral TachFeatures a 120 mph speedometer with built-incoil driven tachometer that works with allHarley ® 12 volt systems. Kit includes speedometer,two-light chrome dash cover, base platewith hardware, and ignition switch with keys.310139 2:1 speedo/tach dash kit . . . . . . .$192.99Note: 1991-up self-canceling turn signals will not self cancel.1991-up models use a distance counting reed switch to selfcancelturn signals. The turn signals will operate normally,but will not self cancel.LightingElectricalExhaustChrome Dash and Speedometer KitsIncludes a speedometer with 1989-up face, chrome dash, lenses, rubber trim, mounting hardware,ignition switch with two keys and base plate with lights. Fit many models with Sport Bob and Fat Bobtanks thru 1995. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$237.99 to $256.9926480 2240:60 ratio for front wheel speedometer drive models with self-cancelling turn signals from1984 thru 199526481 2240:60 ratio for front wheel speedometer drive models without self-cancelling turn signalsfrom 1984 thru 199026482 2:1 ratio for FL models with transmission speedometer drives from 1947 thru 1967, andSportster ® , FX and FXR models with front wheel speedometer drives from 1973 thru 1990(except Softail ® and 4-speed FXWG models)IntakeEngineGasketsChrome Die-Cast Dash Kitfor Fat Bob TanksKits include chrome die-cast dash with trimrubber and lenses, speedometer, ignitionswitch and base plate assembly with hardware.Ideal for ground-up assembly or Fat Bob ® tankconversions. Available with 1:1 drive ratios.310175 1:1 ratio kit. Fits FL models 1962-1980,FX models 1971-1972 and FXWGmodels 1980-1983 . . . . . . . . . . . . . .$172.54310192310195Tranny& ClutchDrivelineWheels,Tires& BrakesFramesChrome Dash and Mounting KitsThese chrome kits contain the dash mounting and trimparts required for Fat Bob ® tanks in a single, easy-to-orderpackage - simply choose from our great variety of largediameter speedometers to complete the installation. Eachkit comes complete with chrome dash cover, base plateassembly with hardware and ignition switch with keys.Note: Not compatible with flat side tanks.310193310194Forks& ShocksSheetmetal310192 Cateye dash and mounting kit . . . . . . . . . . . . . . .$149.67310193 Two-light dash and mounting kit . . . . . . . . . . . .$135.99310194 Three-light dash and mounting kit . . . . . . . . . . .$135.99310195 Late-style dash and mounting kit . . . . . . . . . . . .$135.99GeneralFor the Dealer Nearest You, Call: 800-729-333216.65CrossReference

Speedometers917179171091975Dash and Speedometer Kits with DashplatesComplete kits with a speedometer, dash, trim, dashplate with light sockets,and ignition switch for Softail ® and 4-speed FL and FX models from 1936thru 1995. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$231.99Note: These kits may be installed on models 1991 thru 1995 if the self-cancelling turn signalfeature is forfeited.91710 3-light dash with 1:1 ratio speedometer91963 3-light dash with 2:1 ratio speedometer91717 2-light dash with 1:1 ratio speedometer91716 2-light dash with 2:1 ratio speedometer91975 Cateye dash with 1:1 ratio speedometerNote: Cateye dash kits will not work with ‘flatside’ gas tanks.29515Sheetmetal16Inferno Custom Face SpeedometersThe hot Inferno flames in chrome right on the speedo face. 110 MPHspeedometer with resetable trip odometer includes mounting kit andrubber dampener.27931 1:1 ratio for 4-speed FL and FX models with transmission-drivenspeedometers from 1968 thru 1983. Requires a speedometer cablewith a 5/8"-18 threaded nut . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$81.4927933 2:1 ratio for FL models with transmission speedometer drives from1947 thru 1967, and Sportster ® , FX and FXR models with front wheelspeedometer drives from 1973 thru 1990 (except Softail ® and4-speed FXWG models). Requires a speedometer cable witha 5/8"-18 threaded nut . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$81.4927934 Same as CC #27933 but reads in KPH (kilometers per hour) . . . .$81.4927935 2240:60 ratio for all Softail ® and 4-speed FXWG models from 1984thru 1990, and 4-speed FL models with front wheel speedometerdrives from 1981 thru 1984. Requires a speedometer cable with a12mm threaded nut . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$81.4927937 2240:60 ratio with reed switch for all Softail ® models from1991 thru 1995 with front wheel speedometer drives andself-canceling turn signals. Requires a speedometer cablewith a 12mm threaded nut . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$106.1429517‘Premium ® ’ SpeedometersManufactured by the Original Equipment supplier and feature a qualityglass lens, and a resettable trip mileage indicator. They’re availableto fit FXLR models and most models with Fat Bob dashes from1981 thru 1995. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$114.99Fits the handlebar-mounted brackets on FXLR models from 1991 thru 1994.29513 MPH face (repl. OEM 67025-91)Fits all Softail ® and 4-speed FXWG models from 1984 thru 1990, and4-speed FL models with front wheel speedometer drives from 1981thru 1984. Requires a speedometer cable with a 12mm threaded nut.29514 MPH face (repl. OEM 67027-81C)29517 KM/H face (repl.OEM 67030-81D)Fits all Softail ® models from 1991 thru 1995 with front wheel speedometerdrives and self-canceling turn signals. Requires a speedometer cable witha 12mm threaded nut.29515 MPH face (repl. OEM 67027-91)29516 KM/H face (repl.OEM 67030-91A)16.66Prices appearing in this catalog are Suggested Retail Price and are subject to change*

SpeedometersApparelFlamedCarbon FiberLookU.S. Patent #4,848,154Bike Kits& TrailersSeats& Bags310643FootControlsHandControlsFlamed (RPM)Premium ® Custom Face SpeedometersHere’s a great custom look with all thesolid engineering found in our best-sellingPremium ® speedometers. Available formost models with large Fat Bob dashes1947 thru 1995. Feature glass lenses, resettabletrip meter, mounting kit with rubberdampener, and light socket with bulb.2240:60 Ratio SpeedometersFit all Softail ® and 4-speed FXWG modelsfrom 1984 thru 1990, and 4-speed FL modelswith front wheel speedometer drivesfrom 1981 thru 1984. Requires a speedometercable with a 12mm threaded nut.24702 Carbon fiber look . . . . . . . . .$79.9924706 Sunset . . . . . . . . . . . . . . . . . . .$79.9927942 Flamed . . . . . . . . . . . . . . . . . . .$79.99310643 Flamed (RPM) . . . . . . . . . .$124.9926733 Billet look . . . . . . . . . . . . . . . .$64.99Note: May be installed on models from 1991 thru1995 if the self-canceling turn signal feature isforfeited and a pre-1991 dash cover is installedto accommodate the odometer reset knob.2240:60 Ratio with Reed SwitchFit all Softail ® models from 1991 thru 1995with front wheel speedometer drives andself-canceling turn signals. Requires aspeedo cable with a 12mm threaded nut.24703 Carbon fiber look . . . . . . . . .$88.9924707 Sunset . . . . . . . . . . . . . . . . . . .$88.9927943 Flamed . . . . . . . . . . . . . . . . . . .$88.9926736 Billet look . . . . . . . . . . . . . . . .$59.84Note: These speedometers may only be installed inconjunction with the 1991 thru 1995 cast dash orCustom Chrome ® equivalent to accommodate theodometer reset knob.Billet LookSunset2:1 Ratio SpeedometersFit FL models with transmission speedometerdrives from 1947 thru 1967, andSportster ® , FX and FXR models with frontwheel speedometer drives from 1973 thru1990 (except Softail ® and 4-speed FXWGmodels). Requires a speedometer cablewith a 5/8"-18 threaded nut.24705 Sunset (MPH) . . . . . . . . . . . . .$79.9927941 Flamed (MPH) . . . . . . . . . . . .$79.9926732 Billet look (MPH) . . . . . . . . .$64.99Note: Installation on 1973 and later Sportster ® , FXand FXR models will require the additional purchaseof one of the custom speedometer cables listed elsewherein this section. May be installed on modelsfrom 1991 thru 1994 with front wheel speedo drivesif the self-canceling turn signal feature is forfeited.1:1 Ratio SpeedometersFits 4-speed FL and FX models with transmission-drivenspeedometers from 1968thru 1983. Requires a speedometer cablewith a 5/8"-18 threaded nut.24704 Sunset (MPH) . . . . . . . . . . . . .$79.9927940 Flamed (MPH) . . . . . . . . . . . .$79.9926731 Billet look (MPH) . . . . . . . . .$64.99SpeedoTach 2 for Fat Bob DashesOur new and improved combination speedometer andtachometer for all large Fat Bob dashes from 1947 thru 1990.The precision-built 120MPH speedometer is combined with asolid state 6000RPM electronic tachometer that accuratelytracks engine speed by reading the coil output. Both instrumentsare designed to withstand vibration and maintain accuracythroughout all speed ranges, and now the wiringattaches to threaded posts on the back of the gauge.Standard features include a glass lens, new graphics, a wiringharness and complete mounting kit (CC #25965). . . .$131.4927981 2:1 ratio for FL models with transmission speedometerdrives from 1947 thru 1967, and Sportster ® ,FX and FXR models with front wheel speedometerdrives from 1973 thru 1990 (except Softail ® and4-speed FXWG models). Requires a speedometercable with a 5/8"-18 threaded nutCustom Front Wheel Speedometer CablesUnique cables that permit you to combine a CC #27981speedometer/tachometer with front wheel drive units. Cableshave a 5/8"-18 large coarse thread on the speedometer end.BLACKSTAINLESSLENGTH VINYL STEEL381/2" 19081 . . . . .$64.59 n/a421/2" 19095 . . . . .$28.79 13564 . . . . . .$30.49Note: CC #27981 speedometers may be installed on models from 1991 thru1994 if the self-cancelling turn signal feature is forfeited.LightingElectricalExhaustIntakeEngineGasketsTranny& ClutchDrivelineWheels,Tires& BrakesKM/H Face Fat Bob SpeedometersThese units feature quality glass lenses and resettableodometers. They fit most Fat Bob dashes, andrequire speedometer cables with a 5/8"-18 thread.Face 1:1 ratio 2:1 ratio1936-1940 85731 85732 . . . . . . . . . . . . . .$67.991962-1967 85557 85558 . . . . . . . . . . . . . .$67.991968-1984 85729 85720 . . . . . . . . . . . . . .$67.99KM/H Face SpeedoTachsThe same features as the speedometers listed abovewith the addition of an integrated electronictachometer. Includes installation instructions.85733 1:1 ratio . . . . . . . . . . . . . . . . . . . . . . .Call for Price85734 2:1 ratio . . . . . . . . . . . . . . . . . . . . . . . . . . .$111.99FramesForks& ShocksSheetmetalGeneralFor the Dealer Nearest You, Call: 800-729-333216.67CrossReference

Digital SpeedometersDigital Auto Calibration Speedometer and Multi-Gauge UnitEnjoy the benefits of immediate status monitoring and the ease of a digital readout in one package.Thanks to the latest in digital circuitry, days of bunglesome multi-gauge clusters are history. This twocolorLCD display packs the speedo, tach, voltmeter, odometer and trip odometer into one clean, customunit. The tach reads from 0 to 8,000 RPM with a bar graph wrapping around the outer rim and a 6,000RPM redline. A bar graph voltmeter registers 8-18 volts to monitor the health of your charging system.The speedometer section reads out to 180 MPH with an odometer to 199,999 miles and a trip odometer999.9 miles. Special functions include a highest top speed and 0-60 elapsed time recall. Speedometersuse cable drives with an analog to digital conversion at the gauge. Unit incorporates a built-in reedswitch automatic turn signal self-canceling circuit for installation on the latest models. Rubber mountinggrommets and anti-vibration dampener included. Made in USA. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$562.49310658 Fits models with 2:1, 1:1 and 2240:60 ratio drives (includes a front wheel drive cable)Sheetmetal16Dakota Digital Electronic HLY-2000Instrument for Fat Bob Gas TanksThis electronic instrument from Dakota Digital is the firstcomplete engine and vehicle status system in one compactself-contained gauge. Designed to fit in standard tankmounted dashes, the large teal green display is easilyreadable in direct sunlight and comes with a manufacturer’s3 year warranty. Features include:• 0-255 MPH digital speedometer• Quick response bar graph tachometer• Digital odometer with resettable trip feature• Built-in turn signal indicators• Low voltage and low oil warning indicator• Neutral indicator• High beam indicator• Automatic night dimming circuitryEach instrument includes a speed output wire for modelswith self-canceling turn signals and is adjustable for tire sizeand 1:1, 2:1 or 2240:60 drive ratios. Available with MPH or KPHreadout for cable or electric drive.Note: 310663 and 310664 require the purchase of the appropriate sender forproper operation.MPH Instruments310663 Universal speedometer head. Fits all models 1947-1995and electric driven Softail ® and Road King ® models1995 to present . . . . . . . . . . . . . . . . . . . . . . .$474.29KPH Instruments310664 Universal speedometer head. Fits all models 1947-1995and electric driven Softail ® and Road King ® models1995 to present . . . . . . . . . . . . . . . . . . . . . . .$474.99Sender Units310661 Sender for cable driven models (5/8”-18 fitting)can be remotely mounted) . . . . . . . . . . . . .$35.94310662 Sender for electric driven models (plugs into stock1996 to present speedo sender) . . . . . . . .$20.94310654 Sender unit inductive pick-up sensor reads chainsprocket teeth . . . . . . . . . . . . . . . . . . . . . . . . .$71.24310669310663LOW VOLTAGELOW OILODOMETERTURN INDICATORDakota Digital Speed Generator InterfaceUse this device to re-calibrate your electronic speedometer for correct speed andmileage readout. Simple plug-in installation and potentiometer adjusters allow quick,easy and accurate calibration. Fits all models from 1996 to present and custom applications.Made in USA.310669 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$124.9916.68Prices appearing in this catalog are Suggested Retail Price and are subject to change*

SpeedometersApparel1946-471936-40Bike Kits& TrailersSeats& BagsFootControlsHandControls1962-671968-84LightingElectricalMountingHardwareIncludedExhaustLate 1989UpPremium ® SpeedometersPremium ® speedometers feature a qualityglass lens, resettable trip mileage indicator,speedometer mounting kit (CC #25965), and a rubberspeedometer dampener (CC #25959).They are available in 1:1, 2:1 and 2240:60 ratios toto fit most models with Fat Bob dashes. The wideselection of speedometer faces represents moststyles 1936 to present. Combined with the abilityto specify drive ratio, you can detail yourspeedometer to suit the look of your bike.2:1 Ratio SpeedometersFits FL models with transmission speedometerdrives from 1947 thru 1967, and Sportster ® , FX andFXR models with front wheel speedometer drivesfrom 1973 thru 1990 (except Softail ® and 4-speedFXWG models). Requires a speedometer cable witha 5/8"-18 threaded nut. . . . . . . . . . . . . . . . . . .$79.9926712 1936-1940 face26714 1941-1945 face26711 1946-1947 face26716 1956-1961 face25963 1962-1967 face (repl. OEM 67064-85T)25962 1968-1984 face (repl. OEM 67087-85T)26742 Late 1989-up face (120 mph)26745 Late 1989-up face (180 km/h)Note: Installation on 1973 and later Sportster ® , FX and FXRmodels will require the additional purchase of one of thecustom speedometer cables listed elsewhere on this page.May be installed on models from 1991 thru 1994 with frontwheel speedometer drives if the self-canceling turn signalfeature is forfeited.1956-611941-451:1 Ratio SpeedometersFits 4-speed FL and FX models with transmissiondrivenspeedometers from 1968 thru 1983.Requires a speedometer cable with a 5/8"-18threaded nut. . . . . . . . . . . . . . . . . . . . . . . . . . . . .$79.9926713 1936-1940 face26715 1941-1945 face25975 1946-1947 face26717 1956-1961 face26710 1962-1967 face (repl. OEM 67004-62T)25973 1968-1984 face (repl. OEM 67004-68TB)26987 Late 1989-up face (120 mph)2240:60 Ratio SpeedometersFits all Softail ® and 4-speed FXWG models from1984 thru 1990, and 4-speed FL models with frontwheel speedometer drives from 1981 thru 1984.Requires a speedometer cable with a 12mmthreaded nut. . . . . . . . . . . . . . . . . . . . . . . . . . . . .$81.4925917 1936-1940 face25918 1941-1945 face25919 1946-1947 face25922 1956-1961 face25923 1962-1967 face25924 1968-1984 face26743 Late 1989-up face (120 mph)Note: May be installed on models from 1991 thru 1995 if theself-canceling turn signal feature is forfeited and a pre-1991dash cover is installed to accommodate the odometer resetknob.2240:60 Ratio with Reed SwitchFits all Softail ® models from 1991 thru 1995 withfront wheel speedometer drives and self-cancelingturn signals. Requires a speedometer cable with a12mm threaded nut. . . . . . . . . . . . . . . . . . . . .$101.4926744 Late 1989-up face (120 mph)replaces OEM 67027-91ANote: This speedometer may only be installed in conjunctionwith the 1991 thru 1995 cast dash or Custom Chrome ® equivalentto accommodate the odometer reset knob.Speedometer Mounting Kit and RubberSpeedometer DampenerFit all models with cast dashes from 1968 topresent. Kit includes rubber dash gasket, twomounting pins with clips, and two grommets.25965 Complete kit (repl. OEM 67066-76)pack of ten . . . . . . . . . . . . . . . . . . . . . .$50.9925959 Rubber dampener for Fat Bobspeedo-meters when used with a cast dashon Big Twins from 1968 thru 1995(repl. OEM 67115-91) . . . . . . . . . . . . .$5.99Speedometer Light SocketsIncludes 12-volt bulbs. Pack of 10. . . . . . . . .$45.4925966 Replaces OEM 71151-70Custom Front Wheel Speedometer CablesUnique cables that permit you to combineour 2:1 ratio speedometers with front wheelspeedometer drive units. Cables have a 5/8"-18large coarse thread on the speedometer end.BLACKSTAINLESSLENGTH VINYL STEEL381/2" 19081 . .$64.59 n/a421/2" 19095 . .$28.79 13564 . .$30.49Speedometer Mounting Kit and RubberSpeedometer DampenerFit all models with cast dashes from 1968 thru1995. Kit includes rubber dash gasket, two mountingpins with clips, and two grommets.25965 Complete kit (repl. OEM 67066-76)pack of ten . . . . . . . . . . . . . . . . . . . . . .$50.9925959 Rubber dampener for Fat Bob speedometerswhen used with a cast dashon Big Twins from 1968 thru 1995(repl. OEM 67115-91) . . . . . . . . . . . . .$5.99IntakeEngineGasketsTranny& ClutchDrivelineWheels,Tires& BrakesFramesForks& ShocksSheetmetalGeneralFor the Dealer Nearest You, Call: 800-729-333216.69CrossReference

SpeedometersPolice Special SpeedometersThese quality units are available in 1:1 and 2:1drive ratios. Speedometers come with rubberisolation kit and Late-Style threaded reset knobstud. When used with early steel dashes, antiquereset knob is required. Reset knobs sold separately.1:1 Ratio Speedometers (1000rpm = 60mph)Fits FL models 1962-1980, FX models 1971-1972and FXWG 1980-1983 with transmission driveunit. 5/8”-18 cable fitting.310392 Police special face . . . . . . . . . . . . . . .$66.492:1 Ratio Speedometers (2000rpm = 60mph)Fits FL models 1947-1961 with transmission driveunit and FX, or custom models 1973-1990 withfront wheel drive unit. 5/8”-18 cable fitting.310393 Police special face . . . . . . . . . . . . . . .$66.49Doss Speedometer VisorsAdd a unique styling touch in minutes with either of these Rick Doss designs. Chrome-plated, die-castmetal, easily installed using silicone adhesive provided. Sold each. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$21.79For Late Electronic SpeedometersFit all large FL-style electronic speedometers on Road King ® models from 1994 to present,Dyna Wide Glide ® models from 1995 to present and Softail ® models from 1996 to present.46381 Waterfall46382 SlottedFor Cable-Driven SpeedometersFit Fat Bob cable-driven speedometers used on most models from 1947 thru 1995.46345 SlottedSheetmetal16Speedometer/TachometerCombination instruments feature an easy toread 120 MPH speedo face with a solid stateelectronic tachometer. Tachometer reads RPMfrom 12 volt coil output. Single fire ignitions willrequire tach adapter. Sold under license.310418 2240:60 ratio. Fits FL models 1981-1984,FXWG 1984-1986 and Softail ® models1984-1995* with front wheel drive unit.12mm cable fitting . . . . . . . . . . . . .$127.49Light Bulb Socketsfor Fat Bob SpeedometersReplacement bulb sockets with two wires forlarge FL speedos. Sold each.84900 Metal lamp socket . . . . . . . . . . . . . . .$4.1084901 Plastic lamp socket . . . . . . . . . . . . . .$2.80Doss Speedometer Trim RingsWild style and easy installation are combinedin our latest Rick Doss design. Engineered to fitall ‘FL-style’ speedometers on 1968 thru 1996Fat Bob-style tanks with cast dash, and late-modelelectronic speedometer-equipped Softail ® ,FXDWG and Road King ® models. . . . . . . . . .$22.0946176 With visor46177 Without visorMountingHardwareIncludedR DIRick Doss, Inc.Speedometer Mounting Kit andRubber Speedometer DampenerFit all models with cast dashes from 1968 to present.Kit includes rubber dash gasket, two mounting pinswith clips, and two grommets.25965 Complete kit (repl. OEM 67066-76)pack of ten . . . . . . . . . . . . . . . . . . . . . . . . . .$50.9925959 Rubber dampener for Fat Bob speedometerswhen used with a cast dash on Big Twinsfrom 1968 thru 1995(repl. OEM 67115-91) . . . . . . . . . . . . . . . . . .$5.9916.70Prices appearing in this catalog are Suggested Retail Price and are subject to change*

Speedometer AccessoriesApparel310754 310752Bike Kits& Trailers27180Seats& BagsFootControlsHandControls310753 310756Donnie Smith Signature Series Speedometer CoversThese custom covers designed by renowned bike builder Donnie Smithwill give your speedo that “digital” look without the high cost.310752 Fits Big Twin speedos 1968-1994 . . . . . . . . . . . . . . . . . . . . .$23.59310753 Fits Big Twin speedos 1995 to present . . . . . . . . . . . . . . . . .$23.59310754 Fits FXD and XL speedos 1995 to present . . . . . . . . . . . . . .$23.59310756 Fits 21/2"-diameter mini gauges . . . . . . . . . . . . . . . . . . . . . .$19.19LightingElectricalExhaustIntake27131‘Mirage ® ’ Speedometer VisorsChrome-plated visors feature die-cast zinc construction and styling tomatch other Custom Chrome ® Mirage ® accessories. Installs quickly andeasily with the included clear silicone adhesive.27180 Fits all metal-cased instruments on Dyna Glide, FXR and Sportster ®models from 1983 thru 1994 (except Dyna Wide Glide ® models).Sold each . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$17.4927181 Fits all FX models with dual handlebar or tank-mountedinstruments from 1973 thru 1984 (sold in pairs) . . . . . . . . . . . .$30.4927131 Fits large Fat Bob cable-driven speedometers (sold each) . . .$17.4927153 Fits large Fat Bob Original Equipment electronic speedometersas used on Softail ® models from 1996 to present, Road King ®models from 1994 to present and Dyna Wide Glide ® modelsfrom 1995 to present (sold each) . . . . . . . . . . . . . . . . . . . . . . . . . . .$18.5927132 Visor and trim ring. Fits all models with cast dash and cable-drivenor electronic speedometers from 1968 to present . . . . . . . . . .$25.1926707Chrome Speedo/Tach GrillDie-cast cover adds a custom look togauges. Secured with small socketheadset screws. Fits metal-cased speedometersand tachometers on Sportster ® ,FX, FXR and Dyna Glide models from1983 thru 1994 (except Dyna Wide Glide ®models). . . . . . . . . . . . . . . . . . . . . . . . . .$20.9937326 Sold eachEngineGasketsTranny& ClutchDrivelineWheels,Tires& BrakesFrames26706Forks& ShocksSpeedo/TachReplacement Lens forXL and FXR ModelsThis lens replaces cracked, faded, or broken original style speedometer ortachometer lenses and is constructed of an advanced weather resistantmaterial that will not discolor. Installs easily by removing the old lens andsolvent-welding the new lens in place. Fits XL models 1974-1983 and FXRmodels 1982-early 1983.310145 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$7.99Premium ® Mounting GasketsFoam rubber mounting gaskets are direct replacements for stock gasketsfor metal-cased instruments on Sportster ® , FX, FXR and Dyna Glide modelsfrom 1983 thru 1994. Sold each.26706 With visor (repl. OEM 67039-83) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$10.4926707 Without visor (repl. OEM 67104-83) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$7.89SheetmetalGeneralFor the Dealer Nearest You, Call: 800-729-333216.71CrossReference

