equipment sourcebook - Loctite.ph

More documents

Recommendations

Info

FUMEFILTRATIONFume Filtration SystemSystemBENCHTOP FUME FILTRATION SYSTEMItem Number: 98277The Benchtop Fume Filtration System is designed toremove dust particulate and fumes emitted byadhesives, sealants, cleaning solvents, and otherchemicals. This compact system offers flexibleoperation in a small space and matches the airflowof many larger systems. It features quiet operationand a bi-colored LED light to indicate blocked filters.This unit can be operated as an open plenum fora working area up to 12" wide or can easily beconverted into an arm system for more direct fumecapture. The 2" x 24" flexible arm can be positionedto be unobtrusive to the operator, yet provideeffective air filtration. It is equipped with a DeepBed Activated Carbon Fume Filter. HEPA/CarbonFilters are available separately.Features:• High airflow rates• Runs quietly• LED light indicates blocked filter• Efficient arm or plenum applicationsprovide flexibility• Compact, space-saving footprint• UL, CSA, and CE compliantInstallation OverviewThis filtration system filters fumes emittedfrom adhesives, sealants, cleaning solvents,and other chemicals, as well as dustparticulate from other sources.Recommended Spare Parts987200 – Filter, Pre-Filter (set of 5)987201 – Filter, Deep Bed CarbonAir Inlet PortsFan CapacitySystem CapacityMaximum Static PressurePower SupplyMotor RatingPower ConsumptionNoise Level, Approx.TECHNICAL SPECIFICATIONS2" Diameter x 24" Long or 12" Plenum50 cfm50 cf5 inches of water90/264 VAC; 50/60 Hz0.11 HP; 85 watt1 amp55 dBADimensions (W x D x H) 12" x 10.4" x 11.75"WeightPowerApprovalsParts IncludedAdditional AccessoriesSold Separately15.4 lbs.On/off switch withpower indicator lightUL, CSA, CE(1) Fume Filtration System (1) Pleated Pre-Filter (1) Manual(1) Deep Bed Activated Carbon Fume Filter (1) Power Cable987364 – HEPA / Carbon Filter 987366 – Exhaust Arm987365 – Arm Adapter 987367 – Arm Nozzle, 40 mm96For additional information and the full line of equipment, visit www.equipment.loctite.com.
O-Ring FabricationO-RINGFABRICATIONHenkel has introduced our new Loctite® Precision O-Ring Cut and Splice Tool thatturns industrial o-ring cord stock into precise o-rings that are ready for use in a matterof seconds. Digital calipers ensure accurate and repeatable measurement to ensure thatyou get a correctly sized o-ring every time.PrecisionO-Ring KitLOCTITE ® PRECISION O-RING CUT AND SPLICE TOOLItem Number: 98613The Loctite® Precision O-Ring Cut and Splice Tool is a patentpending, industrial grade tool that provides precise measuring,cutting and bonding of both standard and metric o-ring cordstock. This tool offers a cost effective solution to creatingcustom o-rings from 1.05" to 4" (26 mm to 100 mm) indiameter. It incorporates a digital caliper for precisemeasurement with every o-ring you make. The scale displayseither standard or metric dimensions. The cutting fixture isdesigned to ensure clean, square cuts, while rugged holdingclamps provide seamless bonding of the cord stock.Features:• Digital caliper provides precise measurementdown to 0.01 mm resolution• Measurements can be either in inches or mm• Convenient conversion chart provides cord stocklength vs. required o-ring diameter• Gold plated cutting blade ensures clean cuts and longer life• Accommodates cord stock up to 1 ⁄4" (7 mm) in diameter• Acetal Copolymer holding clamps are rugged andresist any adhesive build-upTheory of OperationO-ring cord stock is placed through the cutting blade assemblyand securely attached to the first holding clamp on the slidingdigital caliper assembly. The caliper is then extended from azero point away from the cutting face to the precise distancethat will equate to the o-ring diameter required. The cuttingblade is then manually engaged to cut the exact length of cord.The loose end of cord stock is now attached to the 2nd holdingclamp that properly aligns both ends to each other. Loctite®404 Quick Set Instant Adhesive (available as part of kits andalso sold separately) is applied and both ends are broughttogether making a perfect o-ring bond in just a few seconds.DimensionsWeightPowerO-Ring