equipment sourcebook - Loctite.ph

O-Ring FabricationO-RINGFABRICATIONHenkel has introduced our new Loctite® Precision O-Ring Cut and Splice Tool thatturns industrial o-ring cord stock into precise o-rings that are ready for use in a matterof seconds. Digital calipers ensure accurate and repeatable measurement to ensure thatyou get a correctly sized o-ring every time.PrecisionO-Ring KitLOCTITE ® PRECISION O-RING CUT AND SPLICE TOOLItem Number: 98613The Loctite® Precision O-Ring Cut and Splice Tool is a patentpending, industrial grade tool that provides precise measuring,cutting and bonding of both standard and metric o-ring cordstock. This tool offers a cost effective solution to creatingcustom o-rings from 1.05" to 4" (26 mm to 100 mm) indiameter. It incorporates a digital caliper for precisemeasurement with every o-ring you make. The scale displayseither standard or metric dimensions. The cutting fixture isdesigned to ensure clean, square cuts, while rugged holdingclamps provide seamless bonding of the cord stock.Features:• Digital caliper provides precise measurementdown to 0.01 mm resolution• Measurements can be either in inches or mm• Convenient conversion chart provides cord stocklength vs. required o-ring diameter• Gold plated cutting blade ensures clean cuts and longer life• Accommodates cord stock up to 1 ⁄4" (7 mm) in diameter• Acetal Copolymer holding clamps are rugged andresist any adhesive build-upTheory of OperationO-ring cord stock is placed through the cutting blade assemblyand securely attached to the first holding clamp on the slidingdigital caliper assembly. The caliper is then extended from azero point away from the cutting face to the precise distancethat will equate to the o-ring diameter required. The cuttingblade is then manually engaged to cut the exact length of cord.The loose end of cord stock is now attached to the 2nd holdingclamp that properly aligns both ends to each other. Loctite®404 Quick Set Instant Adhesive (available as part of kits andalso sold separately) is applied and both ends are broughttogether making a perfect o-ring bond in just a few seconds.DimensionsWeightPowerO-Ring DimensionsParts IncludedThe Starter Kit and Splice Tool are sold separately.TECHNICAL SPECIFICATIONS17.25" L x 6.125" W x 4.75" H2.8 lbs.Digital Scale uses Button Cell SR44, 1.55 VMaximum Diameter Cord Stock Diameter: 1 ⁄4" (7 mm)O-Ring Diameter Range: 1.05" to 4.0"Scale Resolution: 0.01 mm(1) O-Ring Cut and Splice Tool (1) Manual (1) Instruction SheetAdditional Accessories Sold Separately8900513 –Loctite ® PrecisionO-Ring Starter KitParts Included: (1 each) 3' O-Ring Stock, 0.093",0.125", 0.187" and 0.25" Diameter(1) 75326 – Loctite ® Clean-Up Solvent(1) 74126 – Loctite ® Water Proofing Solution(1) 46551 – Loctite ® 404 Quick Set Instant AdhesiveLoctite ® O-Ring Replacement Cord Stock(All Buna-N, 5 ft. length)909395 – 0.093" diameter909394 – 0.125" diameter909396 – 0.187" diameter909393 – 0.250" diameterFor additional information and the full line of equipment, visit www.equipment.loctite.com.97