Dakota Digital SpeedometersDakota Digital HLY-5000 X and X-M Bar Mount SystemHere’s the latest from one of the leaders in digital instrumentation. Designed for custom applications, this revolutionary speedometer system can bemounted either above or below the handlebars, or can easily be attached directly to the triple trees with either a flat or 35° triple tree mount, giving youthree options instead of just one. The high contrast teal display makes the vacuum fluorescent speedometer and quick response bar graphing tachometereasy to read, even on bright days. Along with the odometer, it has a trip odometer making it easy to keep up with the miles on your weekend rides. Thespeedometer is easily calibrated to 255MPH (KPH available) and is available for either electronic or cable drive applications. This highly functional speedois encased in a chrome housing adding a little more shine to your scooter. Dakota Digital thinks so much of this little unit they backed it with a 2-yearmanufacturer’s warranty. Mounting hardware sold separately.Dimensions: 61/2” x 2” x 13/4” (depth)310644 MPH speedometer/tachometer* . . . . . . . . . . . .$474.29310645 KPH speedometer/tachometer* . . . . . . . . . . . . .$474.29Mounting Brackets310659 Chrome bar mounting bracket 11/4" . . . . . . . . . .$92.99310660 Chrome bar mounting bracket 11/2" . . . . . . . . . .$97.54310646 Chrome bar mounting bracket 1" . . . . . . . . . . . .$89.99310647 Chrome flat triple tree mounting bracket . . . .$97.54310648 Chrome 35° triple tree mounting bracket . . . .$101.89Sender Units310649 Adapter for 1996-up electronictransmission sender . . . . . . . . . . . . . . . . . . . . . . . . . .$25.99310652 Sender unit for cable driven speedos . . . . . . . . .$43.99310654 Sender unit inductive pick-up sensor reads chainsprocket teeth . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$71.24*Note: #310644 and #310645 require the purchase of the appropriatesender for proper operation.310644310646310646310644310647310644310858310859Sheetmetal16Dakota Digital Mini SpeedometerAdjustable 0-255 MPH mini speedometer mounts in a 21/16" opening.Contains both odometer and trip odometer. Requires the purchase ofappropriate sender for proper operation. Senders listed in our full-linecatalog.310858 21/16" Speedometer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$270.69Dakota Digital Mini TachometerReadouts display RPM with 0-18,000 RPM range with 10 RPM resolutionbelow 10,000 RPMs and 100 RPM resolution above 10,000 RPMs. High RPMrecall. Adjustable from 1-15 cylinders. Mounts in a 21/16” opening.310859 21/16" Tachometer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$270.6916.72Prices appearing in this catalog are Suggested Retail Price and are subject to change*

Auto Meter Speedometers & TachsApparel45050Bike Kits& Trailers45052Seats& BagsFootControlsAuto Meter ® Tachometers with Chrome Housings25/8" and 33/8"-diameter electronic tachometers feature precision air-coreneedle movements that are stable and accurate to 8,000 RPM. They are allhoused in chrome cases with your choice of black, white or silver faceplates, and work with single or dual fire ignitions. . . . . . . . .$307.99 to $331.79HandControlsLighting33/8"-Diameter45065 Black face45066 White face45067 Silver face25/8"-Diameter45073 Black face45076 White face4505145053ElectricalExhaust45064Intake45054EngineAuto Meter ® Electronic SpeedometersFinally, Programmable Speedometers built tough enough to bear thePro-Cycle name. The unmatched Auto Meter style, along with the benefitsfrom the years of Auto Meter’s racing experience, puts these units ahead ofthe rest. They will work with any speed sensor as well as Harley-Davidson ®transmissions with electronic speed sensors. The bezels and cases have abrilliant chrome finish with a choice of black, white, or silver faces.Fluorescent red pointers round out the Auto Meter style. Look for thesefeatures and more from the Pro-Cycle Electronic Speedometers:• Easy, push-button recalibration while driving• Million mile LCD odometer with resettable trip odometer• Easy installation with only three wires• Available in 120 mph or 160 mph configurations• Quality chrome finish on bezels and 33⁄4" cases• 5" models fit into a 45⁄8" opening. 33⁄4" models fit into most aftermarketbillet aluminum gauge mounts33/4" Speedometers45088 120mph, black face .$364.0945089 120mph, white face $364.0945090 120mph, silver face .$364.0945091 160mph, black face .$364.0945092 160mph, white face $364.0945093 160mph, silver face .$364.095" Speedometers45094 120mph, black face .$368.7945095 120mph, white face $368.7945096 160mph, black face .$368.7945097 160mph, white face $368.79Accessories45064 Shock strap . . . . . . . . . .$21.3945078 Cover for 5" gauges .$38.6945078Auto Meter ® Electronic TachometersAvailable with 33/4" and 5" faces in three models – standard tach, memorytach and tach with a shift-light. Memory tach records highest RPM attainedwhich can be displayed by pushing the ‘recall’ switch. ‘Shift-light’ tach hasan amber light that comes on when the adjustable predetermined RPM isreached. All tachometers use a precision air-core needle movement foraccuracy and stability. They will function on dual-fire or single-fire ignitionsystems (will not work with magneto ignition).45050 33/4"-diameter 8,000 RPM tachometer . . . . . . . . . . . . . . . . . . . .$300.0945051 5"-diameter 10,000 RPM tachometer . . . . . . . . . . . . . . . . . . . . .$338.5945052 5"-diameter 10,000 RPM tachometer with ‘shift light’ . . . . .$364.9945053 33/4"-diameter 8,000 RPM memory tachometer . . . . . . . . . . .$434.3945054 5"-diameter 10,000 RPM memory tachometer . . . . . . . . . . . . .$446.69Accessories and Replacement Parts45078 Cover for 5"-diameter gauges . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$38.6945061 Replacement black anodized mounting bracket for tach . . . .$60.4945064 Replacement shock strap . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$21.39For the Dealer Nearest You, Call: 800-729-3332Auto Meter ® Fat Tach This specially-designed tachometerfeatures a 5"-diameter electro-luminescentdial that glowsat night. Features an adjustabledimmer, adjust-able shift light,chrome housing and a see-thrurain cover. Uses a precision aircoreneedle movement for accuracyand stability. . . . . . . .$396.9942375 5"-diameter tach16.73GasketsTranny& ClutchDrivelineWheels,Tires& BrakesFramesForks& ShocksSheetmetalGeneralCrossReference

Speedometers & Tachometers27800Electronic and MechanicalTachometers are available!45070450712782045056Sheetmetal16Mini GaugesThese gauges feature chrome cases withpolished stainless steel bezels, strongchrome steel mounts, rubber mounthandlebar clamps, accurate non-fluctuatingindicators and 12-volt dial lights.They measure 25/8"-wide x 21/16"-deep.Durable housings are water and vibration-resistant.The speedometers requirecables with 12mm threaded nuts.Speedometers ONLYThe 1:1 ratio units fit 4-speed FL and FXmodels with transmission-driven speedometersfrom 1968 thru 1983. The 2:1 ratio unitsfit 1954 thru 1972 Sportster ® and K models,and FL models with transmission speedometerdrives from 1947 thru 1967. They alsofit Sportster ® , FX and FXR models with frontwheel speedometer drives from 1973 thru1990 (except Softail ® and 4-speed FXWGmodels). The 2240:60 ratio unit will fitSoftail ® and 4-speed FXWG models from1984 thru 1990, and 4-speed FL models withfront wheel speedometer drives from 1981thru 1984. It may also be installed on Softail ®models from 1991 thru 1995 if the self-cancellingturn signal feature is forfeited.310690 2240:60 ratio with MPH face . .$49.9927800 1:1 ratio with 140 MPH face . . .$48.4927810 2:1 ratio with 140 MPH face . . .$49.99310417 2:1 ratio with 180 KM/H face . .$45.49Speedometer Kits with CablesThese kits feature the same high-qualityspeedometers listed above, and include aspeedometer cable to facilitate installation.310434 2240:60 ratio with MPH face forSoftail ® and 4-speed FXWG modelsfrom 1984 thru 1990, and 4-speedFL models with front wheel speedometerdrives from 1981 thru 1984.May also be installed on Softail ®models from 1991 thru 1995 if theself-cancelling turn signal featureis forfeited . . . . . . . . . . . . . . . . . . .$63.4927860 2:1 ratio with MPH face for Sportster ®and K models from 1954 thru 1972,and FL models with transmissionspeedometer drives from 1947thru 1967 . . . . . . . . . . . . . . . . . . . .$61.9927861 2:1 ratio for Sportster ® , FX andFXR models with front wheelspeedometer drives from 1973thru 1990 . . . . . . . . . . . . . . . . . . . .$61.9927862 1:1 ratio for 4-speed FL andFX models with transmissiondrivenspeedometers from1968 thru 1983 . . . . . . . . . . . . . . .$61.992780527807Speedometers with Resettable OdometersThe 2:1 ratio units fit 1954 thru 1972 Sportster ® and Kmodels, and FL models with transmission speedometerdrives from 1947 thru 1967. They also fit Sportster ® , FXand FXR models with front wheel speedometer drivesfrom 1973 thru 1990 (except Softail ® and 4-speedFXWG models). The 2240:60 ratio unit will fit Softail ®and 4-speed FXWG models from 1984 thru 1990, and4-speed FL models with front wheel speedometerdrives from 1981 thru 1984. It may also be installed onSoftail ® models from 1991 thru 1995 if the self-cancellingturn signal feature is forfeited.310718 2240:60 ratio with 160 MPH face . . . . .$52.9927805 2:1 ratio with 140 MPH face . . . . . . . . . .$54.4927807 2:1 ratio with 180 KM/H face . . . . . . . . .$54.49Tachometers ONLY27820 2:1 ratio for all models with mechanicaltachometers . . . . . . . . . . . . . . . . . . . . . . . . .$45.2927821 Electronic tachometer for most modelsfrom 1973 to present . . . . . . . . . . . . . . . .$70.49Tachometer Kit with CableThis kit features the same high-quality tachometerlisted above, and includes a tachometer cable tofacilitate installation.27863 2:1 ratio for all models with mechanicaltachometers . . . . . . . . . . . . . . . . . . . . . . . .$58.19Replacement Parts16041 Handlebar gauge clamp . . . . . . . . . . . . . .$6.4927823 12-volt bulb (twist type) box of 10 . . . .$1.25 ea27824 12-volt bulb (push-in type)box of 10 . . . . . . . . . . . . . . . . . . . . . . . . . . . .$1.25 ea27852 Black vinyl speedometer cablefor CC #27862 (53"-long) . . . . . . . . . . . .$16.9419084 Black vinyl speedometer cable for CC #’s 27860and 27861 (381/2"-long) . . . . . . . . . . . . .$15.49310464 Black vinyl speedometer cablefor CC #310434 (381/2"-long) . . . . . . . . . .$9.49310497 Braided steel speedometer cablefor CC #310434 (381/2"-long) . . . . . . . . .$21.4945057Auto Meter ® RPM-ActivatedShift LightsOperate independently of your tachometer andwill work with either dual or single fire ignitionsystems (will not work with magneto ignition).Bright amber light is illuminated when theengine RPM reaches a predetermined point.The shift-point setting is determined by insertinga pre-calibrated RPM ‘pill’ module into theunit. The pill modules are available in 200 RPMincrements.45070 Mini Shift Light (order RPM moduleseparately) . . . . . . . . . . . . . . . . . . . . .$76.4945056 Pro Shift Light with mount (orderRPM module separately) . . . . . . .$156.8945071 RPM activation module (use withCC #’s 45070 and 45056) . . . . . . .$146.5945057 5,000 to 5,800 RPM pill kit . . . . . .$45.29310738 5600-6400 RPM. RPM pill kit . . .$45.2945058 6,000 to 6,800 RPM pill kit . . . . . .$45.2945059 7,000 to 7,800 RPM pill kit . . . . . .$45.2945060 8,000 to 8,800 RPM pill kit . . . . . .$45.29Dyna Shift Minder SystemFeatures billet aluminum, black and gold finishedhousing and trim, extended bulb life withbuilt-in check feature, and precise solid stateelectronics in the control module. With triggeringaccuracy to within 1%, it is adjustable toany of 64 settings in increments of 125 rpm. Thecontrol module is available separately for use asan engine speed activated switch for air shiftersor nitrous injection systems.60779 Control module ONLY . . . . . . . . .$220.0060780 Shift Minder system w/shift lightfor all twin cylinder models . . . .$326.0016.74Prices appearing in this catalog are Suggested Retail Price and are subject to change*

Speedometers & TachometersApparelBike Kits& Trailers606110Seats& Bags310426FootControlsHandControlsSpeedometer for 1973-1984 Style310425 Speedo with early style face. Fits FXmodels 1973-1984 (except FXWG, FXST,and FXR models) and 1973 XL models.Replaces OEM 67020-73 . . . . . . . .$55.99310426 Speedo with Late-Style face. Fits FX models1973-1984 (except FXWG, FXST, andFXR models) and 1973 XL models.Replaces OEM 67020-73B . . . . . . .$54.49Note: 1974-1975 FX models will require rewiring from stockstator drive system to new coil drive system.310235310425Electronic Mini Gauges by D&SPerformance/VDO ®The same high-performance accuracy found inall VDO gauges, now available through D&SPerformance in a mini size. Feature polishedstainless steel housings with backlit faces andlighted pointers. There is even a single-fireignition option for the tachometer. Made in theUSA to fit most aftermarket 25/8" gaugemounts.23131 Mini tachometer . . . . . . . . . . . . . . . . .$147.7923134 Mini speedometer . . . . . . . . . . . . . . .$157.6423132 Mounting kit for stock handlebar risers onSportster ® , FX, FXR, Softail ® and DynaGlide models from 1974 thru 1995 . .$42.2423133 Tachometer adapter for use with D&SElectronic Tachometer and single fireignitions and coils . . . . . . . . . . . . . . . . .$22.9927825 VDO replacement bulbs (pack of 4) .$7.99606111Cycle Opts Riser SetsThese chromed, billet aluminum risers are theones to choose when fighting the instrumentmounting blues on 11/4"-diameter handlebars.They utilize Dakota Digital 21/16" mini speedometersand tachometer for a perfect match(CC #’s 310858 and 310859). Risers are availablein a straight pullback design or a bullet-shapeddesign with a 6" pullback and a 33/4" rise. Thespeedometer and tachometer function switchesare located on the backsides of the risers justbelow the handlebars for a clean, custom look.Fit 11/4" handlebars ONLY. . . . . . . . . . . . . . .$349.99606110 Straight riser set606111 Bullet riser setNote: Mini speedometers not includedLightingElectricalExhaustIntakeEngineSpeedometerfor XL and FXRModels 1974-1983Original style replacementspeedo and tach for XL andFXR models 1974-1983. . . . . . . . . . . . . . . . . . .$92.14310235 Speedometer. Fits XL models 1974-1983and FXR models 1982-early 1983.Replaces OEM 67020-75D2782721/2" Mini Instrument KitsDesigned around our popular 21/2" diameter mini gauges, these kitsinclude instrument, chrome mounting bracket (without visor), chromegauge cup, rubber grommet and hardware. Available for most Big Twinand Sportster ® models from 1973 to present. An optional mountingbracket with visor is also available.Instrument Kits310300 Speedometer, 2:1 MPH . . . . . . . . . . . .$57.49310302 Speedometer, 2240:60 MPH . . . . . . . .$65.21310301 Speedometer, 2:1 KPH . . . . . . . . . . . . .$57.49310304 Tachometer, coil driven . . . . . . . . . . . .$86.32Replacement Parts310231 Single instrument bracket . . . . . . . . . .$10.99310217 Rubber grommet . . . . . . . . . . . . . . . . . .$3.49310201 Chrome cup, cable drive . . . . . . . . . . . .$9.49310202 Chrome cup, electric drive . . . . . . . . . . .$9.49310304GasketsTranny& ClutchDrivelineWheels,Tires& BrakesSingle Instrument MiniGauge KitsMounts on the stock handlebar topclamp/riser. Ideal for FXWG and FXSTmodels without factory tachometer orcustom speedo applications. Kits comecomplete with instrument, mountingbracket and necessary hardware.VDO ® Electronic Tachometer310228 Speedometer kit. Fits FX and XL models 1973-up8000 rpm tachometer is small enough to fit mostwith front wheel drive units . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$67.99in-dash fairings. Also works great in custom310226 Tachometer kit (coil driven) for all models with 12 volt system . . . . . . . . . . . . . . . . . . . . . . .$81.49applications. Measures 21/16"-diameter. . .$135.4927827 Sold each310225 Bracket only (works with most mini gauges) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$15.49310464 Replacement black vinyl speedometer cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$9.49For the Dealer Nearest You, Call: 800-729-333216.75310226310228FramesForks& ShocksSheetmetalGeneralCrossReference

Speedometers & Tachometers2781827817Sheetmetal16278152781427811VDO ® Electronic SpeedometersAll speedometers feature 120 MPH27813faces with LCD odometers (except27808CC #27811), and can be perfectlycalibrated for just about any drivetraincombination using the stocksending unit for electronic speedometersor the custom VDO ® sender.Different styles are available with33/8" or 4-diameter faces, and theyall utilize an outer threaded retainingring for secure installation in custom dash panels.33/8"-Diameter Speedometers27818 Heritage Gold with 120 MPH face . . . . . . . . . .$190.9927817 Cockpit White with 120 MPH face . . . . . . . . . .$179.9927816 Series 1 with 120 MPH face (not shown)similar to Vision series but with chromebezel and white needle . . . . . . . . . . . . . . . . . . . .$179.9927815 Cockpit Royale with 120 MPH face . . . . . . . . . .$190.9927813 Vision with 120 MPH face . . . . . . . . . . . . . . . . . .$179.9927811 Cockpit with 160 MPH face . . . . . . . . . . . . . . . . .$177.6927808 Domed lens with 120 MPH white face . . . . . .$189.994"-Diameter Speedometers27814 Vision with 120 MPH face . . . . . . . . . . . . . . . . . .$203.99Accessories and Replacement Parts27809 Amp connector, plugs into speedometers . . . . .$7.7927822 Custom mounting kit . . . . . . . . . . . . . . . . . . . . . . .$17.7927812 Custom sending unit . . . . . . . . . . . . . . . . . . . . . . . .$75.4927826 Wiring kit (includes terminals) . . . . . . . . . . . . . . .$18.6927825 VDO replacement bulbs (pack of 4) . . . . . . . . . . .$7.99RevTech ® Computerized Tachometer/Speedometerwith Multi-Function DisplayWhy have a separate speedo, tach, shift light, and stop watch when one unit will do itall! Built-in microprocessor chip gives you complete control through a single button.Speed, odometer and trip odometer displays in MPH or KPH. Works with OriginalEquipment and aftermarket electronic speedo sensors. Includes wiring harness and usermanual. Fits Original Equipment and aftermarket tachometer mounts for 1983 thru 1994gauges, although we recommend the use of the mounts listed below. . . . . . . . . . .$647.49Note: If installing these units on pre-1995 models not equipped with electronic speedometer sensors, we recommendthe use of a CC #49209 sensor unit which installs on the rear axle and picks up the signal for thespeedometer from the rear pulley/sprocket bolts.Digital Display Features:• Speed• Odometer• Trip odometer• Acceleration times (0-60 and standing start 1/4 mile)Unit Features:• Built-in 3-stage programmable shift lights• Low voltage warning• Switchable backlight with user set intensity• Tach uses stepper motor drive for high accuracy and definition• Peak recall42081 White face42080 Black faceBillet Handlebar Clamp Gauge Mounts by Yankee EngineuityAmerican made polished billet mounts are specifically designed for use with RevTech ®Computerized Tachometer/Speedometers. Available flat for pullback risers and angledfor straight risers on 31/2" centers. All brackets include an additional hole for the resetbutton and are available with or without indicator lamps.36396 Flat without indicator lights . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$304.9936393 35° with indicator lights . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$329.99Digital Speedometer by MSBThis beautiful digital speedometer mounts on the leftside of the rear cam cover. There are four control lightsintegrated in the polished aluminum casing of this instrument.Its features include trip and riding time on the illuminateddisplays. You can easily program all functionswhile the instrument keeps mounted. . . . . . . . . . . . .$359.5986885 Speedometer kit16.76Prices appearing in this catalog are Suggested Retail Price and are subject to change*

Speedometers & TachometersApparelSigma Sport‘Targa’ ComputerThe Sport Targa computerfeatures:• Speed up to300kmh/183mph• Trip distance accurateto 10 m / 0.01 mile• Average speed• Actual speed• Maximum speed sincelast reset• Total distance up to99999 km / miles• Stopwatch with auto start/stop function• Clock, mph = 12 h, km/h = 24 hIt comes in a silver waterproof metal/plastic housing withbracket, cable, sensor, magnet with casing (for assembly onspokes) and three O-rings to mount the computer and sensor.Front wheel sizes are adjustable by mm steps. Odometer isresettable after battery change. Uses a 1.5-volt battery typeSR44 (D357) and measures 11,6 x 5,4mm. . . . . . . . . . . . . .$49.5986202 Sigma ‘Sport Targa’ cycle computer26720 26721Tachometer andSpeedometerQuality instruments for FXmodels with handlebarmountedinstruments from1973 thru 1982, and FXmodels with tank-mountedinstruments from 1977 thru1984 (except FXWG, FXST). The120mph speedometer has a lightsocket, dash gasket and a mounting bracket. The tachometer includes a dash gasket anda mounting bracket. The speedometer requires a cable with a 16mm threaded nut.26720 Electronic tachometer (repl. OEM 92042-78A) . . . . . . . . . . . . . . . . . . . . . . . . . . . .$70.2926721 Speedometer (repl. OEM 67020-73B) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$61.99310424310436Bike Kits& TrailersSeats& BagsFootControlsHandControlsLightingElectricalExhaustIntakeSigma Sport MiniSpeedo UnitThis high-quality digitalspeedometer by Sigma Sport isin fact, a bicycle unit, which canbe adapted for motor-cycle use,and can be used in either milesor kilometers mode. Multi-function,it keeps track of speed, distance,and time. Unit is not lighted, uses onetype SR44 watch battery. . . . . . . . . . . . . . . . . . . . . . . .$28.09310316 Sold each*Note: Speed sensor adapter required when using CC #310316 with stocktransmission sender.1984-1993 Style Speedometer and TachometerOriginal equipment style replacement instruments for Big Twin and Sportster ® modelsfrom 1984 thru 1993. The speedometers feature 10 to 120 MPH faces and come completewith dual light bulbs and sockets, wiring and mounting gasket. Available for handlebaror tank-mounted applications.Speedometers310424 Fits 1984 thru 1993 FX, FXR and Sportster ® models with riser mounted gauges,rear reset knob and self canceling turn signals (repl. OEM 67016-86A) . . . . . .$76.74310427 Fits 1984 thru 1993 FX, FXR and Sportster ® models with riser mounted gaugesand rear reset knob (repl. OEM 67037-85A) . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$99.99Tachometers310436 Fits 1984 thru 1993 FX, FXR and Sportster ® models with riser mounted gauges(repl. OEMs 67111-85 and 67042-83) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$96.99EngineGasketsTranny& ClutchDriveline26705Wheels,Tires& Brakes26708FramesSigma Bike Computer Illumination LightIllumination light kit for all types of bike computers on themarket. It mounts on the handlebar beside the computerwithout any tools. Features a waterproof plastic housing witha mounting O-ring and 3-volt battery (type CR2032). . . .$18.8986203 Sigma bike computer Illumination lightHandlebar-Mounted Tachometer KitKit includes our Premium ® tachometer, chrome gauge-mounting bracket with visor andchrome instrument cup. Complete with gasket, spacers and chrome buttonhead hardware.Fits models with short or straight risers.26708 Complete kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$199.99Premium ® Tachometer6200 RPM tachometer is a direct replacement for the Original Equipment parton Sportster ® models from 1985 thru 1993. It may also be installed on Sportster ®and Big Twin models from 1983 thru 1993.26705 Premium ® tachometer (repl. OEM 67111-85) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$145.9919100 Chrome tachometer cover (repl. OEM 67112-83) . . . . . . . . . . . . . . . . . . . . . . . . . . . .$18.96For the Dealer Nearest You, Call: 800-729-333216.77Forks& ShocksSheetmetalGeneralCrossReference

