protecta iii - Gunneman

PROTECTA III E24Ex e EMERGENCYFLUORESCENTUtilising the same reliable design of the standard Protecta III, the emergency version also features intelligent batteryand lamp management technology. The luminaire is capable of self commissioning and routine self-testingto ensure safe and dependable emergency operation.A high emergency output version is also available that increases the lumen output in emergency mode.Standard SpecificationFeaturesType of ProtectionATEX ClassificationArea ClassificationCertificateCodingEnclosureReflector/GeartrayEntryTerminationInstallationControl GearRelampingLampholderBurning PositionIngress ProtectionElectrical SupplyBatteryDurationEmergency OutputEx e mb q (Increased safety EncapsulationPowder filling)Group II Category 2 GDZone 1 and 21 areas to EN 60079-10-1 andEN 60079-10-2 with installation to EN 60079-14EC Type Examination CertificateBaseefa04ATEX0220II 2 GD Ex e mb q IIC T4 Tamb 55°CGRP body with polycarbonate coverand brass suspension pointsWhite polyester painted zinc coated steel4 x M20 cable entries, 2 at each endQuick release mains terminals - 4 core 4mm² max.conductor with looping and 16A ratingthrough wiring. (6mm² terminations available -/SC option)Two M8 tapped brass inserts locatedon rear of bodyHigh FrequencyQuick release diffuser clamp and hinged coverG13 (Bi-pin)UniversalIP66/67 to EN 60529220V - 254V 50/60HzInternal Ni-Cd (6V)90 minutes to EN 60598-2-2250% of one lamp (18W)25% of one lamp (36W)Ability to detect and indicate impendingend of emergency lamp life beforeactual failureBattery management, monitoringand automatic self testEmergency inhibition and mainspower off re-startAutomatic lamp de-energisationon openingDTS-01 deluge testedVibration tested to comply withLloyds/DNVEnd of life (EOL) protectionto IEC 60079-7(with EOL I and EOL II functionality)International ApprovalsATEX, GB (China), GOST, CSA and CEPELIECEx Compliant