equipment sourcebook - Loctite.ph

More documents

Recommendations

Info

MOTIONCONTROLDispense StationsLOCTITE ® SINGLE ROTARY DISPENSE STATIONItem Number: 98427The Loctite® Single Rotary Dispense Station is used for repetitive dispensing of circles, arcsand/or dots in a circular pattern that also requires motion in the z-axis. It is a fully integratedsystem that will control a syringe, cartridge or dispense valve. No separate dispense controlleris required. The programming is menu driven using a multi-line, back-lit display. The rugged,all-metal construction is designed for tough manufacturing environments.LOCTITE ® DUAL ROTARY DISPENSE STATIONItem Number: 98428The Loctite® Dual Rotary Dispense Station is used for repetitive dispensing of circles, arcsand/or dots in a circular pattern on two simultaneously controlled stations. It is a fullyintegrated system that will control a syringe, cartridge or dispense valve. No separate dispensecontroller is required. The programming is menu driven using a multi-line,back-lit display. Installation and integration with a dispense syringe,cartridge or valve is very simple, only requiring a mountingbracket and several pneumatic connections. The rugged, all-metalconstruction is designed for tough manufacturing environments.Features for Rotary Dispense Stations:• Integrated solution – plug and play• Compact size• Easy to program with menu driven prompts• Robust slide design• Stroke adjustment 0 to 2"• Adjustable height, position and angle of dispense point• Rugged, all-metal enclosure• Vacuum suck-back to eliminate drips when syringe dispensing• Auto repeat mode cycles unit continuously without foot switch• Wide variety of mounting hardware availableProgrammingSimple to program using a multi-line, back-lit user interfacepanel with user friendly prompts. It is possible to enter 10programs consisting of full circles, dots and/or arcs. Each ofthese dispense patterns is considered an “event” and there canbe twenty events per program. For each event, the user specifiesthe start and end coordinates in degrees (determined in set upmode), the rotating speed, the delay after the slide advances butbefore dispensing starts, and the delay after dispensing beforeretracting the slide. Programs can be initiated using either afoot switch or the start button. When this occurs, a completeprogram cycle is executed. The table rotates using a steppermotor that allows the location to be specified within 0.1 degree.Required Separate Purchases• Dispense valve, syringe adapter, or cartridge adapter• Mounting bracket• Dispense needles• Fixture to locate part(s)• Tubing for connecting valve(s) and air in98428 – Loctite ® Dual RotaryDispense Station with a 90° set upTECHNICAL SPECIFICATIONS98427 – Loctite ® SingleRotary Dispense Station98428 – Loctite ® Dual RotaryDispense Station with a 45° set upAttribute 98427 98428Dispense PatternCircles, Arcs and/or Dots in a Circular PatternNumber of Dispense Points 1 2Rotating Speed 0.1 to 100 RPM 0.1 to 100 RPMSlide Stroke 0 to 2" 0 to 2"Maximum Part Height 1* 12" 8" at 90°Maximum Part Size 1*8.5" Diameter4" Diameter at 90°6" Diameter at 45°Width 14.1" 14.1"Dimensions Depth 11.6" 11.6"Height 28.7" 23.9"Weight 26 lbs. 25 lbs.Weight Capacity 2* 30 lbs. 30 lbs.Air InputClean, dry air not to exceed 125 psig and filteredwith a maximum of 50 micronsAir Output 0 to 100 psi 0 to 100 psiPower Source110/220 VAC; 50/60 HzProgram Capacity 10 10ProgrammingMulti-Line Digital Control Panel with User Friendly PromptsParts Included(1) Rotary Dispense Station(1) Fitting Kit for Dispenser Connection(1) Foot Switch (1) Power Cord (1) ManualAdditional Information For Valve Dispensing, see pages 64-74.For Syringe Dispensing, see page 83.For Mounting Hardware, see page 95.For Dispensing Tips, see pages 80-817.* For explanation of notes 1 and 2, please refer to notesbelow the chart on page 92.94For additional information and the full line of equipment, visit www.equipment.loctite.com.