Speedometers & Tachometers686337686340Sheetmetal16MMB ‘Micro Mini’Electronic SpeedometersLatest technology, made in Europe.The smallest speedometers (48mm)on the market with analog displayfor speed readout and an LCD displayto display time, total or trip distance.Available with blue or whiteillumination on your choice of blackor white faces, and simple to operate.Only available with 0-220 km/hfaces. To be used in OEM-applicationsas well as in aftermarket installations(with RevTech ® 5-speed and6-speed transmissions).686336 White face with white illumination for OEM hall sensor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$159.90686811 White face with blue illumination for OEM hall sensor . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Call for price686335 Black face with white illumination for OEM hall sensor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$159.90686812 Black face with blue illumination for OEM hall sensor . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Call for price686343 White face with white illumination for OEM reed sensor (sensor sold separately) . . . . . . .$159.90686813 White face with blue illumination for OEM reed sensor (sensor sold separately) . . . .Call for price686342 Black face with white illumination for OEM reed sensor (sensor sold separately) . . . . . . . .$159.90686814 Black face with blue illumination for OEM reed sensor (sensor sold separately) . . . . .Call for price686338 White face with white illumination, brackets, and ABS plastic cover(hall and reed sensor) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$169.90686806 White face with blue illumination, brackets, and ABS plastic cover(hall and reed sensor) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Call for price686337 Black face with white illumination, brackets and ABS plastic cover(hall and reed sensor) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$169.90686807 Black face with blue illumination, brackets and ABS plastic cover(hall and reed sensor) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Call for price686339 Black face with white illumination, cover, brackets, and push buttons . . . . . . . . . . . . . . . . . .$225.00686810 Black face with blue illumination, cover, brackets, and push buttons . . . . . . . . . . . . . . .Call for price686340 White face with white illumination, cover, brackets, and push buttons . . . . . . . . . . . . . . . . . .$225.00686809 White face with blue illumination, cover, brackets, and push buttons . . . . . . . . . . . . . . .Call for price686341 Reed sensor with 3 magnets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$104.09All speedometers listedabove are available inkilometer per hour only.686340MMB ’Micro Mini’Electronic TachometersThis innovative design made in Europe, and isthe perfect match to our micro speedometers.These are the smallest tachometers on the marketat just 48mm in diameter, and are availablein 8000 RPM or 12000 RPM versions, and all ofthem come with chrome housings and blue illumination.. . . . . . . . . . . . . . . . . . . . . . . . . . .Call for price686815 8000 RPM white face/single fire ignitions686816 8000 RPM white face/dual fire ignitions686817 12000 RPM black face/single fire ignitions686818 12000 RPM white face/dual fire ignitions686819 12000 RPM black face/dual fire ignitionsPolished Billet Housingfor 48mm MMB Speedos by MWThis cup works in conjunction with all of ourMW gauge brackets and mounts (CC #’s 686801thru 686804 and 86299 thru 86302). It accommodatesthe two button switches... one of which isthe set switch and the other is the operationswitch for the electronic speedometer. The simple2-wire hookup exits the housing at the bottomrear. The set switch resides in the bottom ofthe gauge cup conforming to its bullet shape,while the operation switch is located on theright-side of the cup, facing the rider.686800 Gauge cup ONLY (sold each) .Call for price686000 Stainless steel button switchwith 2-wires (sold each) . . . . .Call for price686001 Stainless steel button switchwith 1-wire (sold each) . . . . . .Call for price16.78Prices appearing in this catalog are Suggested Retail Price and are subject to change*

Speedometers & TachometersApparelBike Kits& TrailersSeats& BagsFootControlsMMB ’Micro Mini’ Electronic TachometersThe smallest electronic tachometer gauges available on the market. Thesetachs feature a diameter of only 1.9" (48mm), scale up to 8,000 RPM or12,000 RPM and a 12-volt dial light. The perfect match to our ‘Micro Mini’speedometers which can be found on page 16.82. They fit most models andinclude a mounting bracket. Available with chrome-plated or black-coatedhousings. Sold each. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$112.99MMB ’Micro Mini’ Tachometers for Single-Fire IgnitionsAll of the same features as the standard ‘Micro Mini’ tachometers butnow available for single-fire applications. These tachometers eliminatethe need to connect a tachometer interface between the tachometerand the ignition module. Sold each. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$119.99For Standard IgnitionsChrome BlackFace Plated CoatedBlack *27467 86021White *85025 86175Aluminum 86177 8617686062 Replacement bulb, 12V1.2W (sold each) . .$4.99* Reads to 12000 RPMFor Single-Fire IgnitionsChrome BlackFace Plated CoatedBlack 86025 86024White 86027 86026Aluminum 86023 8602286062 Replacement bulb, 12V1.2W (sold each) . .$4.99HandControlsLightingElectricalExhaustChromeBlackRatio Face Plated Coated1:1 Black MPH 27471 . . .$100.89 n/a1:1 Black KM/H 27470 . . .$100.89 n/a1:1 White KM/H 84821 . . .$100.89 n/a2:1 Black MPH 27473 . . .$100.89 n/a2:1 Black KM/H 27472 . . .$100.89 86030 . . .$108.992:1 White KM/H 84820 . . .$100.89 86166 . . .$108.992:1 Aluminum KM/H 86167 . . .$101.79 86029 . . .$108.992240:60 Black MPH 27474 . . .$100.89 n/a2240:60 Black KM/H 27469 . . . .$85.49 n/a86062 Replacement bulb, 12V 1.2W (sold each) . . . . . . . . . . . . . . . .$4.99MMB ’Micro Mini’ Cable-Driven SpeedometersThese high-quality units are made in Europe and are the smallest speedometers on the market at only 1.9" (48mm) in diameter. They’re available withbrushed aluminum, black or white faces with chrome-plated or black-coated housings, and have resettable odometers. The MPH speedometers have facesthat read from 0-120 MPH, and the KP/H speedometers read from 0-220 KP/H.Applications1:1 Ratio Fit 4-speed FL and FX models with transmission-driven speedometers from 1968 thru 1983.2:1 Ratio Fit FL models with transmission-driven speedometers from 1947 thru 1967, and Sportster ® , FX and FXR models with front wheel speedometer drivesfrom 1973 thru 1990 (except Softail ® and 4-speed FXWG models). May also be installed on Sportster ® , FXR and Dyna Glide models with front wheeldrive speedometers from 1991 thru 1994 if the self-canceling turn signal feature is forfeited.2240:60 Fit all Softail ® and 4-speed FXWG models from 1984 thru 1990, and 4-speed FL models with front wheel speedometer drives from 1981 thru 1984.May also be installed on models from 1991 thru 1995 if the self-canceling turn signal feature is forfeited.IntakeEngineGasketsTranny& ClutchDrivelineWheels,Tires& BrakesFramesForks& ShocksSheetmetalGeneralFor the Dealer Nearest You, Call: 800-729-333216.79CrossReference

Speedometers & Tachometers’Micro Mini’ Indicator Light UnitsOnly 1.9" (48mm) in diameter for bikes without dash panels or stock indicator lights. They’re available with square symbols and black or white face or withround symbols and black face and housing. They feature high beam, oil pressure, turn signal, and neutral lights. Include mounting brackets.Face Chrome Plated Black CoatedBlack 84829 . . . . . . . . . . . . . . . . . . . . .$82.39 86028 . . . . . . . . . . . . . . . . . . . . .$90.49White 84830 . . . . . . . . . . . . . . . . . . . . .$82.39 86174 . . . . . . . . . . . . . . . . . . . . .$90.49Sheetmetal16Custom Cable-Driven Mini SpeedometersCustom mini speedos with 60mm cases, made in Germany. They’re availablewith chrome-plated or black-coated housings, and include a 12-volt bulband mounting bracket. Other options include a black, white or aluminumKM/H face and a variety of drive ratios.Applications1:1 Ratio Fit 4-speed FL and FX models with transmission-driven speedometersfrom 1968 thru 1983.2:1 Ratio Fit FL models with transmission-driven speedometers from 1947thru 1967, and Sportster ® , FX and FXR models with front wheelspeedometer drives from 1973 thru 1990 (except Softail ® and4-speed FXWG models). May also be installed on Sportster ® , FXRand Dyna Glide models with front wheel drive speedometersfrom 1991 thru 1994 if the self-cancelling turn signal feature isforfeited.Speedometer Reset KnobsThese chrome reset knobs feature knurled edges foreasy adjustment and come with mounting screw.Fits Softail ® models from 1990 thru 1995.310365 Sold each(repl. OEMs 67215-89 and 67117-85) . . . . . . .$3.49Fits dash mounted speedometer onFXR 1986-1993, FXRS 1988-1992,FXSB & FXEF 1985 only andDyna Glides 1991-1992.310367 Bag of 10(replaces OEM 67122-85) . . . . . . . . . . . . . . . . . .$21.4916.80310367310365Prices appearing in this catalog are Suggested Retail Price and are subject to change*ChromeBlackRatio Face Plated Coated1:1 Black KM/H 84824 . . . .$95.59 n/a1:1 White KM/H 84827 . . . .$95.59 n/a2:1 Black KM/H 84823 . . . .$95.59 86170 . . .$103.692:1 White KM/H 84826 . . . .$95.59 86171 . . .$103.692:1 Aluminum KM/H 86034 . . .$103.69 86033 . . .$103.6986062 Replacement bulb, 12V 1.2W (sold each) . . . . . . . . . . . . . . . .$4.99310643 2240:60 ratio with tachometer. Fits FL models 1981-1984, FXWG1984-1986 and Softail ® models 1984-1995* with front wheel driveunit. 12mm cable fitting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$124.99Chrome GaugeCover SetMatched set of full-coveragechrome speedometerand tachometer covers.Slips easily over the stockinstrument housing anduses existing hardwarewithout modification.19090 Tach and speedo cover set for the steel-cased instruments onSportster ® , FX and FXR models 1984 thru 1990 . . . . . . . . . . . . . .$34.4919097 Fits the steel-cased speedometers on FX, FXR and Sportster ® modelsfrom 1983 thru 1990 (repl. OEMs 67090-85 and 67105-83) . . .$16.9919100 Fits the steel-cased tachometers on FX, FXR and Sportster ® modelsfrom 1984 thru 1994 (repl. OEMs 67092-85 and 67112-83) . . .$18.96

Gauge MountsApparel65510Bike Kits& TrailersSeats& Bags655091024610247FootControlsT-Bar ’Micro Mini’ Gauge Mounts by Pro-One Chrome billet mounts provide clean installation of 48mm (17/8") ‘MicroMini’ speedos and tachs. Available smooth or drilled for 2 indicator lights.Fits T-Bars with 31/2" riser-to-riser centers.HandControlsSingle Gauge65509 Fits 1" or 11/4" diameter bars . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$74.9565511 With 2 light holes, fits 1" or 11/4" diameter bars . . . . . . . . . . . . .$74.9565515 With 2 light holes, fits 11/2" diameter bars . . . . . . . . . . . . . . . . . . .$74.951024810249LightingDual Gauge65510 Fits 1" or 11/4" diameter bars . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$79.9565512 With 2 light holes, fits 1" or 11/4" diameter bars . . . . . . . . . . . . .$79.9565514 Fits 11/2" diameter bars . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$79.9565516 With 2 light holes, fits 11/2" diameter bars . . . . . . . . . . . . . . . . . . .$79.951025010251ElectricalExhaustIntakeGauge Adaptor Bracketfor T-Bars by AccutronixMade of chrome-plated billet aluminum and designed to mount theelectronic gauge brackets from 1995 to present Dyna Glide and Sportster ®models to custom T-bars. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$97.8544583 Fits all 11/4"-diameter T-bars that have 31/2"-centersNote: Not for use with 883C or 1200C Sportster ® models.Gauge Mounts for 11/4" T-BarsChrome-plated billet aluminum gauge mounts for T-Bars with 31/2" risercenters. Designed to be used with the Original Equipment gauges usedfrom 1983 to present, and most mini gauges measuring 25/8" in diameter.The mounts for 1995 and later gauges also come with chrome cups.For 1983 thru 1994 Original Equipment Gauges10248 Single gauge . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$90.6910249 Dual gauge . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$96.49For 1995-Up Original Equipment Electronic Gauges10250 Single gauge . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$153.3910251 Dual gauge . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$221.79For 25/8"-Diameter Mini Gauges10246 Single gauge . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$79.9910247 Dual gauge . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$82.94EngineGasketsTranny& ClutchDrivelineChrome Gauge Mounts for T-Barsby ‘50’s Boy’Single or dual, mini or Original Equipment gauges,and with or without holes for indicator lamps. Theyfit most models with 1" or 11/4"-diameter T-bars.Wheels,Tires& BrakesFramesMounts for 1"-Diameter T-Bars36425 Dual gauge mount without indicator lampholes for Original Equipment oil pressureand voltmeter gauges . . . . . . . . . . . . . . .$203.99Forks& Shocks36428GaugeCupsMounts for 11/4"-Diameter T-Bars36428 Single gauge mount without lamp holesfor 25/8" mini gauges . . . . . . . . . . . . . . . .$186.99Gauge Cups for ‘50's Boy’ Mounts18049 Standard-style for 25/8"-diametercable-driven mini gauges . . . . . . . . . . . . .$85.9936516 Teardrop-style for 25/8"-diametercable-driven mini gauges . . . . . . . . . . . . .$98.49SheetmetalGeneralFor the Dealer Nearest You, Call: 800-729-333216.81CrossReference

Mix & Match Gauge Mounts604011 604010 604008604012 604007 604016604003 604005 604015 604009604001604002 604004Chrome Gauge Mounts and Handlebar Clampsby Yankee EngineuityNow you can mix and match to your desire of style with theseAmerican-made mounts.• Allows you to use existing hardware and stock-style indicator lamps• Chrome-plated for the ultimate gleaming look• Handlebar gauge mount clamps feature engraved vertical grooves andare available ‘flat’ for pullback risers and in a 35º angle for straight riserson 31/2" centers• Come with or without holes for indicator lamps or light bar• Mix and match gauge mounts and clampsGauge MountsGauge Mounts for 17/8" Micro Speedometers and/or Tachometers604001 Single mount . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$112.22604002 Dual mount . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$120.46Gauge Mounts for 25/8" Micro Speedometers and/or Tachometers604003 Single mount . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$110.49604004 Dual mount . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$120.46604043604045604046604047Sheetmetal16Gauge Mounts for 27/8" Micro Speedometers and/or Tachometers604005 Single mount . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$112.22604006 Dual mount . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$120.46Gauge Mounts for 33/8" OEM Speedometers and/or Tachometers for Modelsfrom 1995 to Present and 33/8" VDO and Autometer Gauges604007 Single mount . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$116.91604008 Dual mount . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$143.69Gauge Mounts for OEM Speedos and/or Tachs for Models from 1978 thru 1994604009 Single mount . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$116.91604010 Dual mount . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$143.69Gauge Mount for 33/8" OEM Speedometers, Tachometers, VDO or Autometerfor Models from 1995 to Present and 17/8" Micro Tachs or Speedos604011 Dual mount . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$141.63Gauge Mount for Single RevTech ® Tachometer/Speedometer (CC #’s 42080 or 42081)604012 Single mount . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$116.91Gauge Mounts for Road King ® Models from 1994 to present. Mount to Handlebar ClampCover. Hardware and Template Included.604013 Single mount for 17/8" micro speedo or tach . . . . . . . . . . . . . . . .$112.22604014 Single mount for 25/8" mini speedo or tach . . . . . . . . . . . . . . . . .$112.22604015 Single mount for 27/8" autometer tach . . . . . . . . . . . . . . . . . . . . .$112.22604016 Single mount for 33/8" OEM mount from 1995 to presentand autometer tach and VDO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$116.91604042604041Chrome Gauge Cups604041 Fits 17/8" micro mini mechanical speedometeror tachometer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$100.43604042 Fits 17/8" mini electronic speedometer, tachometeror micro mini indicator light units . . . . . . . . . . . . . . . . . . . . . . . . . .$100.43604043 Fits 25/8" custom mini mechanical speedometeror tachometer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$109.70604044 Fits 25/8" custom mini electrical speedometeror tachometer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$109.70604045 Fits 33/8" VDO electronic speedometers . . . . . . . . . . . . . . . . . . . . .$153.42604046 Fits 33/8" OEM electronic speedometer or tachometerfrom 1995 to present . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$138.54604047 Fits RevTech ® computerized tachometer/speedometerwith multi function (CC #’s 42080 or 42081) . . . . . . . . . . . . . . . .$133.3916.82Prices appearing in this catalog are Suggested Retail Price and are subject to change*

Mix & Match Gauge MountsApparelGauge MountsBike Kits& TrailersFor your own unique look!Seats& BagsChrome Handlebar Gauge Mount Clamps35º Handlebar Gauge Mount Clamps for Most Models from 1974 to Presentwith OEM-Style Riser (except Touring, Springer Softail ® and Deuce Models)604021 Mount clamp without indicator light holes . . . . . . . . . . . . . . . . . .$87.04604022 Mount clamp with 5 indicator molded-in LED light bar . . . . .$236.39604024 Mount clamp with 4 indicator light holes . . . . . . . . . . . . . . . . . . . .$87.04604025 Mount clamp with 5 indicator light holes . . . . . . . . . . . . . . . . . . . .$87.04604026 Mount clamp with 5 slotted indicator light holesfor OEM light bars from 1995 to present . . . . . . . . . . . . . . . . . . . .$89.87604011FootControlsHandControlsLighting35º Handlebar Gauge Mount Clamps for Softail ® Deuce Models from 2000 to Present604027 Mount clamp without indicator light holes . . . . . . . . . . . . . . . . . .$87.0435º Handlebar Gauge Mount Clamps for Springer Softail ® Models from 1988 to Present604028 Mount clamp without indicator light holes . . . . . . . . . . . . . . . . . .$89.87604029 Mount clamp with 5 indicator light holes . . . . . . . . . . . . . . . . . . . .$89.87ElectricalFlat Handlebar Gauge Mount Clamps for All Models with 1" Aftermarket T-Bars604031 Mount clamp without indicator light holes . . . . . . . . . . . . . . . . .$121.49Flat Handlebar Gauge Mount Clamps for All Models with 11/4" Aftermarket T-Bars604032 Mount clamp without indicator light holes . . . . . . . . . . . . . . . . .$121.49604021ExhaustFlat Handlebar Gauge Mount Clamps for Most Models from 1974 to Presentwith OEM-Style Riser (except Touring, Springer Softail ® and Deuce Models)604033 Mount clamp without indicator light holes . . . . . . . . . . . . . . . . . .$87.04604034 Mount clamp with 5 indicator molded-in LED light bar . . . . .$236.39604035 Mount clamp with 4 indicator light holes . . . . . . . . . . . . . . . . . . . .$87.04604036 Mount clamp with 5 indicator light holes . . . . . . . . . . . . . . . . . . . .$87.04604037 Mount clamp with 5 slotted indicator light holesfor OEM light bars from 1995 to present . . . . . . . . . . . . . . . . . . . .$87.04604031604007IntakeEngineGaskets604037 604025 604036604026Tranny& Clutch604022 604024 604035604002Driveline604027 604026 604034Wheels,Tires& BrakesFrames604028 604021 604033604022Forks& ShocksSheetmetalGeneralFor the Dealer Nearest You, Call: 800-729-333216.83CrossReference

MW Gauge Mounts686802686801Sheetmetal16686803686804Polished Handlebar Gauge Mounts by MWThese unique polished aluminum gauge holders work with all 1" handlebarsand custom risers with 2-piece top clamps, to hold our popular 48mm‘Micro Mini’ speedometers and tachometers (see pages 16.78 and 16.79).However, the risers must be at least 2"-tall to provide the necessary clearancebetween the triple tree and the bottom of the gauge mount.Available in four different designs which can be combined with our 48mmgauge cups, and 1983 thru 1991-style indicator lamps (CC #’s 26368 thru26371) can be used on some versions. Made in Germany.686801 Single gauge bracket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Call for Price686802 Single gauge bracket with holes for indicator lamps . . . . .Call for Price686803 Dual gauge bracket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Call for Price686804 Dual gauge bracket with holes for indicator lamps . . . . . .Call for PriceGauge Cups for 48mm ‘Micro Mini’ Gauges86303 With cable hole for mechanical speedometers . . . . . . . . . . . . . . . .$86.69686800 Without cable hole for electronic speedometers . . . . . . . . .Call for Price86310 Without cable hole for electronic tachometers . . . . . . . . . . . . . . .$86.69Indicator LampsShipped with 6"-long leads that are not terminated but include OriginalEquipment-style terminals. Sold each.26368 Green (replaces OEM 68574-86) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$9.4926369 Red (replaces OEM 68489-86) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$9.4926370 Amber (replaces OEM 67864-86) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$9.4926371 Blue (replaces OEM 67862-86) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$9.4913217 Replacement speed nuts to fit lamps (pack of 10) . . . . . . . . . . . . . .$3.99MW ‘Micro Mini’ Gauge Mounts for T-BarsPolished aluminum gauge mounts that install on 1"-diameter T-Bars with31/2" centers, and designed to use our 1.9"-diameter (48mm) ‘Micro Mini’gauges (which can be found on pages 16.80 thru 16.82). The brackets areO-ringed where they attach to the handlebars to absorb vibration, and youcan reuse your 1983 thru 1995 Original Equipment indicator lamps or purchasenew ones (CC #’s 26368 thru 26371 – see elsewhere on this page).Gauge cups are available separately. Made in Germany.86304 Single gauge bracket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$258.6986305 Single gauge bracket with holes for indicator lamps . . . . . . . . .$280.6986306 Dual gauge bracket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$322.4986307 Dual gauge bracket with holes for indicator lamps . . . . . . . . . .$337.89Gauge Cups for 48mm ‘Micro Mini’ Gauges86303 With cable hole for mechanical speedometers . . . . . . . . . . . . . . . .$86.69686800 Without cable hole for electronic speedometers . . . . . . . .Call for Price86310 Without cable hole for electronic tachometers . . . . . . . . . . . . . . .$86.69Billet Housing for 48mm MMB Speedos by MWThis polished cup works in conjunction with all of our MW gauge bracketsand mounts (CC #’s 686801 thru 686804 and 86299 thru 86302). It accommodatesthe two button switches... one of which is the set switch and theother is the operation switch for the electronic speedometer. The simple2-wire hookup exits the housing at the bottom rear. The set switch residesin the bottom of the gauge cup conforming to its bullet shape, while theoperation switch is located on the right-side of the cup, facing the rider.686800 Gauge cup ONLY (sold each) . . . . . . . . . . . . . . . . . . . . . . . . . . .Call for Price686000 Stainless steel button switch with 2-wires (sold each) . . . . . . . . .$57.29686001 Stainless steel button switch with 1-wire (sold each) . . . . . . . . . .$74.3916.84Prices appearing in this catalog are Suggested Retail Price and are subject to change*