DimensionsParts IncludedThe Starter Kit and Splice Tool are sold separately.TECHNICAL SPECIFICATIONS17.25" L x 6.125" W x 4.75" H2.8 lbs.Digital Scale uses Button Cell SR44, 1.55 VMaximum Diameter Cord Stock Diameter: 1 ⁄4" (7 mm)O-Ring Diameter Range: 1.05" to 4.0"Scale Resolution: 0.01 mm(1) O-Ring Cut and Splice Tool (1) Manual (1) Instruction SheetAdditional Accessories Sold Separately8900513 –Loctite ® PrecisionO-Ring Starter KitParts Included: (1 each) 3' O-Ring Stock, 0.093",0.125", 0.187" and 0.25" Diameter(1) 75326 – Loctite ® Clean-Up Solvent(1) 74126 – Loctite ® Water Proofing Solution(1) 46551 – Loctite ® 404 Quick Set Instant AdhesiveLoctite ® O-Ring Replacement Cord Stock(All Buna-N, 5 ft. length)909395 – 0.093" diameter909394 – 0.125" diameter909396 – 0.187" diameter909393 – 0.250" diameterFor additional information and the full line of equipment, visit www.equipment.loctite.com.97
Page 1 and 2:
theequipmentsourcebook2007volume 6
Page 3 and 4:
Table of ContentsINTRODUCTIONEQUIPM
Page 6 and 7:
Equipment ServiceSolutionsINTRODUCT
Page 8 and 9:
Dispense SystemsDISPENSINGVOLUMETRI
Page 10 and 11:
DISPENSINGDispense SystemsLOCTITE
Page 12 and 13:
DISPENSINGDispense SystemsLoctite
Page 14 and 15:
DISPENSINGDispense SystemsLOCTITE
Page 16 and 17:
Dispense SystemsDISPENSINGTUBE BOND
Page 18 and 19:
Controllers &ReservoirsDISPENSINGMU
Page 20 and 21:
Controllers &ReservoirsDISPENSINGSI
Page 22 and 23:
Controllers &ReservoirsDISPENSINGRE
Page 24 and 25:
Controllers &ReservoirsDISPENSINGLO
Page 26 and 27:
DISPENSINGBOTTLE DISPENSINGLOCTITE
Page 28 and 29:
Hand HeldApplicatorsDISPENSINGLOCTI
Page 30 and 31:
Hand HeldApplicatorsDISPENSINGLOCTI
Page 32 and 33:
DISPENSINGTwo-Part VolumetricDispen
Page 34 and 35:
DISPENSINGTwo-Part Volumetric Dispe
Page 36 and 37:
Two-Part VolumetricDispensingMeter
Page 38 and 39:
Two-Part VolumetricDispensingMeter
Page 40 and 41:
DISPENSINGLoctite® DuraPump Select
Page 42 and 43:
DISPENSINGLoctite® Brand Meter Mix
Page 44 and 45:
DISPENSINGVariable Ratio Systems fo
Page 46 and 47:
DISPENSINGHand Held HotMelt Applica
Page 48 and 49: DISPENSINGHand Held HotMelt Applica
Page 50 and 51: Hand Held HotMelt ApplicatorsDISPEN
Page 52 and 53: DISPENSINGBulk Hot Melt SystemsBulk
Page 54 and 55: Bulk Hot MeltSystemsDISPENSINGLOCTI
Page 56 and 57: Bulk Hot MeltSystemsDISPENSINGLOCTI
Page 58 and 59: DISPENSINGLoctite® Brand Extrusion
Page 60 and 61: DISPENSINGHand Held ValvesHand Held
Page 62 and 63: Hand Held ValvesDISPENSINGGENERAL P
Page 64 and 65: Hand Held ValvesDISPENSINGPINCH TUB
Page 66 and 67: DISPENSINGValves & PumpsValves & Pu
Page 68 and 69: Valves & PumpsDISPENSINGLOCTITE ®
Page 70 and 71: DISPENSINGValves & PumpsGENERAL DUT
Page 72 and 73: Valves & PumpsDISPENSINGHIGH VISCOS
Page 74 and 75: DISPENSINGValves & PumpsPOSITIVE DI
Page 76 and 77: Valves & Pumps DISPENSINGLoctite®
Page 78 and 79: DISPENSINGPail PumpsLOCTITE ® HIGH
Page 80: DISPENSINGMonitoring SystemsMonitor
Page 83 and 84: Tapered Dispense Tips1 1 ⁄4" POLY
Page 85 and 86: Loctite® Brand Syringe Accessories
Page 87 and 88: AccessoryPARENT PRODUCTItem Numbers
Page 89 and 90: LOCTITE ® 200 BENCHTOP ROBOT STATI
Page 91 and 92: LOCTITE ® 400 BENCHTOP ROBOT STATI
Page 93 and 94: LOCTITEHeading ® S440 SERIES SCARA
Page 95 and 96: MOTIONCONTROLLOCTITE ® ADVANCING S
Page 97: Loctite® Brand Mounting Hardware,W
Page 101 and 102: LIGHT CURE SolutionsPRODUCTItemNumb
Page 103 and 104: LOCTITE ® 7700-HD LED LIGHT SOURCE
Page 105 and 106: Wand SystemsLoctite® ZETA® light
Page 107 and 108: LOCTITE ® ZETA ® 7735 UV WAND SYS
Page 109 and 110: LOCTITE ® ZETA ® 7760 UV WAND SYS
Page 111 and 112: LOCTITE ® ZETA ® 7401 UV CHAMBERI
Page 113 and 114: LIGHT CURE Cure Chambers &Flood Sys
Page 115 and 116: Light MetersDecreased radiant power
Page 117 and 118: Cure ConveyorsLoctite® brand cure
Page 119 and 120: Light SourcesOur light sources and
Page 121 and 122: Index119INDEXFor additional informa
Page 123 and 124: 121INDEXFor additional information
Page 125 and 126: 123INDEXFor additional information
Page 127: 125INDEXFor additional information
show all

equipment sourcebook - Loctite.ph

Create successful ePaper yourself

Delete template?

Save as template?