Crown Casing Heads CC-22 Casing Head - Stream Flo

Crown Casing Heads CC-22 Casing HeadTechnical Data 1-2top flangeoutletbottom connectionThe Crown CC-22 casing head has a straight bore one-stepbowl design with a large chamfer on the top. This headaccepts either the Crown CC-22 automatic casing hangerwhich combines slips, slip bowl and packing into a singleunit, or the Crown CC-21 casing hanger and separatefloating primary packoff.If a bowl protector is required, the Crown CC-22-BPdesign is recommended. It has two lock screws in the topflange to retain the bowl protector. A hold-down flangewith lock screws can be furnished for use on CC-22casing heads.The CC-22-L has multiple lockdown screws in the topflange to be used for retaining a mandrel hanger or bowlprotector.Main Design and Construction FeaturesBottom Connection: The standard bottom connection is aslip-on weld or female casing thread. Other connectionsavailable are slip lock or male casing head.Top Connection: The top conection of a Crown casing headis an API 6A flange. A clamp-hub connection is available.Side Outlets: The standard casing head has two 2” APIline pipe female thread side outlets. Studded, extendedflanged or clamp hub outlets are also available. Thestudded and flanged outlets have valve removal threads.Combinations of outlet types are available.streamflo.com CC-22 Casing HeadLIT_TEC_1014

Crown Casing Heads CC-22 Casing Head Technical Data 2-2Dimensional DataTop FlangeSizeWP Top FlangeBottomConnectionOutlets*MinimumBoreMax SuspendedCasing SizeApproximateHeight11 (279.4) 2000 (13.8 MPa) 8 5 /8“ (219.1) 2” LP (50.8) 8 (203.2) 7 (177.8) 17.4 (442)11 (279.4) 3000 (20.7 MPa) 8 5 /8“ (219.1) 2” LP (50.8) 8 (203.2) 7 (177.8) 17.1 (434)11 (279.4) 5000 (34.5 MPa) 8 5 /8“ (219.1) 2” LP (50.8) 8 (203.2) 7 (177.8) 21.6 (549)11 (279.4) 2000 (13.8 MPa) 9 5 /8 “ (244.5) 2” LP (50.8) 9 (228.6) 7 5 /8“ (193.7) 17.4 (442)11 (279.4) 3000 (20.7 MPa) 9 5 /8“ (244.5) 2” LP (50.8) 9 (228.6) 7 5 /8“ (193.7) 17.1 (434)11 (279.4) 5000 (34.5 MPa) 9 5 /8“ (244.5) 2” LP (50.8) 9 (228.6) 7 5 /8“ (193.7) 21.6 (549)11 (279.4) 2000 (13.8 MPa) 10 3 /4“ (273.0) 2” LP (50.8) 9.9 (254.0) 8 5 /8” (219.1) 17.4 (442)11 (279.4) 3000 (20.7 MPa) 10 3 /4“ (273.0) 2” LP (50.8) 9.9 (254.0) 8 5 /8” (219.1) 17.1 (434)11 (279.4) 5000 (34.5 MPa) 10 3 /4“ (273.0) 2” LP (50.8) 9.9 (254.0) 8 5 /8” (219.1) 21.6 (549)13 5 /8” (346.1) 2000 (13.8 MPa) 11 3 /4” (298.4) 2” LP (50.8) 11 (279.4) 9 5 /8” (244.5) 18.6 (472)13 5 /8” (346.1) 3000 (20.7 MPa) 11 3 /4“ (298.4) 2” LP (50.8) 11 (279.4) 9 5 /8” (244.5) 18.6 (472)13 5 /8” (346.1) 2000 (13.8 MPa) 13 3 /8“ (339.7) 2” LP (50.8) 12 1 /2“ (317.5) 9 5 /8” (244.5) 18.6 (472)13 5 /8” (346.1) 3000 (20.7 MPa) 13 3 /8“ (339.7) 2” LP (50.8) 12 1 /2“ (317.5) 9 5 /8” (244.5) 18.6 (472)13 5 /8” (346.1) 5000 (34.5 MPa) 13 3 /8“ (339.7) 2” LP (50.8) 12 1 /2“ (317.5) 9 5 /8” (244.5) 21.6 (549)16 3 /4” (425.5) 2000 (13.8 MPa) 16 (406.4) 2” LP (50.8) 15 1 /4“ (387.4) 10 3 /4” (273.0) 19.1 (485)16 3 /4” (425.5) 3000 (20.7 MPa) 16 (406.4) 2” LP (50.8) 15 1 /4“ (387.4) 10 3 /4” (273.0) 19.1 (485)16 3 /4” (425.5) 5000 (34.5 MPa) 16 (406.4) 2” LP (50.8) 15 1 /4“ (387.4) 10 3 /4” (273.0) 18.9 (480)21 1 /4” (539.8) 2000 (13.8 MPa) 20 (508.0) 2” LP (50.8) 19 3 /16“ (487.4) 13 3 /8“ (339.7) 20.4 (518)20 3 /4” (527.1) 3000 (20.7 MPa) 20 (508.0) 2” LP (50.8) 19 3 /16“ (487.4) 13 3 /8“ (339.7) 20.4 (518)* Also available with flanged or studded side outlets. Millimetres are in brackets.When ordering Crown Casing Heads, please specify the following information:1) Crown model2) Bottom connection: slip-on weld, female thread or male thread; casing size3) Top connection: flange or clamp hub; size; working pressure4) Side outlets: threaded or studded; size5) Standard or H 2 S service6) Equipment to be used off outlets7) Options required: lockdown screws; landing base8) PSL requirement9) API material class10) API temperature ratingAvailable to meet all appropriate API-6A requirements.streamflo.com CC-22 Casing Head