equipment sourcebook - Loctite.ph

DISPENSING Dispense SystemsCOMPLETE PRESSURE-TIME BOTTLE DISPENSE SYSTEMSLOCTITE ® BOND-A-MATIC ® 3000 DISPENSERItem Numbers: 982719 and 982722The Loctite® Bond-A-Matic® 3000 Reservoir Dispense Systems with applicatorare reliable, low cost pneumatic dispensers for single - component adhesives.The systems arrive ready to dispense, complete with a 2-liter pressure reservoirand a Loctite® Vari-Drop applicator. This item is available with a 0 to 15 psipressure regulator which is well suited for low viscosity (< 3,000 cP) adhesives,and a 0 to 100 psi regulator for higher viscosity (>3,000 cP) adhesives.Features:• Improved dispensing control to eliminate waste,and reduce operator fatigue• PTFE lined, black feed line provides a light and moisture barrierto ensure no- clog dispensing of light sensitive acrylicsand moisture sensitive instant adhesives• Dispensing needle assortment allows you to select the needleto deliver the bead or dot size needed for your application• Easy-to-read pressure gauge• Adjustable pressure regulatorTheory of OperationOperation of this unit is easy. An operator will placea bottle of product directly in the reservoir and tightenthe three handles on the cover. The unit is then pressurizedto the appropriate setting for optimal flow control.The product is dispensed through a hand held Loctite®Vari-Drop Applicator which, when depressed, allowsmaterial to flow. A fully depressed finger switch maximizesflow. By adjusting the flow screw on the finger switch,a consistent flow can be set for repeatable dispensing.TECHNICAL SPECIFICATIONSAir InputClean, dry air not to exceed 125 psig and filteredwith a maximum of 50 micronsAir Output 982719: 0 to 15 psi 982722: 0 to 100 psiProduct Viscosity 982719: 0 to 3,000 cP 982722: >3,000 cPMaximum Distance fromSystem to Dispense Point48 inchesOverall13.125" H x 9.875" W x 14.625" DiameterDimensions InternalReservoir10" H x 5" DiameterWeight18 lbs.Used to DispenseGel Adhesives, Instant Adhesives, Light Cure/Acrylics,Retaining Compounds, ThreadlockersPackage Types & Sizes250 ml bottle / 1 lb. bottle / 1 L bottle2 kg bottle / 200 g squeeze tubeParts Included(1) Loctite ® Bond-A-Matic ® Reservoir with 1 ⁄4" tank fitting(1) Loctite ® Vari-Drop Applicator Kit(1) 1 ⁄4" Feed Line and Spring Strain Relief(1) Anti-Bubble Tip & Sleeve (1) Needle Assortment Kit(1) Tube of Silicone Grease (1) ManualAdditional InformationFor Spare Parts and Accessories, see page 84.For Dispense Tips, see pages 80-81.Additional Accessories Sold Separately984480 – Reservoir Liner 200022 – Empty 1 lb. HDPE BottleFor additional information and the full line of equipment, visit www.equipment.loctite.com.7