857798629186292857788578185783857778578086293 86294 8629586299862968629786300 86301863028578286298MW Gauge Mounts85748MW Handlebar Gauge Mounting Bracketswith Digital SpeedometersPolished aluminum gauge mounts with integrated digitalspeedometer units that mount to 1"-diameter handlebars.These mounting brackets are available with a digital speedoonly, or to use with 1.9"-diameter (48mm) ‘Micro Mini’tachometers (which can be found on page 16.81), as well aswith our 33/4" and 5"-diameter Auto Meter tachometers(which can be found on page 16.75). Factory indicator lampscan be reused from 1983 thru 1991. Each kit includes adigital speedo and stainless steel screws (tachometers arenot included). Made in Germany.85780 Handlebar clamp with digital speedo only . . .$286.1985781 Handlebar clamp with digital speedoand holes for indicator lamps . . . . . . . . . . . . . . . .$274.9985782 Handlebar clamp with digital speedofor Micro Mini tachometers . . . . . . . . . . . . . . . . .$332.3985783 Handlebar clamp with digital speedofor Micro Mini tachometers and holesfor indicator lamps . . . . . . . . . . . . . . . . . . . . . . . . . .$357.6985748 Handlebar clamp with digital speedofor 33/4" Auto Meter tachometers . . . . . . . . . . .$310.9985777 Handlebar clamp with digital speedofor 33/4" Auto Meter tachometers andholes for indicator lamps . . . . . . . . . . . . . . . . . . . .$319.8985778 Handlebar clamp with digital speedofor 5" Auto Meter tachometers . . . . . . . . . . . . . .$310.9985779 Handlebar clamp with digital speedofor 5" Auto Meter tachometers and holesfor indicator lamps . . . . . . . . . . . . . . . . . . . . . . . . . .$378.5986291 Handlebar clamp with digital speedofor 25/8" Auto Meter tachometers andholes for indicator lights . . . . . . . . . . . . . . . . . . . .$484.1986292 Handlebar clamp with digital speedofor 25/8" Auto Meter tachometers . . . . . . . . . . .$414.89Note: Speedometer works with wire wheels only.MW Billet Aluminum RisersFits perfectly in combination with MW handlebar gaugemounting brackets listed above. 2.36"-tall CNC machinedand polished finish. Made in Germany.85784 Pullback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$206.8986309 Pan Am . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$271.79Top Clamp Gauge Mounts and Tach BracketsHandlebar top clamps with or without digital speedometersand the ability to add single or dual gauge brackets for ourMicro Mini gauges. The top clamps with the flat fronts, canaccept any of the four gauge brackets listed below.86293 Top clamp with digital speedo only . . . . . . . . . .$298.2986294 Top clamp with digital speedo and holesfor indicator lamps . . . . . . . . . . . . . . . . . . . . . . . . . .$308.1986295 Top clamp with digital speedo and flat frontedge for separate tach bracket mounting . . . .$316.9986296 Top clamp with digital speedo and flat frontedge for separate tach bracket mountingand holes for indicator lamps . . . . . . . . . . . . . . . .$326.8986297 Top clamp only with flat front edgefor separate tach bracket mounting . . . . . . . . .$182.6986298 Top clamp only with flat front edgefor separate tach bracket mountingand holes for indicator lamps . . . . . . . . . . . . . . . .$192.5986299 Single gauge bracket for Micro Mini tachsto use with CC #’s 86295 thru 86298 . . . . . . . . .$104.8986300 40° angled single gauge bracket for Micro Minitachs to use with CC #’s 86295 thru 86298 . . . . .$86.5986301 Dual gauge bracket for Micro Mini tachsto use with CC #’s 86295 thru 86298 . . . . . . . . .$113.3986302 40° angled dual gauge bracket for Micro Minitachs to use with CC #’s 86295 thru 86298 . . . . .$96.69Gauge Cups for Micro Mini Gauges86303 With cable hole for speedos . . . . . . . . . . . . . . . . . .$86.69686800 Without cable hole for electronicspeedos . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Call for price86310 Without cable hole for tachs . . . . . . . . . . . . . . . . .$86.69ApparelBike Kits& TrailersSeats& BagsFootControlsHandControlsLightingElectricalExhaustIntakeEngineGasketsTranny& ClutchDrivelineWheels,Tires& BrakesFramesForks& ShocksSheetmetalGeneralFor the Dealer Nearest You, Call: 800-729-333216.85CrossReference

Gauge Mounts37461190941909937462’Boob’ Gauge Mounts and Cups for T-Barsby Carlini DesignNever be lonely again! Chrome billet gauge mounts and ’Boob’ instrumentcups fit most large diameter T-bars. Accepts the electronic gauges for modelsfrom 1995 to present.For 11/4" T-Bars37460 Single gauge . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$214.9537461 Dual gauge . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$339.95For 11/2" T-Bars37462 Single gauge . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$214.9537463 Dual gauge . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$339.95Chrome Solo Gauge MountsChromed steel, instrument brackets upgrade the standard black finishedbracket on all single instrument models. Fit FX, FXR and Sportster ® modelsfrom 1983 thru 1991. Looks great when combined with CC #19097 chromegauge cover.19094 Visored bracket for Sportster ® and FXR models (exceptFXLR and Super Glide ® models) from 1986 thru 1991(repl. OEM 67053-86) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$24.4919099 Stock replacement bracket for FXE and Sportster ® models with asingle gauge from 1983 thru 1985 (repl. OEM 67053-83T) . . . . .$20.09089810898208983with08982SheetmetalPolished Aluminum Handlebar Clamps and Gauge Mountsby Yankee EngineuityThese ball milled clamps are CNC-machined from billet aluminum and available with or without alate-model indicator light bar provision. They fit most risers from 1973 to present, and are designedto be combined with the gauge mounts listed below.08981 Without indicator provision . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$75.9908982 With indicator light bar provision (indicator light bar OEM 68789-96 not included) . . . . .$87.49Gauge MountsDesigned exclusively for CC #’s 08981 or 08982 handlebar clamps to mount the gauges at a 35º angle.The dual gauge mount accepts all aftermarket 25/8"-diameter mini gauges.08983 Dual gauge . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$190.991616.86Prices appearing in this catalog are Suggested Retail Price and are subject to change*

Gauge MountsApparel45081450804508345082Bike Kits& Trailers4506945068Seats& Bags4508645087 4508542380 42381Lightweight Mounting Brackets for Auto Meter ® GaugesPolished aluminum brackets are ideal for mounting Auto Meter ® tachometers and speedometerson the top clamps of a wide variety of models from 1973 to present.For 33/8" Dual Gauges42380 Fits 11/4" T-bars . . . . . . . . . . . . . . . . .$134.9942381 Fits 1" T-bars . . . . . . . . . . . . . . . . . . .$134.99For 25/8" Mini Gauges45080 Angled mount . . . . . . . . . . . . . . . . . . .$79.9945081 Flat mount . . . . . . . . . . . . . . . . . . . . . .$74.9945083 Fits Springer Softail ® models . . . . .$86.9945085 Fits 1" T-bars . . . . . . . . . . . . . . . . . . . .$87.9945087 Fits 11/4" T-bars . . . . . . . . . . . . . . . . . .$87.99For 33/4" and 5" GaugesAuto Meter 33/4" tachs and speedos have thesame cup size as the 5" gauges, so the samebrackets can be used.45068 Angled mount . . . . . . . . . . . . . . . . . . .$89.9945069 Flat mount . . . . . . . . . . . . . . . . . . . . . .$84.9945082 Fits Springer Softail ® models . . . . .$96.9945084 Fits 1" T-bars . . . . . . . . . . . . . . . . . . . .$98.9945086 Fits 11/4" T-bars . . . . . . . . . . . . . . . . . .$98.9945078 5" nylon gauge cover . . . . . . . . . . . .$38.69Indicator LampsThese indicator lamps fit most models 1983 thru1991 and are available in four different colors.They’re shipped with 6"-long leads that are notterminated but include Original Equipment-styleterminals. Also for most handlebar gaugemounting brackets. Sold each.26368 Green (replaces OEM 68574-86) . . .$9.4926369 Red (replaces OEM 68489-86) . . . . .$9.4926370 Amber (replaces OEM 67864-86) . .$9.4926371 Blue (replaces OEM 67862-86) . . . . .$9.4913217 Replacement speed nuts to fit lamps(pack of 10) . . . . . . . . . . . . . . . . . . . . . .$3.99FootControlsHandControlsLightingElectricalExhaustIntake05665Engine05724Gaskets0566405723Ness-Tech ® Chrome T-Bar Gauge MountsBillet aluminum gauge mounts feature contemporary styling. They’re available in different versionsfor most mini gauges, or the Original Equipment gauges used on most models from 1983 thru 1994.They can be installed on 1" or 11/4"-diameter T-bars with 31/2" riser centers.Mounts for 25/8" Mini Gauges05723 Single mount for 1" T-bars . . . . . . .$74.9505724 Dual mount for 1" T-bars . . . . . . . .$79.9505962 Single mount for 11/4" T-bars . . . . .$74.9505963 Dual mount for 11/4" T-bars . . . . . .$79.95Mounts for 17/8" Mini Gauges05310 Single mount for 11/4" T-bars . . . . .$74.9505311 Dual mount for 11/4" T-bars . . . . . .$79.95Mounts for Original Equipment Gauges05665 Single mount for 1" T-bars . . . . . . .$79.9505312 Single mount for 11/4" T-bars . . . . .$79.9505664 Dual mount for 1" T-bars . . . . . . . .$84.9505314 Dual mount for 11/4" T-bars . . . . . .$84.95Indicator Lamps with SymbolsThese are Original Equipment parts. Used onmost models from 1994 to present and featureprinted symbols on the lenses. Great for stockreplacement or custom applications. Each lampcomes with 6"-long leads with speed nut andwill fit most aftermarket gauge mounts also(except MW mounts). Sold each. . . . . . . . . . .$17.3985593 Red, oil pressure (repl. OEM 68022-92)85595 Green, turn signal (repl. OEM 68021-92)85597 Blue, high-beam (repl. OEM 68023-92)85599 Green, neutral switch (repl. OEM 68024-92)Tranny& ClutchDrivelineWheels,Tires& BrakesFramesForks& ShocksSheetmetalGeneralFor the Dealer Nearest You, Call: 800-729-333216.87CrossReference

Speedometer Accessories310370Billet Aluminum Speed SensorUpgrade the stock plastic transmission speedsensor with this billet beauty. Add some styleto your speed. Fits all Big Twin models from1996 to present. . . . . . . . . . . . . . . . . . . . . . . . . . .$59.9949208 Replaces OEMs 74420-94, 74437-96)Adapter Device forMW Digital SpeedometersDesigned to use all MW handlebar clamps withdigital speedo on all models from 1995 to presentwith electronic driven speedometer. Justplug onto the sensor and connect the leads tothe speedo. Useful also when changing yourrear wheel diameter or belt pulley. This deviceworks with the most of the digital speedometerson the market as well. . . . . . . . . . . . . . . . . . .$226.6985786 Adapter deviceRubber Speedo Cable BootFits all models with front wheel speedometerdrive units. Also fits many models using upperboot. Replaces OEM 66996-85T. Sold each.310370 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$4.99TachometerBlock-Off Plugfor Sportster ® ModelsChrome plug fits Sportster ® models from 1957thru 1984.500430 Sold each . . . . . . . . . . . . . . . . . . . . . . . .$13.99Sheetmetal16Electronic Speedo Sending UnitOriginal Equipment sensor for all stock 5-speedBig Twin transmissions 1996 to present. Also fitsRevTech ® 5-speed Big Twin transmissions (exceptRevTech ® 5-speed in a 4-speed case). . . . . .$79.9975090 Replaces OEM 74437-96Electronic SpeedometerRecalibration UnitThis unit recalibrates the pulses from the sendingunit so the speedometer will read correctly.The unit plugs in line between the pickup sensorand the speedometer using factory plugs. It fitsall models from 1994 to present with electronicspeedometers. CC #58318 is recommended whenany of our RevTech ® 6-speed or 5-speed gearsets are used in combination with the stock OEMelectronic speedometer. . . . . . . . . . . . . . . . . .$109.9958318 Speedometer recalibration unit16.88Billet Aluminum Rear WheelSpeed SensorThis rear wheel speed sensor is made from polishedaluminum and clamps to the left rear axlespacer and ‘counts’ the pulley bolts to provide a‘pulse’ for programmable VDO electronicspeedometers. . . . . . . . . . . . . . . . . . . . . . . . . . . .$99.9949209 Custom rear wheel sensorSpeedometer Sensor Coverby Alley Custom MotorcyclesMade of chrome-plated aluminum to cover theelectronic sensor on top of the transmission. FitsSoftail ® models from 1996 to present, Road King ®models from 1994 to present, and Dyna Glidemodels from 1995 to present. . . . . . . . . . . . . .$22.0919193 Sold eachPrices appearing in this catalog are Suggested Retail Price and are subject to change*Antique Speedometer KnobsReproduction of the thin stem odometer resetknob for Big Twin speedometers. Ideal for steeltwo-light, three-light or Cateye dashes. . .$22.9925964 Bag of ten2597425958Speedometer Knobs and ScrewsChrome knurled knob and screw sets for largedash-mounted Fat Bob speedometers. Sold inpacks of 10.25958 Fits all Softail ® models 1990 to present(replaces OEM 67215-89) . . . . . . .$33.7925974 Fits all 4-speed Big Twins and Softail ®models from 1968 thru 1989 (replacesOEMs 67215-68, 67217-68) . . . . . .$30.99

Sheetmetal16Speedometer Cables & AccessoriesSpeedometer and Tachometer CablesFront Wheel Speedometer CablesFits all FX 1973 thru 1985 (except FXWG, FXST);1984 thru 1992 FXRS (except Sport Edition,Convertible, FXRT and Low Rider ® models withtank-mounted instruments); XLH and XLCH1973 only; XLX 1983 thru 1985 and XLH 1984thru 1985. Also fits Sportster ® models from1986 thru 2003 (replaces OEMs 67051-73,67052-78A) 401/4"19082 Black vinyl . . . . . . . . . . . . . . . . . . . . . . .$15.4913573 Stainless steel . . . . . . . . . . . . . . . . . . . .$23.54Fits 1983 thru 1985 XLS; 1984 thru 1993 FXRTand FXRS Sport Edition or Convertible models;1973 thru 1985 FX (except FXWG, FXST) with2" to 4" over stock length forks (replacesOEM 67054-83) 46"19083 Black vinyl . . . . . . . . . . . . . . . . . . . . . . .$15.4913575 Stainless steel . . . . . . . . . . . . . . . . . . . .$25.54Fits all front wheel driven CC mini-speedosand mini-speedo kits. Also fits XLH and XLCH1974-1983 and 1984 thru 1993 FXWG, FXSTand FXSTC (replaces OEMs 67051-74, 67024-84and 67038-84) 381/2"19084 Black vinyl . . . . . . . . . . . . . . . . . . . . . . .$15.4913571 Stainless steel . . . . . . . . . . . . . . . . . . . .$22.74Fits 1982-1983 FXR and 1979-1982 XLS plus anyof the applications for CC #19084 with 2" to 4"over stock length forks, including CC mini gauges(replaces OEM 67060-79A) 40"19085 Black vinyl . . . . . . . . . . . . . . . . . . . . . . .$15.4913577 Stainless steel . . . . . . . . . . . . . . . . . . . .$27.69Fits same applications, including CC mini gauges,as CC #19084 but for use on bikes with 6" to 8"over stock length forks 471/2"27851 Black vinyl . . . . . . . . . . . . . . . . . . . . . . .$14.5413578 Stainless steel . . . . . . . . . . . . . . . . . . . .$30.49Fits FLT and FLHT models from 1980 thru 1986(replaces OEM 67072-79) 381/4"27920 Black vinyl . . . . . . . . . . . . . . . . . . . . . . .$17.99Fits FL model 1937-61 (repl. OEM 67026-37) 36"14697 Black vinyl . . . . . . . . . . . . . . . . . . . . . . .$14.19Fits XLH 1973/1984-85, XLCH 1973, XLX 1983-85,XR100 1983-84, FX 1973-78, FXB 1980-82, FXE1973-84, FXEF 1979-84, FXR/FXLR 1986-94, FXRS1984-87, FXS 1977-84, FXSB 1983-85 (repl. OEMs67078-85A, 67052-78A and 67051-73) 40"14662 Black vinyl . . . . . . . . . . . . . . . . . . . . . . .$11.9914689 Stainless steel . . . . . . . . . . . . . . . . . . . .$25.39Fits XLX/XLCH 1970-72, (repl. OEM 67051-70) 44"14702 Black vinyl . . . . . . . . . . . . . . . . . . . . . . .$11.29Front Wheel Speedo Cables Cont.Fits FLHT/FLHTC/FLHTP 1986 (repl. OEM 67060-86A) 441/2"14674 Black vinyl . . . . . . . . . . . . . . . . . . . . . . .$14.99Fits XLH883/883DLX/883 Hugger ® 1991-94,XLH1200 1993-94, XLS late 1984-85, FLHT/FLTC/FLTCU/FLTCUI 1996 to present, FXRS Conv.1990-94, FXRS-SP 1987-93, FXRT 1985 (repl.OEMs 67060-96 and 67063-89) 41"14723 Black vinyl . . . . . . . . . . . . . . . . . . . . . . .$21.1914795 Stainless steel . . . . . . . . . . . . . . . . . . . .$39.64FXEF 1985 (repl. OEM 67077-84 and 67077-85) 36"14686 Black vinyl . . . . . . . . . . . . . . . . . . . . . . .$11.29Fits FL models 1981-84, FLHS 1987-94 FLST 1986-90, FLSTC 1987-95, FLSTF 1990-95, FLSTN 1993-95,FLTC 1987-91, FLTCU 1989-95 FLTCUI 1996, FXDB-D 1992, FXDB-S 1991, FXDC 1992, FXDL 1993-94,FXRS 1988-92 (repl. OEMs 67079-86A, 67186-88,67072-87A/B and 67026-81) 35"19165 Black vinyl . . . . . . . . . . . . . . . . . . . . . . .$15.49Fits all models with 2:1 ratio speedometer andfront wheel drive, 1984 thru 1995 FXWG/FXST(repl. OEM 78083-84) 421/2"14684 Black vinyl . . . . . . . . . . . . . . . . . . . . . . .$14.99Transmission Drive Speedometer Cables27852 Fits all transmission-drivenCC mini speedometers andmini-speedo kits 53" . . . . . . . . . . . . .$16.9413588 Stainless, fits all transmission-drivenCC mini speedometers andmini-speedo kits 53" . . . . . . . . . . . . .$30.4914671 Fits FLS, XL models with mini gaugeand transmission drivespeedometer, 53" . . . . . . . . . . . . . . . .$11.2914693 Fits FLS, XL models with mini gauge,transmission drive, 471/2" . . . . . . . .$12.4914694 Stainless, fits FLS, XL models with minigauge, transmission drive, 471/2" .$30.4914695 Chrome, fits FLS, XL models with minigauge, transmission drive, 471/2" .$17.6914664 Fits XL w/Fat Bob tanks 1954-72,FL/FLH 1962-80, FXWG 1980-83, FX1971-75 w/transmission drive (repl.OEM 67026-62) 36" . . . . . . . . . . . . . .$11.2919086 Fits all 1962-1980 FL models, 1971-1972FX models and 1980-1983 FXWGs, as wellas 1954-1972 Sportster ® models whenusing CC #25575 one-piece Fat Bob tank.Can be used with any of CC’s large dashmounted1:1 speedometers(repl. OEM 67026-62) 351/8" . . . . . .$15.49Speedometer Extension3" extension helps clear brake calipers and eliminatekinks. Speedo rubber boot sold separate.59111 3" speedo extension . . . . . . . . . . . . . .$7.1959116 5" speedo rubber boot . . . . . . . . . .$13.39Tachometer CablesFits all XL 1974-1980 and FL 1961-1969 withdistributor drive. Also fits CC #’s 27820 and27863 mini tachometers and mini-tach kits(replaces OEMs 92065-74T, 92062-65A) 32"27850 Black vinyl . . . . . . . . . . . . . . . . . . . . . . .$15.4913585 Stainless steel . . . . . . . . . . . . . . . . . . . .$22.29Custom Front WheelSpeedometer CablesUnique cables that permit you to combine anyof our large 2:1 ratio Fat Bob speedometers withfront wheel speedometer drive units. Each cableis complete with two cable-to-speedo head nuts,and a specially-designed flared cable end to fiteither the FL (5/8"-18 large coarse thread) or1982-up (16 x 1.0mm) metal cased speedometersfitted to Sportster ® , FX and FXR models.BLACKSTAINLESSLENGTH VINYL STEEL381/2" 19081 . .$64.59 n/a421/2" 19095 . .$28.79 13564 . .$30.49Choke CablesReplacement black vinyl choke cables.14700 Fits XL 1988-91, FLST/FXST 1990-97, FLHT1990-97, FXRS/T 1990-92, FXDL/FXDWG1993-97, FLHR 1994-97, FLHT 1995-97, FX1995-97 (repl. OEMs 29236-90, 29229-88A,29229-88) . . . . . . . . . . . . . . . . . . . . . . . . $9.9414722 Fits FLTC 1980-89, FLHT 1983-87, FXRS1982-89, FLHTC 1983-89, FLHTCU 1989,FLHS 1987-89, FXRP 1984-88, FLHTP1984-88, FLT 1980-83, FXRC 1985/87,FXRD 1986, FXRDG 1984, FXLR 1987-89,FXR 1982-83/86-89, FXRS-SP 1985-89,FXRT 1983-89 (repl. OEMs 29209-86,29225-79) . . . . . . . . . . . . . . . . . . . . . . . . $9.94Speedometer Cable NutsReplacement speedometer cable nuts310320for Big Twins and Sportsters ® . Handy forcable customers who aren’t sure if theyhave American or metric instrument fittings.Zinc plated. Pack of 5. . . . . .$6.49310485 American nut, 5/8"-18 threads.Fits most large diameter tankmounted speedometers 310323Chrome Clutch Cable End CoversThese die-cast trim pieces cover the unfinished fitting on clutch cables withbrilliant chrome. Die-cast construction with set screw fastener. Sold each.310320 Upper for all models from 1982 to present . . . . . . . . . . . . . . . . . .$16.99310323 Lower for Big Twins (except FXR models) 1987 to present . . . .$18.4916.90Prices appearing in this catalog are Suggested Retail Price and are subject to change*

.375" .600"Speedometer Drive UnitsApparelBike Kits& TrailersSeats& BagsFootControls310388.350"310334Front Wheel Speedometer Drive UnitsChoose from our standard Spare Parts line or our “Pro-Stock” series of speedo drives.SparePro-Stock Parts Fit Informationn/a 310390 Fits FX, FXR, and XL models with 19" front wheel 1973-1983$36.49 (except FXWG). 2.625:1 ratio. Replaces OEM 67127-73HandControlsLighting310331 310387 Fits FL models 1981-1984, FLT and FLHT models 1982-1986. 16" wheel.$39.99 $36.49 2.75:1 ratio. Replaces OEM 67073-81Electricaln/a 310388 Fits FXWG, FXST, and FXSTC models 1984-94 with 21" wheel. 3.0:1 ratio.$36.49 Replaces OEM 67120-84Bn/a 310389 Fits FX, FXR, and XL models 1984-1994 with 19" front wheel. 2.625:1$36.49 ratio. Replaces OEM 67127-84AExhaust310389310334 n/a Fits FXLR 1987-1994. 21" wheel. 3.0:1 ratio. Replaces OEM 67132-85A$39.99Intake.300"2672526726EngineGasketsTranny& Clutch310390310331310387Premium ® Speedometer Drive UnitsStock replacement drive units for all models with front wheel drive speedometers from1973 thru 1998. They work great with our 2-to-1 ratio speedometers.26725 Fits 1973 thru 1983 Sportster ® , FX and FXR models with Narrow Glide19" front wheels (repl. OEM 67127-73) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$39.9926726 Fits 1982 thru 1986 FLT and FLHT models, and 1981 thru 1984 4-speedFL models (repl. OEM 67073-81) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$39.9926723 Fits FXST, FXSTC, Dyna Wide Glide ® and 4-speed FXWG modelswith 21" front wheels from 1984 thru 1995 (repl. OEM 67120-84B) . . . . . . . .$39.9926724 Fits Sportster ® , FX, FXR and Dyna Glide models with Narrow Glide19" front wheels from 1984 thru 1994 (repl. OEM 67127-84A) . . . . . . . . . . . .$39.9926699 Fits FLHT models from 1996 thru 1998 (repl. OEM 67101-96) . . . . . . . . . . . . . .$65.9926727 Fits FLHS and FLHT models from 1987 thru 1995, and FLT modelsfrom 1987 thru 1998 (repl. OEM 67073-87A) . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$39.9926728 Fits FXLR models from 1987 thru 1994 (repl. OEM 67132-85A) . . . . . . . . . . . . .$39.9926729 Fits FL Softail ® models from 1986 thru 1995 (repl. OEM 67125-86A) . . . . . . .$39.9926702 Fits FX Springer models from 1988 thru 1995 (repl. OEM 67166-88) . . . . . . . .$65.99DrivelineWheels,Tires& BrakesFramesForks& ShocksSheetmetalGeneralFor the Dealer Nearest You, Call: 800-729-333216.91CrossReference