Loctite® Brand Mounting Hardware,Workbenches, and GuardingEnclosuresMOUNTING BRACKET KITS – Mounting bracket kits are usedto grasp syringe barrels, Loctite® Posi-Link syringe and dualcartridge nests, 300 ml cartridges, dispense valves, and LEDs.Mounting rails or adapters are required to mount the bracketson the robot or dispense station.Item #Description98316 30 ml syringe mounting bracket kit98318 300 ml cartridge mounting bracket kit98326 98009 and 98013 valve mounting bracket kit98327 97113 and 97114 valve mounting bracket kit98406 983914 and 986300 poppet valve mounting bracket kit9844198520 spray and 98084 micro needle valvemounting bracket kitTIP LOCATOR BRACKETS* – Tip locator brackets position thedispense tip to increase precision and are used to mechanically setthe tip height during installation. A mounting bracket and rail,plate or adapter must be purchased separately.Item #Description98332 Tip locator bracket for 30 ml syringes98333 Tip locator bracket for 300 ml cartridges98334 Tip locator bracket for 98009 and 98013 valves98335 Tip locator bracket for 97113 and 97114 valves98407 Tip locator bracket for 983914 and 986300 poppet valve* These are sized for 1", 25 gauge stainless steel needles andmust be modified by the user for larger gauge sizes.Z HEIGHT ADJUSTMENT PLATE FOR 3 AXIS BENCHTOP ROBOTSThis plate allows you attach the mounting rails above orbelow the mounting bracket on the robot.MOTIONCONTROLDispense Stations98646 Universal syringe bracket for Posi-Link 98647 50 ml dual cartridge bracket for Posi-Link 98669 98591 and 98595 LED mounting bracket kit3, 5 AND 10 ML SYRINGE ADAPTERS – These adapters areinserted into the 30 ml syringe mounting bracket kit to adapt itfor 3, 5 and 10 ml syringes. The 30 ml syringe mounting bracket(item 98316) must be purchased separately.Item #Description98357 Z height adjustment plate929541Z height adjustment plate - Posi-Link 200-400 NestsMOUNTING RAILS FOR 3 AXIS BENCHTOP ROBOTS ANDDISPENSE STATIONS – A mounting rail is required when usingLoctite® brand mounting hardware for all 3 axis BenchtopRobots and Dispense Stations.Item #DescriptionItem #Description98320 10 ml adapter for use with 9831698321 5 ml adapter for use with 9831698322 3 ml adapter for use with 9831698328 3 3 ⁄4 inch bar with two cap screws98329 8 3 ⁄4 inch bar with two cap screws98330 12 inch bar with two cap screwsMOUNTING ADAPTER FOR ALL 4 AXIS ROBOTS –A mounting adapter is required when usingLoctite® brand mounting hardware for all 4 axisrobots. The mounting adapter includesa 360 degree rotation kit.Item #Description98336 Mounting adapter for 4 axis robots360 DEGREE ROTATION KIT – This is used to allow for 360degrees of rotation when using a mounting bracket kit or tiplocator. A 360 degree rotation kit is already included withthe mounting adapter for 4 axis robots.Item #Description98325 360 degree rotation kitCOMPLETE MOUNTING KITS FOR 3 AXIS SCARA ROBOTS*Complete mounting adapter kits hold the syringe,cartridge or valve, and position the dispense tip60 mm from the end of the tool arm.Item #Description98340 30 ml syringe holder98341 300 ml cartridge holder98342 98009 and 98013 valve holder98343 97113 and 97114 valve holder98408 983914 and 986300 poppet valve holder* These are sized for 25 gauge needles and must bemodified by the user for larger gauge sizes.MOUNTING PLATE FOR 3 AXIS SCARA ROBOTS – A mountingplate is required when using Loctite® brand mountinghardware for all 3 axis SCARA Robots (except whenusing a complete mounting kit).Item #Description98337 Mounting plate for SCARA robotWORKBENCHES• Strong and sturdy workbenches• Accomodate all Loctite ® brand robotsGUARDING SYSTEMS – For Plants requiringhigher safety levels• Light Curtain or Interlocked Sliding Door* on front• Sturdy extruded aluminum frame• Polycarbonate panels on left, right and rear• Operator control panel mounted on front right• Direct plug-in to robots* Interlocked door model for Benchtop units