equipment sourcebook - Loctite.ph

DISPENSINGValves & PumpsPOSITIVE DISPLACEMENT PUMPLOCTITE ® POSITIVE DISPLACEMENT PUMPItem Number: 983330The Loctite® Positive Displacement Pump features a patented, seal-less design. It is specificallydesigned to dispense Loctite® brand threadlockers and retaining compounds in rotosprayapplications with a high degree of precision. The dispense capability of this pump is 0.02 to 0.4 cc.It has a modular design for easy maintenance. For rotospray applications, it is normally used withthe Loctite® Digital Multi-Function Controller (item 1022006).Features:• Positive displacement• Pneumatically-operated• Designed for compatibility with Loctite® brand rotospray workstations• Modular design of product shut- off valve and valve actuatorprovides on-line serviceability• Cycle rate for low viscosity productsexceeds 120 per minute• Small, easy-to-use design• Adjustable stroke to control the amountof material dispensed• Compatible with a wide range of fluids• Repeatable and consistent delivery of productTypeViscosity RangeTheory of OperationUse the Loctite® Positive Displacement Pump for rotosprayinglow to medium viscosity fluids. Typically, this unit is used inconjunction with a gravity feed reservoir. The gravity feedreservoir will transfer the material from the storage tank tothe pump, which supplies material to the dispensing area.SizeWeightAir InputProduct Line FeedFluid CapacityCycle SpeedDispense PatternsUsed to DispenseStroke AdjustmentSuck-BackValve TypeWetted ComponentsParts IncludedTECHNICAL SPECIFICATIONSPositive Displacement PumpLow to Medium9.15" H x 1.88" D (maximum) / 2.6" W (with connections)1.7 lbs.60 to 90 psi3 ⁄8" OD before pump, 1 ⁄4" OD after pump0.02 to 0.40 cc per shot2 cycles per second maximum (adjustable)DropRetaining Compounds, Threadlockers,Any single-component, non-moisture-curing,low to medium viscosity fluid (