Oil Tanks for Softail ModelsSide Fill Oil Tanks for Softail ® ModelsOur great-looking tanks are available chrome-plated or raw steel forcustom paint. They incorporate all the changes from the factory overthe years, and each includes filler plug and all fittings.Rick Doss ‘Winged’ Oil TanksRick has come up with another great design to help you improve thestyling of all 1986 thru 1999 Softail ® models. By filling the gap between thetank and the frame with small ‘Wing’ extensions, the bike has a muchsmoother, integrated look. Made in the USA by Santee ® .12605 Chrome tank for all Softail ® models 1989 thru 1999 . . . . . . . .$279.9912604 Chrome tank for all Softail ® models 1986 thru 1988 . . . . . . . .$279.9913614 Raw steel tank for all Softail ® models 1989 thru 1999 . . . . . .$249.99Santee ® Stock Replacement Oil TankAll the quality features of our Rick Doss tank without the ‘Wings’.Fit all Softail ® models from 1989 thru 1999. Made in the USA.12616 Replaces OEMs 62498-89A and 62498-91 (not shown) . . . . . .$344.99Center Fill Oil Tanksfor Softail ® ModelsWe’ve taken our best-selling oil tanksand moved the filler spout to the centerof the tank under the seat for evensleeker looks. Each tank includes a threaded filler plug and all fittings.‘Winged’ Center Fill Oil TanksSame quality features as our side fill tanks with the ‘Wing’ extensions thatfill the gap between the tank and frame.12613 Chrome tank for all Softail ® models 1989 thru 1999 . . . . . . .$289.9913616 Raw steel tank for all Softail ® models 1989 thru 1999 . . . . . .$259.9913615 Raw steel tank for all Softail ® models 1987 thru 1988 . . . . . .$259.99Stock Replacement Center Fill Oil TankTop-quality tank without the ‘Wings’ (not shown).12617 Chrome tank for all Softail ® models 1989 thru 1999 . . . . . . .$344.9913617 Raw steel tank for all Softail ® models 1989 thru 1999 . . . . . .$239.99Sheetmetal16Side Fill ‘Winged’ Oil Tankfor Softail ® ModelsThis chrome winged oil tank measures 12"-wide(1/2" extra on belt side) and holds 3 quarts. Sidefiller cap included. Uses Original EquipmentSoftail ® mounting brackets. . . . . . . . . . . . . .$336.9980112 Fits Softail ® models from 1984 thru 1999Center Fill ‘Winged’ Oil Tankfor Softail ® ModelsThis oil tank from CC is made using only thehighest quality products. Heavy gauge steel isused to produce a strong, smooth tank with asmooth surface. . . . . . . . . . . . . . . . . . . . . . . . . .$246.68270172 Fits all Softail ® models from 1989thru 1999 (repl. OEM 62498-89A)Billet Oil Tanks for Softail ®and Twin Cam 88 ® Models by ‘SCS’Billet aluminum oil tanks for Softail ® andTwin Cam 88 ® models with decorative ball milledgrooves. Available in two versions, center fill orside fill with old-style or new-style oil lineconnectors.Billet Oil Tanks for StandardSoftail ® Frames86606 Side fill with old-style oil lineconnectors . . . . . . . . . . . . . . . . . . . . . . .$605.2986607 Side fill with new-style oil lineconnectors . . . . . . . . . . . . . . . . . . . . . . .$604.3986608 Center fill with new-style oil lineconnectors . . . . . . . . . . . . . . . . . . . . . . .$600.89Billet Oil Tanks for Twin Cam 88 ® Models86609 Side fill with old-style oil lineconnectors . . . . . . . . . . . . . . . . . . . . . . .$653.6986610 Side fill with new-style oil line connectors. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$653.2916.92Prices appearing in this catalog are Suggested Retail Price and are subject to change*

Oil Tanks for Softail ModelsApparel953269530995312Bike Kits& Trailers95313Seats& Bags95307FootControlsOil Tank for Softail ® ModelsA perfect chrome replacement for the OriginalEquipment oil tank. Fits all Softail ® models from1989 thru 1999. . . . . . . . . . . . . . . . . . . . . . . . . .$149.9978307 Replaces OEM 62498-9195314HandControls9530895310LightingUnpainted Oil Tankfor Softail ® ModelsPerfect for custom painting, this original style oiltank features heavy gauge steel constructionand a built in battery box. May also be used onmost aftermarket Softail ® frames. . . . . . . .$144.49270148 Fits all Softail ® models from 1989 thru1999 (repl. OEM 62498-89A)Raw Steel Custom Oil Tanks by Chopper GuysReady for primer and your own custom paint scheme and featuring your choice of internal or externaloil feed with external ribs, or built-in air cooling tubes, with either standard or ‘winged’ rear edges.These center fill wrap around oil tanks fit Chopper Guys frames and Original Equipment Softail ®models from 1984 thru 1999. They may also be used in custom chassis applications.Note: Stock Softail ® models from 1984 thru 1999 must notched at the frame plate for center fill hole.Internal Feed95307 Cooling ribs with wings . . . . . . . . .$497.8495309 Cooling ribs . . . . . . . . . . . . . . . . . . . .$445.4495311 Air cooled with wings . . . . . . . . . . .$681.2495313 Air cooled . . . . . . . . . . . . . . . . . . . . . .$628.7495320 Smooth stock style . . . . . . . . . . . . . .$337.1495321 Smooth stock style with wings . .$399.9995326 Same as CC #95321 but withtop mounting . . . . . . . . . . . . . . . . . .$409.99External Feed95308 Cooling ribs with wings . . . . . . . . .$497.8495310 Cooling ribs . . . . . . . . . . . . . . . . . . . .$445.4495312 Air cooled with wings . . . . . . . . . . .$681.2495314 Air cooled . . . . . . . . . . . . . . . . . . . . . .$628.7495318 Smooth stock style . . . . . . . . . . . . . .$337.1495322 Smooth stock style with wings . .$389.49ElectricalExhaustIntakeEngineGasketsTranny& ClutchDrivelineOil Tank for Softail ® Modelsby Paul Yaffe OriginalsFormed from 14-gauge steel and tig welded forstrength. Pressure-tested, certified and shippedcomplete with billet filler cap. Weld-on mountinghardware permits a custom fit to manyapplications. . . . . . . . . . . . . . . . . . . . . . . . . . . . .$639.9947766 Raw steel oil tank1200612004Doss ‘Winged’ Oil Tanks for Twin Cam 88 ® Softail ® ModelsThese chrome oil tanks have ‘wing’ extensions at the rear to fill any gaps between the tank and theframe. They also feature a narrower side-to-side profile that follows the frame rails for a more integratedlook. The center fill version has the filler cap hidden under the seat for an even sleeker look.They hold 31/2 quarts and fit all Softail ® models from 2000 to present.12004 Side fill tank . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$299.9912006 Center fill tank . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$306.99Chrome Winged Oil Tanks for Softail ® ModelsOur CC custom oil tank features “winged” extensions to fill the gap betweenframe and oil tank. Heavy gauge steel construction with triple chrome platedfinish. Available for Softail ® models from 1986 thru 1999 as well asmost aftermarket Softail ® style frames.Chrome mounting brackets are available separately. . . .$268.99270160 Fits all Softail ® models from 1989thru 1999 (repl. OEM 62498-89A)270161 Fits all Softail ® models from 1986thru 1988 (repl. OEM 62498-86A)270160Wheels,Tires& BrakesFramesForks& ShocksSheetmetalGeneralFor the Dealer Nearest You, Call: 800-729-333216.93CrossReference

Oil Tanks for Big Twin ModelsSmooth Wraparound Oil Tanks for Big Twin ModelsThese oil tanks install without fabrication and house the stock battery for FXE models. They’re availablein two versions that provide you with the choice of an integrated spin-on oil filter or without.The inner compartments are lined and let you lift out the battery without removing the tank. Theyalso include a convenient drain plug, chrome nipple-type hose fittings and filler caps. Each of thesethree quart oil tanks will fit all 4-speed FL or FX models from 1965-early 1984 (except Softail ® models).Without Spin-On Oil Filter12570 Chrome oil tank . . . . . . . . . . . . . . . .$259.9912575 Black powder painted oil tank . .$245.99With Spin-On Oil Filter12569 Chrome oil tank . . . . . . . . . . . . . . . .$329.9926109 Replacement chrome oil filter . . . . .$8.14Custom ‘Beveled’ Wrap-AroundOil Tank for Big Twin ModelsThis exclusive Custom Chrome ® oil tank featuresan attractive decorative bevel along the upperedge of the tank that tapers as it approachesthe center. The oil line fittings are tucked neatlyout of sight under the tank, and the 31/2 quartcapacity insures plenty of oil for any Big Twinmotor. Each tank comes with a chrome fillerplug and accepts the stock 12-volt FXEbatteries. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$259.9912566 Fits all 4-speed Big Twin models from1965-early 1984 (except Softail ® models)Note In some stock applications it may be necessary to modifyfactory mounting tabsSheetmetalSmooth Wrap-Around Oil Tanksfor Electric Start Big Twinsin Custom Rigid FramesDesigned for use in most custom rigid frames.They can be used with aluminum primaries andelectric starters. These oil tanks will not fitOriginal Equipment rigid frames, and require CC#15204 Battery Plate Brackets to mount fenders.They come complete with a cap andfittings for threaded oil lines.12601 Chrome oil tank . . . . . . . . . . . . . . . .$219.9912573 Black powder painted oil tank . .$219.99Smooth Wrap-Around Oil Tankfor Electric Start Big Twinsin Custom Swingarm Frames5-quart oil tank designed to fit most aftermarketcustom swingarm frames when equipped withelectric start Big Twin engines and 4-speed transmissions.They will accept stock FXE batteries,and require CC #15204 Battery Plate Brackets tosupport rear fenders. Includes a cap and fittingsfor oil lines. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$209.9908932 Chrome oil tankWrap-Around Oil Tanksfor Electric Start Big Twinsin Rigid FramesThese 31/2 quart oil tanks feature built-in batteryboxes that accept stock FXE batteries. They fit allOriginal Equipment rigid frames from 1936 thru1957 and most custom rigid frames with eithersteel or aluminum primaries. Each tank comescomplete with a cap and fittings for threadedoil lines which will accept stock oil lines or ourcustom steel-braided lines.12600 Chrome oil tank . . . . . . . . . . . . . . .$219.9912576 Black powder painted oil tank .$209.991616.94Prices appearing in this catalog are Suggested Retail Price and are subject to change*

Oil Tanks for Big Twin ModelsApparelDiscontinued12585Bike Kits& TrailersSeats& BagsFootControlsOil Tanks for Kickstart Big Twins in Rigid FramesThese custom wrap-around oil tanks have a four-quart capacity and will fit Original Equipment BigTwin rigid frames with tin primaries and kick-start only 1936 thru 1957. There are versions availablewith or without an integrated spin-on oil filter in your choice of finishes. They can also be adapted tomost custom rigid frames. All tanks accept the stock tall 6-volt battery.With Spin-On Oil Filter12585 Chrome side fill oil tank . . . . . . . . .$310.9912577 Black powder painted side filloil tank . . . . . . . . . . . . . . . . . . . . . . . .$299.9926109 Replacement chrome oil filter . . . . .$8.1425543 Replacement black oil filter . . . . . . .$7.04Without Spin-On Oil Filter12603 Chrome side fill oil tank . . . . . . . . .$219.9912580 Black powder painted side filloil tank . . . . . . . . . . . . . . . . . . . . . . . .$209.99Horseshoe Oil Tank for Big TwinsThese 33/4 quart oil tanks fit all 4-speed rigidand swingarm frames (except Softail ® models)with tin primaries but will not work on modelswith aluminum primaries. They have a batteryarea measuring 43/8"-wide and 53/4"-long.Features include easy-fill side spout, an integral‘mousetrap eliminator’ bracket, built-in batterytray and rear fender mount.12571 Chrome oil tank . . . . . . . . . . . . . . . . .$239.9912574 Black powder painted oil tank . . .$229.99HandControlsLightingElectricalExhaust270151IntakeEngineGaskets‘Winged’ Oil Tanksfor Rigid FramesSmall ‘wing’ extensions at the rear of the tankfill any gaps between the rear fender and oiltank. They hold 31/2 quarts and have built-inbattery boxes that accept stock FXE batteries.Available with right side filler neck or smoothlooking center filler to fit all OriginalEquipment rigid frames from 1936 thru 1957and most custom rigid frames with either steelor aluminum primaries. Complete with cap.Accept most stock oil lines or custom steelbraidedlines.12807 Side fill tank . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$347.9912808 Center fill tank . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$353.99612809 Center fill tank Raw . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$129.99Oil Tanks for Rigid FramesChrome original style oil tanks for rigid-framedBig Twins. Available with side or center oil fill.Fits Big Twin models from 1936 thru 1957.Replaces OEM 62504-38. . . . . . . . . . . . . . . . .$148.99270150 Side fill270151 Center fill78305Tranny& ClutchDrivelineWheels,Tires& BrakesFrames78301Chrome Replacement Oil TanksDuplicates of the Original Equipment oil talksfinished in brilliant chrome.78301 Fits 4-speed FL and FX Big Twinmodels from 1982 thru 1986(repl. OEM 62504-82) . . . . . . . . . .$142.9578305 Fits 4-speed FL and FX Big Twinmodels from 1965-early 1982(repl. OEM 62504-65A) . . . . . . . .$129.99Forks& ShocksSheetmetalGeneralFor the Dealer Nearest You, Call: 800-729-333216.95CrossReference

Oil Tanks for Sportster ® & FXR Models125841258112583Polished Aluminum Oil TanksAvailable in 4- and 5-quart tanks or a 5-quart tankwith an integrated spin-on oil filter. Each tankcomes complete with mounting hardware and oilline fittings. We also have an aluminum electricalaccessory box which works well with this style oftank. The 4-quart tank fits late Sportster ® modelsand the 5-quart tank fits Big Twins.12581 4 quart tank – 93/8"-long x55/8"-diameter . . . . . . . . . . . . . . . . . .$231.9912582 5 quart tank – 87/8"-long x61/4"-diameter . . . . . . . . . . . . . . . . . .$243.9912583 5 quart with filter – 87/8"-long x61/4"-diameter . . . . . . . . . . . . . . . . . .$308.9908943 Replacement threaded chromeoil tank cap . . . . . . . . . . . . . . . . . . . . .$14.5912584 Electrical accessory box (measuresapprox. 61/4"-long x 61/4"-tall x27/8"-deep) . . . . . . . . . . . . . . . . . . . . . .$89.9926109 Replacement filter element . . . . . . .$8.1416054 Replacement rubber mounts(5/16"-24 x 3/4" studs on both ends)Pack of 3 . . . . . . . . . . . . . . . . . . . . . . . .$23.14270431 Replacement filter . . . . . . . . . . . . . . .$12.79Wrap-Around Oil Tanks forElectric Start Sportster ® ModelsThese 31/2 quart oil tanks will accept the stockFXE electric start battery. They fit all 1967 thru1978 stock electric start Sportster ® models, andare adaptable to many custom frames (on 1973thru 1978 stock frames, the removal of the rearframe support struts may be required). Theycome complete with a cap, oil line fittings, andmounting hardware.12599 Chrome oil tank . . . . . . . . . . . . . . . .$239.9912586 Black powder painted oil tank . .$229.99Custom Oil Tank Bracketsfor Sportster ® ModelsRequired when mountingoil tanks on custom rigid orswingarm Sportster ® frameswith behind-the-transmissionsingle downtubes. . . . . . . . . . . . . . . . . . . . . . . .$24.4926419 Sold each (2 required)Horseshoe Oil Tanksfor Sportster ® ModelsFeature side-fill spouts for convenience, andhave a capacity of approximately 33/4 quarts.They include a cap, fittings, and all necessaryhardware to mount them to stock 1958 thru1978 Sportster ® frames without a battery (on1973 thru 1978 frames, the removal of the rearframe support struts may be required).12572 Chrome oil tank . . . . . . . . . . . . . . . .$249.9912579 Black powder painted tank . . . . .$239.99Custom Oil Tank Bracketsfor Sportster ® ModelsRequired when mountingoil tanks on custom rigid orswingarm Sportster ® frameswith behind-the-transmissionsingle downtubes. . . . . . . . . . . . . . . . . . . . . . . .$24.4926419 Sold each (2 required)26397270144Sheetmetal16Chrome Oil Tanksfor Sportster ® ModelsGreat looking parts that add a bright splash ofchrome to the right side of Sportster ® models.Accurate reproductions of the Original Equipmentparts, they replace the stock black unitsperfectly. The ideal complement for our chromeignition module and battery covers.12588 Fits Sportster ® models from 1983thru 1993 (repl. OEM 62475-83) . . . .$167.8413628 Fits Sportster ® models from 1994thru 1996 (repl. OEM 62475-94) . . . .$159.99Chrome Oil Tank for FXR ModelsA complete chrome oil tank assembly for all FXRmodels from 1982 thru 1990 (except 1986-upFXR Super Glide ® models). Adds sensational styleand simplifies oil draining through the additionof a second drain hole on the left rear of thetank. Included with the tank is a remote drainhose fitting kit which allows it to be drainedfrom the kickstand side through a rubber hosewhich, when not in use, plugs onto a framemounted dummy fitting which is included in thekit. Machine polished and then triple chromeplated.Replaces OEMs 62406-81, 62406-86 and62414-86.28104 Oil tank and remote drain kit(this tank has no oil level"sight" glass) . . . . . . . . . . . . . . . . .$147.7916051 Well-Nuts ® blind fasteners(repl. OEM 8099) pack of 10 . . . .$13.99Oil Tank Mounting KitsFor Softail ® ModelsIncludes chrome front and rear brackets tomount oil tanks to most aftermarket andOriginal Equipment Softail ® frames.26397 Complete kit . . . . . . . . . . . . . . . . . . . .$28.39270144 Rear bracket only, chrome(replaces OEM 62704-84) . . . . . . . . .$25.99270147 Front bracket only, chrome(replaces OEM 62707-84) . . . . . . . . .$10.99For Rigid ModelsRaw steel offset mounting bracket to mount oiltanks on rigid models. Also works great tomount rear fenders on rigid frames. . . . . . .$7.2921015 Sold each16.96Prices appearing in this catalog are Suggested Retail Price and are subject to change*

Custom Oil Tanks & AccessoriesDue to slight variations in hand crafting these tanks, measurements given may vary slightly.ApparelBike Kits& Trailers10"7"13"Seats& Bags2704722"5"2704755"FootControls27047643/8”10"71/4"270473Stainless Steel Oil Tanks by NacellStainless steel oil tanks for a lifetime of good looks. Will not rust, peel, flake, tarnish or corrode. Moreresistant to scratches and impact damage than aluminum. Hand crafted and Tig welded, then polishedto a lasting mirror finish. Tanks include threaded mounting bosses, and threaded connectors for oilfeed, return, and vent lines. Tanks also include knurled aluminum oil cap with o-ring seal.Note: These tanks are all universal fit for custom applications, mounting brackets must be fabricated. Check all clearances carefully.270472 Octagon . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$429.99270473 Prism . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$429.99270475 Torpedo . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$429.99270476 Teardrop . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$429.995"9"13"71/4"Custom Oil Tank Drain ValveSolid brass construction, then polished andchrome plated. Ball valve with nylon seal constructioninsures long life and smooth operation.Installs in original oil-drain line, open-closeknob has a 1/4 turn movement. Includes built-inmounting tab.500933 Fits Softail® models 1989-up . . . . .$99.99HandControlsLightingElectricalExhaustIntakeAluminum Oil Tank Drain ValvesMade from ‘6061’ aluminum that has been heattreatedto ‘T6’. They permanently replace thestock drain plug and fit all stock or aftermarketoil tanks with 5/8"-18 threads for dramaticallysimpler oil changes. Attach a piece of 1/2" I.D.hose to the spigot and turn counter-clockwisewith a wrench until oil flows into your catchpan. Sold each. . . . . . . . . . . . . . . . . . . . . . . . . . .$31.4918227 Natural finish (shown)18228 Black finishEngineGasketsTranny& ClutchChrome Oil Tank TrimThis extruded, chrome oil tank trim conceals theseams on 4-speed FL and FX models 1965-1986(except FXST) with stock oil tank.Replaces OEM 62534-65.270009 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$15.49500555DrivelineWheels,Tires& BrakesOil Tank Cover Trim Kitfor ‘Touring’ ModelsThis trim rail kit is contoured to match the shapeof the left side (oil tank) cover on FLHT, FLT andFLHS models from 1980 to present. It looks greatand helps prevent paint damage or scurf markscaused by passenger’s boots. Complete withmounting hardware. . . . . . . . . . . . . . . . . . . . . .$15.49Note: installation requires drilling mounting holes in thestock side covers.270008 Left side trim kit (repl. OEM 66053-92)Reinforced Rubber Oil TankMounting Washers by K&N1"-diameter round rubber washers have dozensof uses, in addition to the obvious. Allows cleanscratch-free, well-cushioned installations. Comeson a card of 12 packs of 10. . . . . . . .$5.75 per pack22170 Mounting washersFor the Dealer Nearest You, Call: 800-729-3332Drain Plug Repair KitSpecial oversized drain plug and tap to rethreadstripped-out oil tank and motor casedrain holes with original 1/2"-13 threads.Replacement oversized plugs are also availableseparately.500555 Repair kit . . . . . . . . . . . . . . . . . . . . . . .$37.99500556 Plug only (9/16"-18) . . . . . . . . . . . . . . .$6.7416.97FramesForks& ShocksSheetmetalGeneralCrossReference

