equipment sourcebook - Loctite.ph

DISPENSINGPail PumpsLOCTITE ® HIGH VISCOSITY PASTE PUMP SYSTEMSThe Loctite® High Viscosity Paste Pump Systems are specificallydesigned to dispense paste products packaged in 5 gallon opentoppails up to 55 gallon drums. The various pump ratios aresuited for pumping medium to high viscosity paste products. Thehigh viscosity paste pump systems are fully assembled systemsconsisting of an air motor, pump tube, and pressure ram.Features:• Choice of three pump and seal materials –Carbon steel with polyurethane seals, carbon steelwith inert seals, or inert metal• 5 gallon open-top pails or 55 gallon drum capability• 22:1, 44:1, or 64:1 pump ratio versions(liquid to air pressure)Theory of OperationThese units, when configured with the necessary air andproduct hoses, air and fluid regulators, dispense valves,tips and fittings, will pump medium to high paste productsfrom 5 gallon open-top pails up to 55 gallon drums.Typical Fluids Handled and Parts Supplied• Carbon Steel Systems: lubricants, epoxies, urethanes• Carbon Steel Systems (with inert seals):RTV silicones, lubricants, epoxy resins,epoxy hardeners, and urethanes• Inert Metal Systems: lubricants, epoxies, anaerobics,acrylics, light cure acrylics, epoxy hardeners, urethanes,water-based products• Loctite® Brand Parts Supplied -(Highlighted in Purple in Component Diagram Below)(1) Air Motor – 1A(1) Single Post Primer/Follower plate –5 gallon systems – 1D(1) Twin Post Primer/Follower Plate –55 gallon systems – 1C(1) High Viscosity Pump Tube – 1BAdditional InformationSee page 77 to select appropriate hosing, dispense valves, fluidregulators, air filters, dispense tips, and other accessories tocomplete your Loctite® High Viscosity Paste Pump System.Loctite® High Viscosity Paste PumpComponent DiagramNumber designationhighlights item type in theaccessories chart on page 77.6 61A4ItemNumber3 2B 3RatioOutputperStroke5Material6ContainerMaximumProductViscosity (cP)988715 22:1 6.7 in 3 Carbon Steel 55 Gallon 500,000988716 22:1 6.7 in 3 Carbon Steel 5 Gallon 500,000988717 22:1 6.7 in 3 Inert Metal 55 Gallon 500,000988718 22:1 6.7 in 3 Inert Metal 5 Gallon 500,000988843 22:1 6.7 in 3 Carbon Steel w/Inert Seals 5 Gallon 500,000988846 22:1 6.7 in 3 Carbon Steel w/Inert Seals 55 Gallon 500,000988719 44:1 6.7 in 3 Carbon Steel 55 Gallon 1,000,000988720 44:1 6.7 in 3 Carbon Steel 5 Gallon 1,000,000988721 44:1 6.7 in 3 Inert Metal 55 Gallon 1,000,000988722 44:1 6.7 in 3 Inert Metal 5 Gallon 1,000,000988844 44:1 6.7 in 3 Carbon Steel w/Inert Seals 5 Gallon 1,000,000988847 44:1 6.7 in 3 Carbon Steel w/Inert Seals 55 Gallon 1,000,000988723 64:1 4.6 in 3 Carbon Steel 55 Gallon 4,000,000988724 64:1 4.6 in 3 Carbon Steel 5 Gallon 4,000,000988725 64:1 4.6 in 3 Inert Metal 55 Gallon 4,000,000988726 64:1 4.6 in 3 Inert Metal 5 Gallon 4,000,000988845 64:1 4.6 in 3 Carbon Steel w/Inert Seals 5 Gallon 4,000,000988848 64:1 4.6 in 3 Carbon Steel w/Inert Seals 55 Gallon 4,000,00073Manual System61A32A61D1B452B51B673532A33Automatic System(Secondary Pressure Regulation)1CNOTES: 1. Hoses have Female JIC Swivel Fittiings on both ends. 2. ALL Fittings are stainless steel unless otherwise noted.76For additional information and the full line of equipment, visit www.equipment.loctite.com.