onlyItem # Description Dimensions989783 200 Series Workbench 36" W x 24" D x 36" H989784 300 Series Workbench 42" W x 30" D x 36" H989785 400/500 Series Workbench 48" W x 36" D x 36" H989860 SCARA Series Workbench 48" W x 48" D x 36" H989787 200 Series Slide Door 22" W x 24" D x 27" H989763 200 Series Light Curtain 22" W x 24" D x 27" H989788 300 Series Slide Door 30" W x 30" D x 30" H989771 300 Series Light Curtain 30" W x 30" D x 30" H989789 400/500 Series Slide Door 32" W x 36" D x 35" H989777 400/500 Series Light Curtain 32" W x 36" D x 35" H989852 SCARA Light Curtain 48" W x 48" D x 36" HFor additional information and the full line of equipment, visit www.equipment.loctite.com.95
Page 1 and 2:
theequipmentsourcebook2007volume 6
Page 3 and 4:
Table of ContentsINTRODUCTIONEQUIPM
Page 6 and 7:
Equipment ServiceSolutionsINTRODUCT
Page 8 and 9:
Dispense SystemsDISPENSINGVOLUMETRI
Page 10 and 11:
DISPENSINGDispense SystemsLOCTITE
Page 12 and 13:
DISPENSINGDispense SystemsLoctite
Page 14 and 15:
DISPENSINGDispense SystemsLOCTITE
Page 16 and 17:
Dispense SystemsDISPENSINGTUBE BOND
Page 18 and 19:
Controllers &ReservoirsDISPENSINGMU
Page 20 and 21:
Controllers &ReservoirsDISPENSINGSI
Page 22 and 23:
Controllers &ReservoirsDISPENSINGRE
Page 24 and 25:
Controllers &ReservoirsDISPENSINGLO
Page 26 and 27:
DISPENSINGBOTTLE DISPENSINGLOCTITE
Page 28 and 29:
Hand HeldApplicatorsDISPENSINGLOCTI
Page 30 and 31:
Hand HeldApplicatorsDISPENSINGLOCTI
Page 32 and 33:
DISPENSINGTwo-Part VolumetricDispen
Page 34 and 35:
DISPENSINGTwo-Part Volumetric Dispe
Page 36 and 37:
Two-Part VolumetricDispensingMeter
Page 38 and 39:
Two-Part VolumetricDispensingMeter
Page 40 and 41:
DISPENSINGLoctite® DuraPump Select
Page 42 and 43:
DISPENSINGLoctite® Brand Meter Mix
Page 44 and 45:
DISPENSINGVariable Ratio Systems fo
Page 46 and 47: DISPENSINGHand Held HotMelt Applica
Page 48 and 49: DISPENSINGHand Held HotMelt Applica
Page 50 and 51: Hand Held HotMelt ApplicatorsDISPEN
Page 52 and 53: DISPENSINGBulk Hot Melt SystemsBulk
Page 54 and 55: Bulk Hot MeltSystemsDISPENSINGLOCTI
Page 56 and 57: Bulk Hot MeltSystemsDISPENSINGLOCTI
Page 58 and 59: DISPENSINGLoctite® Brand Extrusion
Page 60 and 61: DISPENSINGHand Held ValvesHand Held
Page 62 and 63: Hand Held ValvesDISPENSINGGENERAL P
Page 64 and 65: Hand Held ValvesDISPENSINGPINCH TUB
Page 66 and 67: DISPENSINGValves & PumpsValves & Pu
Page 68 and 69: Valves & PumpsDISPENSINGLOCTITE ®
Page 70 and 71: DISPENSINGValves & PumpsGENERAL DUT
Page 72 and 73: Valves & PumpsDISPENSINGHIGH VISCOS
Page 74 and 75: DISPENSINGValves & PumpsPOSITIVE DI
Page 76 and 77: Valves & Pumps DISPENSINGLoctite®
Page 78 and 79: DISPENSINGPail PumpsLOCTITE ® HIGH
Page 80: DISPENSINGMonitoring SystemsMonitor
Page 83 and 84: Tapered Dispense Tips1 1 ⁄4" POLY
Page 85 and 86: Loctite® Brand Syringe Accessories
Page 87 and 88: AccessoryPARENT PRODUCTItem Numbers
Page 89 and 90: LOCTITE ® 200 BENCHTOP ROBOT STATI
Page 91 and 92: LOCTITE ® 400 BENCHTOP ROBOT STATI
Page 93 and 94: LOCTITEHeading ® S440 SERIES SCARA
Page 95: MOTIONCONTROLLOCTITE ® ADVANCING S
Page 99 and 100: O-Ring FabricationO-RINGFABRICATION
Page 101 and 102: LIGHT CURE SolutionsPRODUCTItemNumb
Page 103 and 104: LOCTITE ® 7700-HD LED LIGHT SOURCE
Page 105 and 106: Wand SystemsLoctite® ZETA® light
Page 107 and 108: LOCTITE ® ZETA ® 7735 UV WAND SYS
Page 109 and 110: LOCTITE ® ZETA ® 7760 UV WAND SYS
Page 111 and 112: LOCTITE ® ZETA ® 7401 UV CHAMBERI
Page 113 and 114: LIGHT CURE Cure Chambers &Flood Sys
Page 115 and 116: Light MetersDecreased radiant power
Page 117 and 118: Cure ConveyorsLoctite® brand cure
Page 119 and 120: Light SourcesOur light sources and
Page 121 and 122: Index119INDEXFor additional informa
Page 123 and 124: 121INDEXFor additional information
Page 125 and 126: 123INDEXFor additional information
Page 127: 125INDEXFor additional information
show all

equipment sourcebook - Loctite.ph

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?