Oil Caps & Dipsticks2710127100Chrome Oil Tank DipsticksChrome-plated replacements for Original Equipment dipsticks.27100 With short dipstick for Softail ® models from 1984 to present andSportster ® models from 1982 thru 2003(repl. OEM 62595-82A) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$15.4927101 With long dipstick for FL models from 1970 thru 1984, FX modelsfrom 1971 thru 1985, FXR models from 1982 thru 1983, FLT modelsfrom 1980 thru 1986 and XLCH models from 1970 thru 1978(repl. OEM 62625-70A) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$15.49Chrome Oil Tank Plugs with DipstickChrome-plated replacement oil tank plugs with dipsticks.93914 Fits Dyna Glide models from 1991 to present(repl. OEMs 62681-92A and 62685-95A) . . . . . . . . . . . . . . . . . . . . .$31.3993924 Fits FLT, FLHT, FLHS and Road King ® modelsfrom 1993 to present (repl. OEMs 62640-93and 62607-93) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$29.791605023125Sheetmetal16Aluminum Oil Filler Capby Banke PerformanceMade for Buell ® motorcycles with plastic oiltanks. Keeps dirt and grit out of oil tank andmakes checking oil level easier and faster.Includes screw on cap with brass dipstickand instructions. . . . . . . . . . . . . . . . . . . . . . . . . .$51.5447983 Sold eachChrome Oil Tank Cap AssemblyFor stock oil tanks on all 4-speed Big Twin models(except Softail ® models) thru 1982 and1967-early 1978 Sportster ® models with electricstart.12352 Replaces OEM 62610-52TA . . . . . .$27.4925334 Oil tank gasket 1966-1982 (pack of 10)replaces OEM 62628-66 . . . . . . . . . .$9.4916.98Six Shooter Oil Capby Choppers Inc.Polished billet aluminum with .44 magnum shellcasings. See matching handlebar risers in section13 (CC #110233 thru 110235) and shift knob insection 11 (CC #442156). . . . . . . . . . . . . . . . . . .$49.99270110 Sold eachOil Tank PlugChrome-cap oil tank super plugfor all Original Equipment side-filloil tanks from 1965 to present and most customtanks. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$10.9925674 Replaces OEM 62644-84TPrices appearing in this catalog are Suggested Retail Price and are subject to change*23123 23124Rubber VibrationResistant Mounting StudsThis is just the answer for custom builders. Thesestuds are perfect for mounting gas and oil tanks.Sold in packs of 5 (unless otherwise noted).16050 1/4"-20 x 1/2" stud both ends . . . .$15.4916054 5/16"-24 x 3/4" stud both ends(pack of 3) . . . . . . . . . . . . . . . . . . . . . .$23.1423123 5/16"-18 stud on one end with 5/16"-18threaded hole on the other end(repl. OEM 50235-63) . . . . . . . . . . . .$28.99Heavy-Duty Mounting StudsThese studs exceed OEM design standards intensile strength, shear resistance and sag resistance.Sold in packs of 5. . . . . . . . . . . . . . . . . .$28.9923124 1/4"-20 x 1/2" stud at both ends23125 1/4"-20 x 1/2" stud at one end, with1/4"-20 x 3/4" stud at other endRubber MountsReplacement rubber mount is used for mountingHarley ® battery boxes and oil tanks. Made ofquality rubber with 1/4"-20 x 1/2" long threadedstuds and steel plates. This mount also worksgreat for mounting many custom parts.Replaces OEM 62563-65.16055 Pack of 10 . . . . . . . . . . . . . . . . . . . .$2.99 each

Oil Temperature & Pressure GaugesApparelBike Kits& TrailersSeats& BagsAccel ® Oil Pressure GaugePremium quality 60 psi. oil gauge with 11/2"-diameter,four color “Thunder Twin” dial face.Glycerin filled for vibration dampening - withstainless steel housing, glass lens and solid brassinternals. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$43.54270047 Sold eachLiquid Filled GaugesWide selection of liquid filled gauges have a polished stainless steel bezel, chrome case, and a glasslens in either 60-lb. or 100-lb. faces and a 270° sweep. Faces match our 1946 thru 1947 stylespeedometers for FLs, and come complete with fittings.60 Pound Gauges18205 For Big Twins from 1936 thru 1969 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$33.4918206 For Big Twins from 1970 thru 1991 (Original Equipment exhaust system with crossovertube may interfere) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$36.4918210 Replacement fittings for CC #18206 (pack of 5) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$35.99100 Pound Gauges18208 For Big Twins from 1936 thru 1969 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$33.4918209 For Big Twins from 1970 thru 1991 (Original Equipment exhaust system with crossovertube may interfere) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$36.4918210 Replacement fittings for CC #18209 (pack of 5) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$35.99FootControlsHandControlsLightingElectricalExhaustIntakeV-Twin Oil Temperature Gauges1"-diameter face is easy to read and accuratelyshows oil temperatures between 50° and 350°Fahrenheit.19265 Fits most custom and OEM side-fill tanksfrom 1965 thru 1991 except Dyna Glide,Sportster ® and Softail ® models (replacesOEMs 62635-79T, 62666-87T) . . . . .$33.4919266 Fits Sportster ® models from 1982 thru2003 and Softail ® models from 1984thru 1999 (replaces OEMs 62668-87T,62667-87T) . . . . . . . . . . . . . . . . . . . . . .$33.49270046 Fits Softail ® models from 2000 to present(replaces OEM 62896-00) . . . . . . . . .$55.6918440EngineGasketsTranny& ClutchDrivelineWheels,Tires& Brakes‘F Stick’ Oil Temperature GaugeA machined billet aluminum digital oiltemperature gauge for Big Twins. With a rangeof 14 to 240 °F and accuracy within +/- 2 °F the°F-Stick is ideal for monitoring before and afteroil when installing an oil cooler, checking theperformance of different oils/additives or to justkeep an eye on everyday running temperature.Made from 6061-T6 aluminum then showchromed. Stainless steel probe. . . . . . . . . . .$86.99270109 Fits Softail® models from 1984 thru 1999and XL models from 1982 thru 200318446R.O.C. Patent PendingDash Panels withOil Pressure GaugesThese tank panels feature die-cast construction and integral 60 lb.liquid-filled oil pressure gauges. They were designed to emulate the styling ofthe Original Equipment cast dashes fitted to most 4-speed FL, FX and Softail ®models 1968 thru 1999. Each kit includes all of the necessary oil line, fittings andhardware for a quick and easy installation, and fit all Softail ® and4-speed FXWG models from 1983 thru 1999.18440 Chrome dash panel kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$123.9918446 Black wrinkle finish kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$192.9918442 Replacement rubber trim . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$6.69Note: These kits may also be installed on earlier 4-speed FL and FX models with Fat Bob tanks and cast dashes,if the frames are drilled and tapped for the rear mounting screw.FramesForks& ShocksSheetmetalGeneralFor the Dealer Nearest You, Call: 800-729-333216.99CrossReference

Oil Pressure Gauges & Gauge Cups270067270089Gauge notincludedNess-Tech ® Oil Pressure Gaugeand Bracket KitInstall this clean oil pressure gauge kit to keeptrack of your motorcycle’s most vital fluid. The billet aluminum bracket andgauge mounting cone are CNC-machined and then chrome-plated. Thebracket mounts to the rocker cover for easy visibility from the rider’s seat.Each kit includes a stainless steel hose assembly, chrome hardware, and a60-lb. gauge with chrome-plated cone and bracket.05235 Fits all Evolution ® Big Twin models from 1984 thru 1999 . . .$169.9504919 Fits all Sportster ® models from 1993 thru 2003 . . . . . . . . . . . .$164.95270069Replacement Parts05236 Stainless steel hose assembly for CC #05235 . . . . . . . . . . . . . . . .$32.9505237 Ness 60-lb. oil pressure gauge ONLY . . . . . . . . . . . . . . . . . . . . . . .$34.95270089Bottom detailChrome Oil Pressure Gauge CupsDress up that oil pressure gauge. An oil pressure gauge installed into yourengine case is a great accessory, but often looks like an afterthought withits bare housing sticking up for all to see. These chrome gauge cups fromNovello Innovations will transform that bare gauge from zero to hero.Machined from billet aluminum and show-chrome plated. They fit most1.5"-diameter gauges. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$40.24270067 Ball milled270069 Ribbed270089 SteppedNote: Gauge must have square mounting lug on back side to fit gauge cup.Ness-Tech ® RadiusChrome Oil GaugeBracket AssemblyThe latest Radius style featuresstainless housing and glasslens, filled with vibrationdampening glycerin for lastingperformance. Billet bracketmounts oil pressure gauge tothe rear rocker box. Completekit includes Ness ® 60-lb gauge,billet bracket and cone, stainlesssteel hose assembly andnecessary mounting hardware.05889 Fits Twin Cam 88 ® models . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$174.6005897 Fits Evolution ® Big Twin models . . . . . . . . . . . . . . . . . . . . . . . . . . .$159.95Sheetmetal16Oil Pressure Gauge Kitsfor Evolution ® Big TwinsThese kits permit youto check your oilpressure at a glancewhile riding. Theyinclude chromeplatedadapters andan oil line thatconnect the engineblock and the rocker box.Install in minutes and fit allEvolution ® Big Twins from1984 thru 1999. Available with100 lb. or 60 lb. liquid-filledoil pressure gauges. . . . .$43.9918215 Kit with 100 lb. gauge18216 Kit with 60 lb. gauge270071 Replacementchrome fitting kit(gauge not included) . . . . .$14.39D&S/VDO Oil Pressure Gaugewith White FaceClear and easy-to-read, this 100-lb mechanicalgauge features a stable “air-movement”, ratherthan a murky glycerin-filled face. Add a chromehousing and bezel, glass lens and 270° sweep,and you’ve got a gauge that’s easy on the eyes.Sold each. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$37.8423136 100-lb gaugeRocker BoxOil Pressure GaugesA selection of liquid-filled oil pressure gaugeswith unique chrome-plated adapters which permitthem to be mounted to the rear rockershaft.Now you can install your oil pressure gauge in aplace where you can easily read it while you’reriding your bike. Installation takes only a fewminutes because the adapter replaces the stockrockershaft end plug. Fit all 1957 thru 1985Sportster ® models and Shovelhead Big Twinsfrom 1966 thru 1984 with your choice of 60 lb.or 100 lb. gauges. . . . . . . . . . . . . . . . . . . . . . . . .$51.4960 Pound 100 PoundGauge Gauge18211 n/a 1957 thru 197018212 18214 1971 thru 198516.100Prices appearing in this catalog are Suggested Retail Price and are subject to change*

Oil Pressure Gauges & AccessoriesApparel270099Bike Kits& TrailersSeats& Bags60lb. Billet Oil Gauge Kits by Outlaw CycleThese custom oil gauge kits are made with precision craftsmanship and quality materials. Each kit is designed to work with both stock and most stretchedgas tanks. Kits include: billet aluminum gauge housing, durable oil-filled gauge, and braided oil line. Made in USA.Chrome270072 Fits Sportster ® models from 1986 thru 2003 . . . . . . . . . . . . . . . . . . . . . . . .$225.89270074 Fits Evolution ® Big Twin models from 1984 thru 1999 . . . . . . . . . . . . . .$225.89270079 Fits Twin Cam 88 ® models from 1999 to present . . . . . . . . . . . . . . . . . . .$246.29BlackComponents finished in high-tech black.270096 Fits all Twin Cam 88 ® models from 1999 to present . . . . . . . . . . . . . . . .$225.89270099 Fits all Evolution ® Big Twin models from 1984 thru 1999 . . . . . . . . . . .$204.34270074270072270096FootControlsHandControlsLightingElectricalExhaust18199Intake18196EngineLiquid Filled Oil Pressure GaugesMonitor the engines critical oil pressure with theseeye-catching, custom faced gauges. Glass lens, polishedstainless steel bezel. Chrome case filled withvibration damping fluid. . . . . . . . . . . . . . . . . .$26.9960 Pound Gauges18264 Carbon fiber18266 Sunset18268 Engine-turned100 Pound Gauges18265 Carbon fiber18267 Sunset18269 Engine-turnedVDO ® Oil Pressure GaugeBlack on black face and body looks great whenchrome won't do. Mechanical gauge featuresa 100-lb display. . . . . . . . . . . . . . . . . . . . . . . . . . .$34.1927828 Sold each270060270062270063 270064 270065Chrome Oil Gauge FittingsReplacement chrome fittings for CC and mostaftermarket oil gauge kits. Sold each.270060 90° 1/8" NPT female elbow.Used on XL . . . . . . . . . . . . . . . . . . . . . . .$3.34270062 Adapter 1/2"-20 male to 1/8" NPTfemale. Used on 1970-1999Big Twins . . . . . . . . . . . . . . . . . . . . .$6.99270063 Adapter 1/8"-20 NPT male/female.Used on 1938-1969 Big Twins . . . . . .$2.84270064 11/2"-long 1/8" NPT pipe extension.Used on XL . . . . . . . . . . . . . . . . . . . . . .$2.34270065 3"-long 1/8" NPT pipe extension.Used on XL . . . . . . . . . . . . . . . . . . . . . . .$3.59Oil Pressure Gauge Adaptersfor Late-Model Big TwinsMade from ‘6061-T6’ aluminum and available intwo different styles with two different finishes.The dual adapters permit the use of an oil pressuregauge without giving up your dash or instrumentmountedoil pressure light. The single adapters arefor use with an oil pressure gauge only. Both stylesfit all Big Twins (except Twin Cam 88 ® models from1970 thru 1999 (stock exhaust with crossover tubemay interfere). Sold each. . . . . . . . . . . . . . . . .$28.49Natural Black18196 18197 Dual adapter18198 18199 Single adapterOil Pressure Gauge AdapterAllows installation of analog oil pressure gaugeswithout sacrificing the stock warning light. FitsEvolution ® Big Twins 1984 to present.Silver anodized finish. . . . . . . . . . . . . . . . . . . .$30.99020529 Sold eachGasketsTranny& ClutchDrivelineWheels,Tires& BrakesFramesForks& ShocksSheetmetalGeneralFor the Dealer Nearest You, Call: 800-729-333216.101CrossReference

Oil Pressure Switches & CoversChrome Oil Pressure SenderCover Kit by KüryAkyn ®This rubber-lined, easily-installed, die-cast coverkit fits all Evolution ® Big Twins from 1984 thru1999 (except models equipped with large twoterminalsending units). . . . . . . . . . . . . . . . . . .$29.9948265 Sender cover kitDoss Oil Pressure Switch CoverCover the plain-looking stock switch with ourdistinctive ribbed Rick Doss design. . . . . . . .$28.2946328 Fits Evolution ® Big Twin models 1984 topresent with indicator lights2890828858Oil Pressure SwitchesReplacement switches have heavy-duty contactsand thermoplastic insulator. Made in the USA.Fits Evolution ® Big Twin models from 1984 topresent (except models with electric oil pressuregauges). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$8.1917714 Replaces OEM 26561-84Fits Sportster ® models from 1977thru 2003. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$11.3917713 Replaces OEM 26554-77Fits Big Twins from 1941 thru 1984 (exceptEvolution ® models), and Sportster ® and K modelsfrom 1954 thru 1976. . . . . . . . . . . . . . . . . . . . . .$8.0917712 Replaces OEM 26552-72Neutral Switch Coverby KüryAkyn Hide the neutral switch and connector with thischrome-plated custom cover. Fits the switch inthe transmission top cover. . . . . . . . . . . . . . . .$16.9548228 Fits all 5-speed Big Twins from1980 to present‘Bad Ass’ Oil PressureSender CoversClean up your unsightly oil pressuresending unit with one of these chromesteel covers. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$39.9928908 Fits Evolution ® Big Twin engines(except models with side-mount senders)28858 Fits Twin Cam 88 ® engines(except models with oil pressure gauges)25773Sheetmetal16254642546025463Accel ® Oil Pressure SwitchesAmerican-made units with heavy-duty contacts,brass ferrule, thermoplastic insulatorand a bright finish.Fits Sportster ® and K models from 1954thru 1976 and Big Twins from 1941 thru1984 (except Evolution ® models).25460 Replaces OEM 26552-72 . . . . . .$9.11Fits Sportster ® models from 1977 thru 2003.25463 Replaces OEM 26554-77 . . . . .$12.27Fits Evolution ® Big Twin models from 1984to present (except models with electric oilpressure gauge).25464 Replaces OEM 26561-84 . . . . . .$8.7325731Leather Oil Cooler CoversCustom Chrome ® has three variations of ourpopular oil cooler cover. All of these styles fitthe 500 series Lockhart oil cooler, or any of thehorizontal mount Harley-Davidson ® coolerswithout a built-in thermostat.25761 Plain (not shown) . . . . . . . . . . . . . . . .$16.9925773 Embossed . . . . . . . . . . . . . . . . . . . . . . .$16.9925731 With winged concho . . . . . . . . . . . . .$39.9916.102Prices appearing in this catalog are Suggested Retail Price and are subject to change*

Oil Coolers & Conversion KitsApparelBike Kits& TrailersSeats& BagsFootControlsHandControlsBillet Oil Cooler Adapters for Twin Cam 88 ® ModelsClean billet aluminum part mounts between the oil filter housing and theengine case on Twin Cam 88 ® engines (except Softail ® models) to permitrouting of oil cooler lines. Uses standard 3/8" hose connectors. Includesmounting brackets, hardware and hose fittings. Available with chromeplatedor highly-polished finishes.Fits Twin Cam 88 ® Dyna Glide Models from 1999 to Present17995 Chrome . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$105.4917996 Polished . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$96.44Fits Twin Cam 88 ® FLT, FLHT and Road King ® Modelsfrom 1999 to Present18057 Chrome . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$105.4918058 Polished . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$96.44‘Billet-Cool’ Oil Coolers by ACPLower engine temperature with the one-piece American Custom Productsdesign. Installs in minutes between the engine oil filter boss and spin-onfilter. Highly efficient heat sink design pulls heat out of oil as it passes toand from the filter. Machined from 6061-T6 aluminum, eliminating externaloil lines, fittings, brackets, thermostats and valves. A vinyl wrap is includedfor cold-weather riding.For Carbureted ModelsFit Softail ® models 1992 thru 1999; FXR 1992 thru 1994; Dyna Glide models(except FXDWG and Twin Cam 88 ® models); all Sportster ® and Buell ® modelsfrom late 1984 thru 2003 (except with fuel injection).32015 Black powder coated with polished fins . . . . . . . . . . . . . . . . . . .$208.6432016 Natural finish . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$195.84For Fuel-Injected ModelsFit all fuel-injected models from 1995 thru 1998.32017 Black powder coated with polished fins . . . . . . . . . . . . . . . . . . .$224.8432018 Natural finish . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$215.44Optional AccessoriesAdapter nipple: reduces oil filter thread from 3/4" to 5/8"-diameter. Permitsuse of ‘short’ oil filters (CC #26109) when additional clearance is required.32023 Sold each . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$15.49Duo-Nipple: converts a 5/8"-diameter oil filter thread to 3/4". Permitsinstallation of a ‘long’ oil filter (CC #25250) or Billet-Cool Oil Cooler whenclearance permits.32024 Sold each . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$22.49LightingElectricalExhaustIntakeEngineGasketsTranny& ClutchDrivelineU.S. Patent #5,548,893Wheels,Tires& BrakesPerf-form ® Spin-On Oil Filter/Cooler KitCombination oil filter housing/oil cooler mounts directly to most 3/4"-16thread spin-on filter mounts. Provides efficient oil cooling and fast economicalfilter changes. Features high efficiency Perf-form ’HD-X’ disposablefilter cartridges that filter out particulates that are as small as 4 microns,finned aluminum canister housing, stainless steel nut plate and port nut,all necessary seals, a socket filter wrench and three replacement cartridges.Fit all Twin Cam 88 ® models with carburetors from 1999 to present,Evolution ® Big Twins from 1984 thru 1999, and Sportster ® models from late1984 thru 2003 with front-mounted 3/4"-16 thread spin-on oil filters.25018 Polished . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$166.9925019 Replacement HD-X filter cartridge . . . . . . . . . . . . . . . . . . . . . . . . . . .$6.79'Billet-Cool' Oil Cooler Conversion Kits by ACPDesigned by American Custom Products, all pieces are precision-machinedfrom aluminum and stainless steel with satin finish. The fully-adjustabledesign permits installation of a spin-on filter in front of the engine on mostBig Twins. Ideal for custom motorcycle projects. Fits Softail ® models from1984 thru 1999, FXR models from 1982 thru 1991, FLT/FLHT models from1980 thru 1991 and all Shovelhead models from 1970 thru 1984.Note: 1991 thru 1999 Softail ® models require removal of the OEM oil filter mount.32022 Natural aluminum finish . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$276.1932021 Natural aluminum with black accents . . . . . . . . . . . . . . . . . . . . .$296.64FramesForks& ShocksSheetmetalGeneralFor the Dealer Nearest You, Call: 800-729-333216.103CrossReference

Oil Cooler Kits8604986041RBS High-Performance Billet AluminumOil Cooler Kits for Buell ® ModelsCNC-machined kits for installation on the frame side tubes. They will lowerthe temperature up to 30%, and due to the special tapered shape, theywill give your bike a very clean look. Each kit includes frame clamps and3/8" spigot oil line fittings. To connect the oil coolers into the oil circuit,we offer a special oil filter mount adapter with integrated bypass valve(CC #86056 – see page 16.118). With this unique part you will not have toroute meters of oil line to the oil tank. They’re available with polished orblack-anodized finishes and will fit all Buell models. Sold in pairs.86617 Polished oil cooler kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$669.0986618 Black anodized oil cooler kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$764.79Sheetmetal16RBS High-Performance Aluminum Oil Cooler KitsCNC-machined kits for installation on the frame down tubes. They willlower the oil temperature up to 30%, and due to the special shape, theywill give your bike a very clean look. Each kit includes frame clamps and3/8" spigot oil line fittings. To connect the oil coolers into the oil circuit,we offer a special oil filter mount adapter with integrated bypass valve(CC #86056 – see see page 16.118). With these unique parts you will nothave to route meters of oil line to the oil tank. Available with polished orblack-anodized finishes. Sold in pairs.Straight Oil Cooler Kits 7.5"-long (190mm)For Softail ® ModelsFor FXR/Pro-Street Models86049 Polished . . . . . . . . . .$666.89 86050 Polished . . . . . . . . . . . .$612.9986041 Black . . . . . . . . . . . . .$769.19 86044 Black . . . . . . . . . . . . . . .$664.69Straight Oil Cooler Kits 6"-long (150mm)For Dyna Glide ModelsFor Sportster ® Models86052 Polished . . . . . . . . . .$634.99 86051 Polished . . . . . . . . . . . .$633.8986043 Black . . . . . . . . . . . . .$629.59 86042 Black . . . . . . . . . . . . . . .$605.29For Buell ® models86040 Black . . . . . . . . . . . . .$528.39Tapered Oil Cooler Kits 11"-long (280mm)For Softail ® ModelsFor FXR/Pro-Street Models86054 Polished . . . . . . . . . .$666.89 86055 Polished . . . . . . . . . . . .$671.2986114 Black . . . . . . . . . . . . .$769.19 86115 Black . . . . . . . . . . . . . . .$772.49For FLT/FLHT/FLHS Models86053 Polished . . . . . . . . . .$669.0916.10486054Prices appearing in this catalog are Suggested Retail Price and are subject to change*Pro-One Billet Oil CoolerChrome billet aluminum enhances the look of your bike and aids oilcooling to increase reliability. Clamps to frame downtube, completewith A/N type fittings.Bracket fits 1", 11/8", 11/4" frame tubes.65291 Cooler kit without gauge . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$283.9565292 Cooler kit with VDO oil pressure gauge . . . . . . . . . . . . . . . . . . .$314.95Super Mini Oil Cooler KitKit includes clamps, hose ties, and oil line. Black only.Measures 5"-high x 2"-wide x 1"-thick.26412 Complete kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$24.4926398 Cooler only . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$23.39

Oil Cooler Kits & Oil Lines25289ApparelBike Kits& TrailersFrame Downtube Mount Oil Cooler KitsOil coolers by NYC have both performance and good looks. Thesefinned oil coolers are functional art! Now you can have a very efficientoil cooler that adds to the appearance of your bike whilereducing oil operating temperatures 20-30%. All NYC cooler coresare machined from billet aluminum. Available polished or chromeplated.Frame clamps are machined from billet aluminum, andavailable either chrome plated or black powder coated.Chrome with Chrome Clamps270462 Fits models with 11/8" down tubes: FLST, FXST thru 1999,FLHR-FLHT thru 2000, FL and FLH 1965-1984, FX 1971-1980,and FXWG 1985-1999 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$352.99270463 Fits models with 11/4" down tubes: FLST 2000 and FXRall years . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$352.99Polished with Black Powdered Coated Clamps270467 Fits models with 11/8" down tubes: FLST, FXST thru 1999,FLHR-FLHT thru 2000, FL-FLH 1965-1984, FX 1971-1980and FXWG 1985-1999 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$352.9927046225276 25292Perf-form Oil Coolers/FiltersMade of polished and lacquered cast aluminum,these combination oil filters and coolers mountexternally in front of the engine. They fit all4-speed Big Twins from 1970 thru 1984 wheninstalled in conjunction with a CC #25289 bracket.Kits includes an oil filter, the canister withchrome-plated hose fittings, 7 feet of 3/8" oilline, 4 hose clamps and 4 tie-wraps.25276 Recessed fins . . . . . . . . . . . . . . . . . .$130.6925292 External fins . . . . . . . . . . . . . . . . . .$130.69Accessories and PartsOptional chrome mounting bracket. Bolts to theleft front footpeg and kickstand frame lug tomount the oil filter/cooler horizontally over thevoltage regulator in front of the engine.25289 Chrome mounting bracket . . . . .$30.5425545 Replacement oil filter element (mustbe used with above kits, otherelements will cause restriction) . .$7.19Seats& BagsFootControlsHandControlsLightingElectricalExhaustIntakeEngineRussell ‘Street-Flex’ Pre-CutOil Line KitsFor oil lines, oil coolers and remote oil filters, thesestainless steel wire braided kits are pre-cut to OEMlengths for easy installation. Each kit includesenough Tube Seal hose ends to complete theinstallation. Fit most models from 1968 thru 1991.For 4-Speed FL and FX models 1968 thru1986 (including models with primary beltdrive) and Softail ® models 1984 thru 198613300 Engine kit without oil cooleror outside-the-tank filter . . . . . . . . .$90.9913320 Engine kit with oil coolerand in-tank filter . . . . . . . . . . . . . . .$137.9913330 Oil cooler lines ONLY . . . . . . . . . . .$103.9913370 Oil filter kit for modelswith spin-on filters . . . . . . . . . . . . . . .$90.99For Softail ® Models from 1987 thru 199113345 Engine kit without oil cooler . . . .$129.9913330 Oil cooler lines ONLY . . . . . . . . . . .$103.99For FXR Models from 1982 thru 198613310 Engine kit without oil cooler . . . . .$66.9913340 Oil cooler lines ONLY . . . . . . . . . . . .$79.99For FXR Models from 1987 thru 199113291 Engine kit without oil cooler . . . .$109.9513340 Oil cooler lines ONLY . . . . . . . . . . . .$79.99Russell Stainless Steel Hose3/8" Custom Oil Line KitIncludes 8-feet of stainless steel hose and eighttumbled aluminum Tube-Seal hose ends, morethan enough for most standard applications.However, for bikes with oil coolers or outsidethe-tankoil filters, additional hose may berequired, and is available in bulk lengths.13295 Stainless . . . . . . . . . . . . . . . . . . . . . . .$65.99Stainless Steel Bulk Hose3 Foot Roll13405 Stainless 5/16"-diameter . .$27.99 per roll13410 Stainless 3/8"-diameter . . .$20.99 per roll6 Foot Roll13415 Stainless 1/4"-diameter . . .$29.95 per roll13420 Stainless 5/16"-diameter . .$35.99 per roll13425 Stainless 3/8"-diameter . . .$35.99 per roll10 Foot Roll13430 Stainless 1/4"-diameter . . .$43.95 per roll13435 Stainless 5/16"-diameter . .$51.99 per roll13440 Stainless 3/8"-diameter . . .$59.95 per roll25 Foot Roll13445 Stainless 1/4"-diameter . .$108.95 per roll13450 Stainless 5/16"-diameter .$126.95 per roll13455 Stainless 3/8"-diameter . .$150.95 per rollReplacement Hose Ends (Pack of 6)13350 For 1/4" hose . . . . . . . . . . . . . . . . . . . .$19.9513351 For 5/16" hose . . . . . . . . . . . . . . . . . . .$19.9513352 For 3/8" hose . . . . . . . . . . . . . . . . . . . .$19.95Stainless SteelOil Cooler Hose KitsIncludes pre-cut braided oil cooler lines (52” and44” length), chrome hose ends and tie straps.Replaces OEM 63701-82.270570 Stainless braided . . . . . . . . . . . . . . . .$71.69GasketsTranny& ClutchDrivelineWheels,Tires& BrakesFramesForks& ShocksSheetmetalGeneralFor the Dealer Nearest You, Call: 800-729-333216.105CrossReference

Braided Oil Lines128521286412863128611285312860 12862128541286512851Sheetmetal1612850Steel Braided Oil Line Setsfor Softail ® ModelsThese kits are the ultimate upgrade for theoiling system on Softail ® models. Each ofthese bolt-on kits is made with high-qualitypre-formed and braided oil line terminatedwith bright zinc chromate fittings.12850 Fits Softail ® models from 1993 thru1999 with new style oil pump andnew style oil filter mount (4-piece kitin which the extra line replaces theOriginal Equipment steel oil filterpipe) . . . . . . . . . . . . . . . . . . . . . . . . . . .$159.9912851 Fits Softail ® models from 1992 thru1999 with new style oil pump(3-piece kit) . . . . . . . . . . . . . . . . . . . . .$122.9912853 Fits Softail ® models from 1990 thru1991 with stock oil tanks, oil filtermounted to the right-side frameloop and the ignition modulemounted under the seat . . . . . . . .$159.9912854 Fits 1989 Softail ® models ONLY withstock oil tanks, oil filter mountedto the right-side frame loop andthe ignition module mountedunder the seat . . . . . . . . . . . . . . . . . .$159.9912852 Fits 1986 5-speed Softail ®models ONLY . . . . . . . . . . . . . . . . . . .$159.9912843 Fits Twin Cam 88 ® Softail ® modelsfrom 2000 to present . . . . . . . . . . .$159.99Steel Braided Oil Line SetsComplete stainless steel oil line sets with top-quality fittings.12860 Fits 4-speed Shovelhead models from 1968-early 1982 with stock oil tankcontaining an internal oil filter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$92.9912861 Fits 1966 thru 1967 Shovelhead models with a wraparound oil tank . . . . . . . . . . . . . . . . . . . . . .$82.9912862 Fits 1968 thru 1980 Shovelhead models with a wraparound oil tank . . . . . . . . . . . . . . . . . . . . . .$92.9912863 Fits 1936 thru 1964 Knuckleheads and Panheads with wraparound oil tanksin rigid frames . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$82.9912864 Fits 1936 thru 1964 Knuckleheads and Panheads with wraparound oil tanksin swingarm frames . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$84.9912865 Fits 1936 thru 1957 Knuckleheads and Panheads with wraparound oil tanksin rigid frames using stock oil filters mounted in front of the rear exhaust pipe(will not work with the voltage regulator mounted on back of engine) . . . . . . . . . . . . . . . . . . .$98.9912841 Fits FXR models from 1992 thru 1999 with stock oil tank and late-style oil filterwith oil filter bracket mounted to the right side of the engine . . . . . . . . . . . . . . . . . . . . . . . . . .$159.9912842 Fits custom frames. 4 line kit for bikes with wraparound oil tanks with 1/8" NPTbottom female vent and return lines, 1992 thru 1999 style oil pump, and 1/4" NPTthreads on the oil filter housing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$159.99Goodridge ® Stainless Steel Oil Line KitsComplete braided oil line kits made with chrome fittings,crimped onto stainless braided, smooth-bore teflon hose.Available for most Evolution ® , Shovelhead and Sportster ®models from 1968 thru 2003.Part # Applications Year84756 Fits Softail ® models 1992 thru 1999 . . . .$193.7984755 Fits Softail ® models 1986 thru 1991 . . . .$258.3984754 Fits Softail ® modelswith RevTech ® engines all years . . . . . . . . . . .$258.3984758 Fits FLT/FLHT models 1994 thru 1998 . . . .$209.8984759 Fits Dyna Glide models 1991 thru 1998 . . . .$209.9928187 Fits Dyna Glide models 1991 thru 1998with oil cooler . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$209.7984762 Fits FXR models 1992 thru 1994 . . . .$161.4984764 Fits FXR models 1986 thru 1991 . . . .$234.1984761 Fits Sportster ® models 1991 thru 2003 . . . .$209.99Note: CC #84754 will also fit Original Equipment engines if the hard oil linesare removed from the oil filter.Steel BraidedOil Line SetComplete stainless steel sets for4-speed models (except Softail ®models) with stock or wraparoundoil tanks in swingarm frames andour oil filter kits (CC #’s 26650 or26652) mounted behind the rearexhaust. All lines feature top-qualityfittings. . . . . . . . . . . . . . . . . . .$97.9912855 For Knuckleheadsand Panheads12856 For Shovelheads16.106Prices appearing in this catalog are Suggested Retail Price and are subject to change*

Braided Oil LinesApparelBike Kits& Trailers270581Seats& Bags270579FootControlsBraided Oil Line Kits for Softail ® ModelsThese American made oil line kits feature super high quality stainlesssteel hose with a Teflon inner liner that is pressure rated to 3,000 psi andtemperatures to 450° F. Designed for late model Softail ® with stock wraparoundoil tank. Kits includes braided lines with cad-plated fittings andinstructions.270581 Fits Softail ® models from 1987 thru 1989 . . . . . . . . . . . . . . . . . . . .$159.99270579 Fits Softail ® models from 1990 thru 1991 . . . . . . . . . . . . . . . . . . . .$159.99Big Bore ‘High Flow’ Universal Oil Line KitIncreased diameter flows more oil for Strokers and other high-performancemotors. Features oversized 3/8" inside diameter with 1/8" female pipeinlets and outlets. Bolt-on kit is made with high-quality pre-formed andbraided oil lines terminated with bright zinc chromate fittings. Fits Softail ®models from 1993 thru 1999 (4-piece kit in which the extra line replaces theOriginal Equipment steel oil filter pipe). Also fits after-market oil tanks andmotors and bike kits from 1993 to present (comes with adapter kit of eightextra fittings). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$171.9912844 Complete kitHandControlsLightingElectricalExhaustIntakeEngine28015270575 270576 270578Braided Oil Line KitsStainless steel oil line kits for Big Twins 1936-1982.270575 Fits Big Twins 1936-1964 with stock andmost custom oil tanks . . . . . . . . . . . .$80.26270576 Fits 4-speed Big Twins 1968-early 1982with custom wrap around style oil tankswith threaded fittings and open or beltdrive primary. Horseshoe type with fixedside fittings . . . . . . . . . . . . . . . . . . . . . .$84.49270578 Fits 4-speed Big Twins 1968-early 1982with stock oil tanks and closed chaindrive primary . . . . . . . . . . . . . . . . . . . .$79.991242712428Overhead Rocker Arm Oil LinesA custom upgrade that can be used in place ofthe Original Equipment cad-plated hard lines.Sold in sets. . . . . . . . . . . . . . . . . . . . . . . . . . . .$19.9912427 For 1966 thru 1984 Shovelheads12428 For 1957 thru 1985 Sportster ® models28016Chrome Rocker Oil LinesChromed replacement rocker box oil lines forSportster ® models and Shovelheads. Includescomplete set of fittings and seals (2 lines).28015 Fits Shovelheads from 1966thru 1984 (repl. OEMs 62783-66A,62785-66A) . . . . . . . . . . . . . . . . . . . . . .$19.9928016 Fits Sportster ® models (exceptmagneto models) 1957 thru1985 (repl. OEM 17324-57A) . . . . .$19.99Rocker Box Oil Line FittingsIncludes chrome fittings and seals for the rockerbox oil lines on all Sportster ® models andShovelheads from 1957 thru 1985.010421 Sold in pairs (repl. OEMs 63527-57A,63526-57) . . . . . . . . . . . . . . . . . . . . . . . .$6.1912074 Motor Factory ® oil line sleeves ONLY(repl. OEM 63529-57) pack of 10 . .$2.09091210 Athena oil line sleeves ONLY(repl. OEM 63529-57) pack of 10 . .$4.04Russell Pro System Oil Line KitsRussell’s innovative new hose end designeliminates ugly and troublesome clamps withattractive and functional compression fittings.The threaded two-piece fittings slip over theend of the nipples and tighten for a troubleand leak-free attachment.13388 Fits Softail ® models from late 1992thru 1999 . . . . . . . . . . . . . . . . . . . . . . . .$139.9513387 Fits Softail ® models from 1990to early 1992 . . . . . . . . . . . . . . . . . . . .$217.9913386 Fits Softail ® models from 1987thru 1989 . . . . . . . . . . . . . . . . . . . . . . . .$173.9913394 Fits Dyna Glide models from 1992thru 1998 . . . . . . . . . . . . . . . . . . . . . . . .$124.9513389 Fits 1987 thru 1990 FXR models . . .$226.9913390 Fits 1991 thru 1994 FXR models . . .$209.9913393 Fits Sportster ® models from 1994thru 1999 . . . . . . . . . . . . . . . . . . . . . . . .$124.9513392 Fits Sportster ® models from 1991thru 1993 . . . . . . . . . . . . . . . . . . . . . . . .$178.99GasketsTranny& ClutchDrivelineWheels,Tires& BrakesFramesForks& ShocksSheetmetalGeneralFor the Dealer Nearest You, Call: 800-729-333216.107CrossReference

Oil Lines & FittingsSpectre ®Pre-Formed OilLine KitsAdd custom braidedstainless lines or replacestock rubber with theseprecision formed kits.Made by Spectre ® usingtheir ‘SSteelFlex’ stainlessreinforced hose in naturalstainless.Stainless Steel Pre-Formed Kits11772 Fits 1992-1999 Softail ® models . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$131.9911773 Fits 1987-1991 Softail ® models . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$131.9911774 Fits FLT/FLHT models from 1993 thru 1998 . . . . . . . . . . . . . . . . . . .$131.9911775 Fits Dyna Glide models from 1993 thru 1998 . . . . . . . . . . . . . . . . .$131.99Spectre ® SSteelFlex Stainless HoseMade of highest-quality 304 stainless steel braided hose in rolls for shopuse. Ideal for custom fuel and oil lines. Sold in 25 foot rolls.11761 1/4" SSteelFlex hose . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$3.69 per foot11762 5/16" SSteelFlex hose . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$4.69 per foot22231 3/8" SSteelFlex hose . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$5.68 per footChrome RevTech ® Hose ClampsThese aircraft-style clamps give youroil and fuel lines a professional racinglook at a fraction of the cost of A-Nfittings. Just slide them on and tightenthe gear drive clamps. Chrome-platedfinish. Sold in pairs.11754 5/16" . . . . . . . . . . . . . . . . . .$15.4911757 3/8" . . . . . . . . . . . . . . . . . . .$15.49260530Stainless Steel Braided HoseSold in 25 ft. rolls.260530 1/4" ID x 25’ . . . . . . . . . . . . . . . . . . . . .$99.99260532 5/16" ID x 25’ . . . . . . . . . . . . . . . . . . .$108.99260534 3/8" ID x 25’ . . . . . . . . . . . . . . . . . . . .$118.49SheetmetalSteel Braided Fuel Line KitThis kit can be used to replace the fuel crossoverline (between tanks) or fuel feed line (betweenpetcock and carburetor). Fits all models with1/4" I.D. fuel lines. Kits include 16" braided hoseand a pair of chrome end caps. . . . . . . . . . .$34.55270565 Replaces OEM 63730-82Reinforced Black NeopreneFuel and Oil LineFits all models. Available in 25 and 50-foot rolls,this top-quality line is reinforced with highstrengthrayon. Neoprene outer cover resists oiland grease for years of trouble-free service.25 Foot Rolls12383 3/16" x 25 feet . . . . . . . . . .$22.75 per foot12384 1/4" x 25 feet . . . . . . . . . . .$22.99 per foot12385 5/16" x 25 feet . . . . . . . . . .$27.25 per foot18235 3/8" x 25 feet . . . . . . . . . . .$29.50 per foot50 Foot Rolls260542 1/4" x 50 feet . . . . . . . . . . .$41.49 per foot260547 5/16" x 50 feet . . . . . . . . . .$54.99 per foot260541 3/8" x 50 feet . . . . . . . . . . .$54.99 per footMagnum ‘Sterling Chromite ’Oil and Fuel LinePremium braided hose with patented wire braiddesigned to match the brilliance of chrome. Eachstrand of wire is sterling silver plated and coatedwith high-temperature plastic before braidingfor easy cleaning and to prevent scratches.Made in the USA.15349 5/16" x 6 feet . . . . . . . . . . . . . . . . . .$48.95Magnum Chrome Hose ConnectorsSmooth updated style. Includes stainless steelhose clamps.45173 Fits 1/4"-5/16" line (pack of 2) . .$12.2945175 Fits 1/4"-5/16" line (pack of 6) . .$28.4945174 Fits 3/8" line (pack of 2) . . . . . . . .$12.2945176 Fits 3/8" line (pack of 6) . . . . . . . .$28.4916EARL‘S Econo-Seal Hose EndsPerfect for gas and oil lines. Provides additionalsupport and helps prevent cracking. When usedwith custom steel braided lines they present adynamite custom look. Pack of 6. . . . . . . . .$31.1412366 1/4" chrome12367 5/16"-3/8" chromeRussell Hi-Flow Universal Crossover Fuel LineThis steel braided hose features a 5/16” I.D. for optimum flow between tank halves. Mounts withsqueeze type nut and rubber ferrule for a no leak, positive seal. Hardware is chrome plated for thatclean, custom look. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$42.99260568 Universal fit. 111/2"-long16.108Prices appearing in this catalog are Suggested Retail Price and are subject to change*

Oil Line FittingsApparelBike Kits& TrailersSeats& BagsGoodridge Braided Stainless SteelCable and Hose CoversAre you tired of looking at your ugly vinylcables? Here’s the solution. Stainless steel coversfor frequently used applications. Available infour different diameters to fit cables, oil lines,water hoses etc. Sold in 1 meter lengths.85122 Fits 6-16mm outer diameters85123 Fits 13-20mm outer diameters85124 Fits 20-38mm outer diameters85125 Fits 38-57mm outer diameters06504Ness ® Chrome Spring Hose CoversChrome-plated spring covers protect hoses fromhot surfaces. Available for oil or fuel lines. Oilhose cover is sold in 6-foot lengths and fuel hosecover is sold in 3-foot lengths.04987 Fits 3/8" oil line . . . . . . . . . . . . . . . . . .$24.9904988 Fits 5/16" fuel line . . . . . . . . . . . . . . .$14.99Oil Line FittingsChrome fittings used for oil tank, oil pump, oilcoolers, carb fuel inlet, etc. Sold in 5 pack.020531 Straight fitting. 3/8" hose to 1/8" NPT.Replaces OEM 63533-41 . . . . . . . . . . .$6.99020533 Straight fitting. 5/16" hoseto 1/8" NPT . . . . . . . . . . . . . . . . . . . . . .$12.49020534 Straight fitting. 1/4" hose to 1/8" NPT.Replaces OEM 63578-52 . . . . . . . . . .$12.49020535 Straight fitting. 5/16" hoseto 1/4" NPT . . . . . . . . . . . . . . . . . . . . . .$12.49020530 90° fitting. 3/8" hose to 1/8" NPT.Replaces OEM 26496-75 . . . . . . . . . .$12.49020536 90° fitting. 5/16" hose to 1/8" NPT.Replaces OEM 62375-57 . . . . . . . . . .$12.49020538 Pipe plug, 1/8" NPT . . . . . . . . . . . . . .$12.49020539 Pipe plug, 1/4" NPT . . . . . . . . . . . . . .$12.49FootControlsHandControlsLightingElectricalExhaust06500‘E-Z Flow’ Quick-DisconnectFuel CrossoversThe only quick, clean and safe way to removeyour fuel tanks. Special hose connectors keepfuel in the tanks when crossover is removed.Stainless steel braided, reinforced fuel line withchrome couplings and hose ends. Made in USA.06500 Fits all 4-speed FL and FX modelsthru 1986 and all Softail ® modelsfrom 1984 to present . . . . . . . . . . . .$88.3906501 Fits Road King ® models from 1994to present, and all FLT and FLHTmodels from 1995 to present . . . . .$99.4906502 Fits all FLT, FLHT and FLHS modelsfrom 1980 thru 1988 . . . . . . . . . . . . .$88.3906503 Fits all FLT, FLHT and FLHS modelsfrom 1989 thru 1994 and Sportster ®models with Quick Bob tanks . . . .$88.39‘Econo-Flow’Same great concept as the original ‘E-Z Flow’but less flash for less cash. Made with blackplastic couplings and black rubber fuel line.Can be used for crossover line or as fuel linefor fast tank removal. Total length of 24" thatcan be cut to fit most applications. . . . . . . .$44.8906504 For 1/4" I.D fuel lines06505 For 5/16" I.D. fuel linesOil Line FittingsFits steel and braided fixed-end lines.(1/8" NPT). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$8.69270598 Sold in 3 packOil Line Adaptersby Paul Yaffe OriginalsHave you ever wondered why there is no wayto connect rubber or braided oil lines to a “B”engine? Well wonder no more because thesetrick stainless steel oil line adapters for allTwin Cam 88 B motor models have been born.They work like compression fittings and haveno ugly hose clamps. . . . . . . . . . . . . . . . . . . . .$144.9906579 For use when installing rubber orbraided oil lines to Twin Cam 88 ® ‘B’engine modelsOil Line Fittings for Twin Cam 88 ®Models by F. KodlinDesigned by Master Customizer Fred Kodlin toconnect 3/8" steel braided oil lines to motors onTwin Cam 88 ® ‘B’ models. Polished stainless steel.Sold each (3 required). . . . . . . . . . . . . . . . . . . .$37.4986922 Fits all Twin Cam 88 ® ‘B’models8475320234Oil Line T-Piece and FittingsBrass T-piece with 3/8" spigot and chrome-platedoil line fittings with 1/8" NPT thread and 3/8"spigot. Sold each.84753 Brass T-piece . . . . . . . . . . . . . . . . . . . . . .$7.9920235 Fitting, straight(repl. OEM 63539-41) . . . . . . . . . . . . .$2.6420234 Fitting, 90° (repl. OEM 26496-75) . .$2.8412533 1253420235Original-Style Oil Pump FittingsOriginal-style fittings used with some customoil tanks to convert nipples so stainless-steelbraided lines may be used. Set of 3. . . . . . . .$7.9912533 Fit nylon and braided hose12534 Fit steel and braided fixed-end linesIntakeEngineGasketsTranny& ClutchDrivelineWheels,Tires& BrakesFramesForks& ShocksSheetmetalGeneralFor the Dealer Nearest You, Call: 800-729-333216.109CrossReference

Oil Line Separators & ClampsNess-Tech ® Radius Chrome BilletHose SeparatorsPerfect accessory to neatly route oil hoses.Sold in pairs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$34.9505886 Fits 5/16" and 3/8" braided hoseHose SeparatorsAvailable in plain or ball milled to matchour other custom accessories, these diecasthose separators will fit 3/8" or 5/16"I.D. rubber or stainless steel oil and fuellines on Big Twin and Sportster ® models.Sold each. . . . . . . . . . . . . . . . . . . . . . . . . .$10.99Plain Ball Milled380300 78396 Chrome380301 380351 Polished380302 380352 Blue380303 380353 Black380304 n/a Red380351380353380301380300380303380302380352270609270608380305270606Triple Hose SeparatorKeep lines neatly bundled with these separatorsfit 3/8" or 5/16" rubber or stainless steel hoses.Secures with flush sockethead screws.380305 Chrome . . . . . . . . . . . . . . . . . . . . . . . . .$12.49380306 Polished . . . . . . . . . . . . . . . . . . . . . . . . .$10.99380355 Chrome ball milled . . . . . . . . . . . . . .$13.99380356 Polished ball milled . . . . . . . . . . . . . .$12.49Chrome Hose Ends by GoodridgeEmbossed with the Goodridge name and logoand plated in durable show quality chrome,these hose connections feature smooth, tighttapers for close fitment, yet retain hex wrenchadjustability. Includes stainless worm driveclamps. Sold in packs of six. . . . . . . . . . . . . . .$27.4914975 Fits 1/4" braided hose14976 Fits 5/16" and 3/8" braided hose270607Custom Hose ClampsThese custom hose clamps feature a great lookwith reliable function. Under each custom hosecover is a weather resistant worm-drive hoseclamp. Sold in packs of 6270606 3/8"-diameter. Slotted . . . . . . . . . . .$30.49270607 1/4"-diameter. Slotted . . . . . . . . . . .$31.99270608 3/8"-diameter. Grooved . . . . . . . . . .$33.49270609 1/4"-diameter. Grooved . . . . . . . . . .$34.99Sheetmetal16Billet ‘Oil Star’ Line HolderKeeps your oil lines clean and organized. Takesup to 3 oil lines and fits them into 1 bundle.Comes in polished billet aluminum and includeschrome tie wraps. Fits 3/8" or 5/16" oil lines.12848 Sold each . . . . . . . . . . . . . . . . . . . . . . . .$36.99Custom Hose ClampsFits over oil and fuel lines. Available withchrome or blue anodized finish. Sold in 6 packs.270600 Chrome. Fits 3/8" and 5/16" I.D. hoses(up to 5/8” O.D.) . . . . . . . . . . . . . . . . $28.99270604 Blue. Fits 3/8" and 5/16" I.D. hoses(up to 5/8" O.D.) . . . . . . . . . . . . . . . . .$22.89270601 Chrome. Fits 1/4" I.D. hose(up to 1/2" O.D.) . . . . . . . . . . . . . . . . .$28.99270605 Blue. Fits 1/4" I.D. hose(up to 1/2" O.D.) . . . . . . . . . . . . . . . . .$25.99Crimp Hose ClampsOEM style hose clamps. Note: Diameters listedare before crimping. Sold in 50 pack.260482 17/32” (.531) diameter. Fits 1/4” I.D. reinforcedrubber fuel line and vent hoses.Replaces OEM 10014 . . . . . . . . . . . . .$16.99260483 19/32” (.594) diameter. Fits 5/16” I.D.rubber remote brake reservoir hose.Replaces OEM 10038 . . . . . . . . . . . . .$16.99260484 11/16” (.687) diameter. Fits 3/8” I.D. reinforcedrubber oil and vent hoses.Replaces OEM 10020A . . . . . . . . . . .$16.99260485 13/16” (.812) diameter.Fits all tank drain noses.Replaces OEM 10086 . . . . . . . . . . . . .$16.99Mini Hose ClampsQuality clamps for all 7/32" to 5/8" O.D. hose.19883 Card of 24 . . . . . . . . . . . . . . . . . .$0.89 ea.19878 Box of 10 . . . . . . . . . . . . . . . . . . .$0.89 ea.16.110Prices appearing in this catalog are Suggested Retail Price and are subject to change*

Oil Filter Kits & HousingsApparelBike Kits& TrailersSeats& Bags85847 85849Filter PacCustom oil filter and regulator mount designedto clean-up front lower mount area. Attaches tothe front of the engine. Includes a chrome billetaluminum base plate, chrome hose fittings anda chrome oil filter. Utilizes stock regulator. Fitsall Softail ® and 4-speed Big Twin models from1975 thru 1999.25270 Complete kit . . . . . . . . . . . . . . . . . . .$173.2926109 Replacement oil filter . . . . . . . . . . . . .$8.1485848F. Kodlin Oil Filter MountsChrome-plated billet aluminum oil filter mountsto replace the factory part on all Evolution ®Big Twins from 1992 thru 1999 or for custombuiltmotors. They include fittings.85847 ‘Drop’ . . . . . . . . . . . . . . . . . . . . . . . . . .$414.8985848 ‘Grooved’ . . . . . . . . . . . . . . . . . . . . . .$414.8985849 ‘Halebob’ . . . . . . . . . . . . . . . . . . . . . .$414.89FootControlsHandControlsLightingElectrical25248ExhaustIntake25247 270019Oil Filter KitsFull flow automotive style spin-on oil filter kits.Each of these custom kits includes a chromedheavy-gauge steel bracket, chrome disposableoil filter, and all required hoses and clampsfor installation.25247 Fits all 1970 thru 1978 Big Twinswithout front motor mountedrectifier/regulator (mounts ontop of front motor mount) . . . . . . .$57.9925248 For all Sportster ® models 1957thru 1977 (mounts to left frontmotor mount location) . . . . . . . . . .$57.99270019 Fits frame tubes, excellent forcustom applications . . . . . . . . . . .$52.9925250 Replacement oil filter . . . . . . . . . . . . .$9.89270409 Chrome mounting bracket ONLYfor CC #25247 kit . . . . . . . . . . . . .$26.49Chrome Oil Filter Adapterby Pro-One 1/2"-thick billet aluminum oil filter adapter hasexternal fittings. Great for slim-looking oil filtermounting. Has standard 3/8" hose fittings foroil lines. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$73.9565446 Fits Evolution ® Big Twinsfrom 1992 thru 1999Chrome Oil Filter Housing CoversStamped steel cover fits over the stock oil filterhousing. Includes a cover for the frame bosswhich holds the housing, and special chromemounting hardware. Fits all Softail ® modelsfrom 1987 thru 1991. . . . . . . . . . . . . . . . . . . . .$40.9923168 Complete kitOil Filter Kit for Big TwinsThis chrome bracket and filter kit mounts behind kickstand bracket on4-speed Big Twins 1970-1984. Includes chrome bracket, oil filter, hoseand clamps.Note: may interfere with some aftermarket forward shifters.270405 Filter kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$54.49270000 Replacement chrome filter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$10.99EngineGasketsTranny& ClutchDrivelineWheels,Tires& BrakesFramesForks& ShocksSheetmetalGeneralFor the Dealer Nearest You, Call: 800-729-333216.111CrossReference

Oil Filter Kits & HousingsChrome Oil Filter Housing CoverStamped steel cover was designed to fit like a second skin over the OriginalEquipment oil filter housing on late-model Evolution ® Big Twins. It providesan economical means of chroming the right side of your bike and installs inminutes, and is held in place with silicone (included in the kit). . . . . . .$37.9926167 Fits all Evolution ® Big Twin models from 1992 thru 1999Chrome Oil Filter Housing Kit for Twin Cam 88 ® ModelsThis housing fits the front of all Twin Cam 88 ® ‘A’ engines ONLY from 1999to present. Includes all mounting hardware. . . . . . . . . . . . . . . . . . . . .$36.4918569 Sold eachSheetmetalChrome Oil Filter Housing for Evolution ® Big TwinsReplace that Original Equipment black or silver painted oil filter housing.Fits all Evolution ® Big Twin models from 1992 thru 1999. . . . . . . . . . . . .$40.9920301 For stock oil lines (repl. OEM 26381-92A)20302 For custom slip-over steel braided or rubber oil lines270443 Replacement nut and seal kit (repl. OEMs 63530-92 and 63528-92)4 pieces . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$10.99Oil Filter Mount Adapter with Internal ThermostatThis unique part eliminates the need to route oil line from the oil cooler tothe oil tank. Just mount it between the oil filter mount and the oil filterand connect the oil lines. Another feature is the internal thermostat for usewith oil coolers. No need to install an extra in-line thermostat to the frame.Does not include oil filter mount or filter.86056 Fits most Evolution ® Big Twins from 1992 thru 1999 . . . . . . . . .$318.0987004 Fits most Twin Cam 88® Big Twins from 1999 to present . . . .$286.6986067 Replacement gasket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Call for price1616.112Prices appearing in this catalog are Suggested Retail Price and are subject to change*

Oil Filter Kits & AccessoriesApparelBike Kits& TrailersSeats& BagsEarly-Style AccessoryOil Filter SystemAccurate reproduction of the early accessoryoil filter kit used on 1940 thru 1964 BigTwins. Can be easily fitted to 4-speed andSoftail ® models.26652 Chrome oil filter assembly with gasket kit and filter (replaces OEMs63800-48 and 63800-58) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$63.4926656 Gasket kit for oil filter assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$5.2926657 Filter element (sold each) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$6.49Note: Does not include oil hose.Spin-On Oil Filter KitA high-tech replacement for yourcanister-type oil filters. It’s approximatelythe same size as the stock unit and accepts CC #25250chrome spin-on filter to eliminate leaks. Makes filterchanges clean and easy. Comes with both threaded and slip-on fittings.Uses our mounting brackets.26650 Spin-on filter kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$48.4925250 Replacement filter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$9.89FootControlsHandControlsLightingElectricalExhaustIntakeEngine270408Vintage Oil Filter Kit for Big TwinsWe’ve combined our popular chrome vintage filter assembly with the properhardware to fit 4-speed Big Twins 1965-1984. Kit includes filter assembly,bracket, fittings, and stainless steel braided hose with chrome ends.270408 Filter kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$89.99Oil Filter Mounting Bracketfor Softail ® ModelsChrome-plated steel mounting bracket is for the Softail ® owner who is tryingto make his bike look like a 1950s Panhead. It permits the installationof an early-style external oil filter in close proximity to the oil tank toreplace the stock spin-on filter. May be used in conjunction with Part#26652 early-style oil filter, or Part #26650 early-style oil filter with spin-onfilter. Kit comes complete with bracket, custom nut and drilling templatefor the frame. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$27.9926659 Fits Softail ® models from 1984 thru 1999GasketsTranny& ClutchDriveline2665426653 26655Wheels,Tires& BrakesFramesOil Filter WrenchFits all Harley-Davidson ® spin-on filters. 3/8" socket drive. . . . . . . . . . . .$12.34400503 Sold eachOil Filter Mounting BracketsChrome steel brackets to mount accessory oil filters. Designed for use inconjunction with CC #’s 26650 or 26652 oil filter kits. Available for rigid andswingarm 4-speed Big Twin frames from 1940 thru 1986.26653 Fits 1940 thru 1957 rigid frames(repl. OEM 63860-50) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$13.9926654 Fits 1958 thru 1964 swingarm frames(repl. OEM 63860-58A) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$13.9926655 Fits 1965 thru 1986 4-speed frames(except Softail ® models) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$13.99Forks& ShocksSheetmetalGeneralFor the Dealer Nearest You, Call: 800-729-333216.113CrossReference

Oil FiltersNowAvailable forV-RODModels25543NowAvailable forV-RODModelsMagneticOil FilterSheetmetal162522125250Premium ® Oil Filters for Twin Cam 88 ® ModelsThese oil filters were developed for the Twin Cam 88 ® engine but are also a greatupgrade for replacing the ‘long’ filters on other models for increased protection fromcontamination. They’re capable of trapping particulates down to 10 microns in size andfit all Twin Cam 88 ® models from 1998 to present, as well as all 5-speed models (exceptDyna Glide models) from 1980 to present, late 1984 thru 2003 Sportster ® models, and allSoftail ® models from 1984 to present.22250 Chrome (replaces OEM 63798-99) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$11.0922251 Black (replaces OEM 63731-99) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$9.14Premium ® Oil Filters for V-Rod ® ModelsDeveloped specifically for the unique demands of the Revolution ® engine. They’recapable of trapping particulates down to 10 microns in size and fit all VRSC modelsfrom 2002 to present.625222 Chrome (replaces OEM 63793-01) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$7.99625223 Black (replaces OEM 63793-01) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$6.49Premium ® Oil Filters for Sportster ® and Big Twin ModelsShort FiltersFit all Sportster ® models from 1980-early 1984, and 4-speed Big Twin models (exceptSoftail ® models) with factory-installed spin-on oil filters from late 1982 thru 1986.26109 Chrome (replaces OEM 63782-80) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$8.1425543 Black (replaces OEM 63810-80) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$7.04Long FiltersFit 5-speed Shovelhead and Evolution ® Big Twin models (except Dyna Glide models)from 1980 thru 1998, Sportster ® models from late 1984 thru 2003, and all Softail ®models from 1984 thru 1999, as well as most Harley-Davidson ® accessory oil filter kits.25250 Chrome (replaces OEM 63796-77A) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$9.8925542 Black (replaces OEM 63805-80) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$9.19Extra-Long FiltersFit all Dyna Glide models from 1991 thru 1998, Sportster ® models from late 1984 thru2003, and all Big Twin models from 1992 thru 1999 (except Twin Cam 88 ® models).25221 Chrome (replaces OEM 63813-90) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$9.5925220 Black (replaces OEM 63812-90) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$8.69270449270447270448Chrome RevTech ® High-PerformanceMagnetic Oil FiltersEach filter has a magnetic ring tower in the center of thefilter to remove metal particles under 10 microns whichmight have travelled through the filter wall. They alsohave built-in, correctly-calibrated pressure relief valves andone-piece cans with fully-rolled and safety-crimped edges toprotect against leakage. These high-performance RevTech ® oilfilters have more paper folds than our Premium ® spin-onoil filters resulting in 30% more filtering surface andthe filter paper lasts 30% longer. Great for those highperformanceand stock motors.Short FilterFits all Sportster ® models from 1980-early 1984, and 4-speedBig Twin models (except Softail ® models) with factory installedspin-on oil filters from late 1982 thru 1986.35077 Replaces OEM 63782-80 . . . . . . . . . . . . . . . . . . . . . . .$10.84Long FiltersFit all 5-speed models (except Evolution ® Dyna Glide models)from 1980 to present, V-Rod ® models from 2002 to present,Sportster ® models from late 1984 thru 2003, and all Softail ®models from 1984 to present, as well as most Harley-Davidson ®accessory oil filter kits.35074 Fits Twin Cam 88 ® models(replaces OEM 63798-99) . . . . . . . . . . . . . . . . . . . . . .$16.0935078 Fits Sportster ® and Big Twin models(replaces OEM 63796-77A) . . . . . . . . . . . . . . . . . . . . .$13.64625224 Fits V-Rod ® models (replaces OEM 63793-01) . . .$12.99Extra-Long FilterFits all Dyna Glide models from 1991 thru 1998, Sportster ®models from late 1984 thru 2003, and all Big Twin modelsfrom 1992 thru 1999 (except Twin Cam 88 ® models).35079 Replaces OEM 63813-90 . . . . . . . . . . . . . . . . . . . . . . .$14.49Chrome Magnetic Oil Filters• Internal magnet removes tiny ferrous particles under 10 microns• Low restriction high density filter material for dependability• Built-in internal pressure release valve• Increased filter element area for maximum flowShort filter for all Sportster ® models from 1980-early 1984, and 4-speed Big Twin models(except Softail ® models) with factory installed spin-on oil filters from late 1982 thru 1986.270447 Replaces OEM 63782-80 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$9.99Long filter for 5-speed Shovelhead and Evolution ® Big Twin models (except Dyna Glidemodels) from 1980 thru 1998, Sportster ® models from late 1984 thru 2003, and all Softail ®models from 1984 thru 1999, as well as most Harley-Davidson ® accessory oil filter kits.270448 Replaces OEM 63796-77A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$11.66Extra-long filter for all Dyna Glide models from 1991 thru 1998, Sportster ® modelsfrom late 1984 thru 2003, and all Big Twin models from 1992 thru 1999 (exceptTwin Cam 88 ® models).270449 Replaces OEM 63813-90 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$16.9116.114Prices appearing in this catalog are Suggested Retail Price and are subject to change*

Oil FiltersApparelBike Kits& Trailers29264Seats& BagsFootControlsHandControls2926127012629262629265‘Performance Gold’ Oil Filters with TÜV by K&NThese oil filters were designed for high-performance engines and syntheticoils. They feature a 17mm wrench nut for easy service in which the nut isdrilled for safety wire security. Other features include thick-wall construction,strong inner cores, heavy base plates with double rolled seals andimproved pressure relief valves. The check valve prevents oil drainbackand dry starts. The modern synthetic-blend filter media catches more dirt,while still permitting more flow with less pressure drop, and is unaffectedby racing fuels. Sold each.Short FilterFits all Sportster ® models from 1980-early 1984, and 4-speed Big Twinmodels (except Softail ® models) with factory installed spin-on oil filtersfrom late 1982 thru 1986.29261 Chrome (replaces OEM 63782-80) . . . . . . . . . . . . . . . . . . . . . . . . . . .$12.74Long FilterFit all Twin Cam 88 ® models from 1998 to present, as well as all 5-speedmodels (except Dyna Glide models) from 1980 to present, late 1984 thru2003 Sportster ® and Buell ® models, and all Softail ® models from 1984 topresent, as well as most Harley-Davidson ® accessory oil filter kits.29262 Chrome with Anti Drain Back Valve (repl. OEM 63796-77A) . . .$12.74629265 Chrome without Anti Drain Back Valve . . . . . . . . . . . . . . . . . . . . . .$13.95270126 Black with Anti Drain Back Valve (replaces OEM 63805-80) . . .$13.49Extra-Long FilterFits all Dyna Glide models from 1991 thru 1998, Sportster ® modelsfrom late 1984 thru 2003, and all Big Twin models from 1992 thru1999 (except Twin Cam 88 ® models).29264 Chrome (replaces OEM 63813-90) . . . . . . . . . . . . . . . . . . . . . . . . . . .$14.29Motor Factory ® American Made Chrome Oil FiltersExclusively from Custom Chrome ® , these Motor Factory ® oil filters incorporatestate-of-the-art filtration technology and production techniques.A special synthetic microglass enhanced material holds more dirt withoutincreasing flow restriction and greatly increases the filters efficiency inthe 4 to 22 micron range, the size most effective in reducing engine wear.Motor Factory ® filters are display packaged for maximum visibility and includepressure relief valves and flow rates correctly calibrated to the correctspecifications. Available for most models from 1953 thru 1999.Short FilterFits all Sportster ® models from 1980-early 1984, and 4-speed Big Twinmodels (except Softail ® models) with factory installed spin-on oil filtersfrom late 1982 thru 1986.270431 Chrome (replaces OEM 63782-80) . . . . . . . . . . . . . . . . . . . . . . . . . .$12.79Long FilterFits 5-speed Shovelhead and Evolution ® Big Twin models (except Dyna Glidemodels) from 1980 thru 1998, Sportster ® models from late 1984 thru 2003,and all Softail ® models from 1984 thru 1999, as well as most Harley-Davidson ®accessory oil filter kits.270433 Chrome (replaces OEM 63796-77A) . . . . . . . . . . . . . . . . . . . . . . . .$13.19Drop-In FilterFits most models with in-tank filters from 1953 thru 1983. Replaces themessy Original Equipment cup and retainer systems with a simple one-piecedrop-in unit.270438 Sold each (replaces OEM 63840-53) . . . . . . . . . . . . . . . . . . . . . . . . .$7.59LightingElectricalExhaustIntakeEngineGasketsTranny& ClutchDrivelinePerf-form Oil FiltersTop quality, made in U.S.A. black or chrome spin-on filters for models from1980 thru 2003. The large filter is one inch longer-than-stock to increase theoil capacity of the system and permit the oil filter to help cool the oil. Theshort filter features 24 square inches more pleated filter paper than comparablefilters, and an anti-drain back valve not found on most other filters.Short FiltersFits all Sportster ® models from 1980-early 1984, and 4-speed Big Twinmodels (except Softail ® models) with factory installed spin-on oil filtersfrom late 1982 thru 1986.25541 Black (replaces OEM 63810-80) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$9.6925529 Chrome (replaces OEM 63782-80) . . . . . . . . . . . . . . . . . . . . . . . . . . .$11.89Long FiltersFits 5-speed Shovelhead and Evolution ® Big Twin models (except Dyna Glidemodels and 1987-up Softail ® models) from 1980 thru 1998, Sportster ® modelsfrom late 1984 thru 2003, all Softail ® models from 1984 thru 1986, as wellas most Harley-Davidson ® accessory oil filter kits.25546 Black (replaces OEM 63805-80) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$9.7925528 Chrome (replaces OEM 63796-77A) . . . . . . . . . . . . . . . . . . . . . . . . . . .$11.89Wheels,Tires& BrakesFramesForks& ShocksSheetmetalGeneralFor the Dealer Nearest You, Call: 800-729-333216.115CrossReference

Oil FiltersU.S. Patent #4,935,128Replaces All ThisPerf-form Oil FilterQuick change, easy-to-install one-piece oil filterfor most models from 1953 thru 1983 within-tank filters. Replaces the stock fiber elementwith a pleated paper element. . . . . . . . . . . . .$7.1925545 Replaces OEM 63840-53C.C. Rider ® Drop-In Oil FilterFeatures a permanently lubricated relief valvewith all-steel construction and 12% more filtermedia than other similar filters. The automotive-qualityimpregnated paper element ismuch more effective in particulate filtrationthan the stock fiber element, and superior in itsresistance to acid build-up. Pleated paper elementwithin a plated screen allows the entireoil flow to be forced thru instead of just over itssurface during high oil pressure situations likestart-up and acceleration. This filter eliminatesthe mess associated with the OEM filter, andtakes only seconds to change. Fits most modelswith in-tank filters from 1953 thru 1983. . .$7.6925251 Replaces OEM 63840-53Dual Stage Super Filter Engineered like no other, the SUPER FILTERfrom Custom Chrome ® incorporates an exclusiveDUAL STAGE filtration system that’s actuallytwo filters in one. Under normal conditions,STAGE ONE is at work. Its low restriction paperelement catches damaging particles that thestock fiber element can miss. Unlike otherdesigns that can let unfiltered oil flow directlyinto the tank, STAGE TWO continues to protectyour engine when others fail. When the SUPERFILTER’S bypass valve is activated, oil is divertedto a second filter for reliable protection untilthe next oil change. Available individually packagedin an attractive color box or with a pointof purchase counter top display. Fits most modelswith in-tank filters from 1953 thru 1983.270015 Each . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$9.49270017 Counter display carton of 24 . . . .$175.99Sheetmetal16Spin-On Super FiltersThese superior quality oil filters feature an internalpressure relief valve and our highest densityfilter material encased in a specially designed,maximum flow housing. Available with chromeor black finishes.Short FilterFit all Sportster ® models from 1980-early 1984,and 4-speed Big Twin models (except Softail ®models) with factory-installed spin-on oil filtersfrom late 1982 thru 1986.270020 Chrome (repl. OEM 63782-80) . . . . .$7.10Long FiltersFit 5-speed Shovelhead and Evolution ® Big Twinmodels (except Dyna Glide models) from 1980thru 1998, Sportster ® models from late 1984thru 2003, and all Softail ® models from 1984thru 1999, as well as most Harley-Davidson ®accessory oil filter kits.270000 Chrome (repl. OEM 63796-77A) . .$10.99270001 Black (repl. OEM 63805-80) . . . . . .$10.99Extra-Long FilterFit all Dyna Glide models from 1991 thru 1998,Sportster ® models from late 1984 thru 2003,and all Big Twin models from 1992 thru 1999(except Twin Cam 88 ® models).270028 Chrome (repl. OEM 63813-90) . . . . $8.85Filters for Twin Cam 88 ® ModelsFit Twin Cam 88 ® models from 1999 to present.270002 Chrome (repl. OEM 63798-99) . . . .$13.99270003 Black (repl. OEM 63731-99) . . . . . .$13.99Chrome Fram ® Oil FiltersMade to strict Fram specifications. Availablefor most Sportster ® and Big Twin models withspin-on oil filters. Sold each.Short FilterFit all Sportster ® models from 1980-early 1984,and 4-speed Big Twin models (except Softail ®models) with factory-installed spin-on oil filtersfrom late 1982 thru 1986.24923 Chrome filter, Fram #PH6068,(repl. OEM 63782-80) . . . . . . . . . . . .$16.74Long FilterFit 5-speed Shovelhead and Evolution ® Big Twinmodels (except Dyna Glide models) from 1980thru 1998, Sportster ® models from late 1984thru 2003, and all Softail ® models from 1984thru 1999, as well as most Harley-Davidson ®accessory oil filter kits.24924 Chrome filter, Fram #PH6065A,(repl. OEM 63796-77A) . . . . . . . . . . .$15.59Extra-Long FilterFit all Dyna Glide models from 1991 thru 1998,Sportster ® models from late 1984 thru 2003,and all Big Twin models from 1992 thru 1999(except Twin Cam 88 ® models).24925 Chrome filter, Fram #PH6019,(repl. OEM 63813-90) . . . . . . . . . . . . $12.492554712272Premium ® Replacement Oil FiltersFilters do not include upper or lower seals.12272 1954 thru 1983 models with filter in oiltank (repl. OEM 63840-53) . . . . . . . .$2.4925547 1940 thru 1963 models with externaloil filter (repl. OEM 63840-48A) . . .$3.2916.116Prices appearing in this catalog are Suggested Retail Price and are subject to change*