equipment sourcebook - Loctite.ph

HIGH PERFORMANCE DIAPHRAGM VALVESLOCTITE ® LIGHT CURE DISPENSE VALVEItem Number: 98009The Loctite® Light Cure Dispense Valve (item 98009) is a diaphragmvalve that provides high-resolution stroke adjustment andconsistent no -drip repeatable dispensing. It is suitable for all lowto medium viscosity light curable adhesives, but can also be usedfor retaining compounds and threadlockers. It has a small profileand simple design that minimizes space requirements andfacilitates routine preventative maintenance. This valve must beused in conjunction with a Loctite® brand controller, productreservoir and dispense tip, sold separately.LOCTITE ® CYANOACRYLATE DISPENSE VALVEItem Number: 98013The Loctite® Cyanoacrylate Dispense Valve is a diaphragm valvethat provides high-resolution stroke adjustment and consistent,no -drip, repeatable dispensing. It is suitable for all low tomedium viscosity cyanoacrylate adhesives but can also be usedfor retaining compounds and threadlockers. It has a small profileand simple design that minimizes space requirements andfacilitates routine preventative maintenance. This valve must beused in conjunction with a Loctite® brand controller, productreservoir and dispense tip, sold separately.Features of Dispense Valves:• Compact size and weight• Adjustable fluid flow control• Fail safe, air to open, spring close• Positive shutoff, no seals• Bubble -free, no-drip dispensing• Field serviceable• Easy cleaning without valve de-mounting• Cycle rate exceeds 500 per minuteTheory of OperationProduct flows to the dispense valve from the reservoir. Flowrate is adjusted by turning the flow control dial on top of thevalve. The valves can be used in both the stationary oradvancing modes.NO FLOWFLOW98009 – Loctite ® Light CureDispense ValveTECHNICAL SPECIFICATIONSTypeHigh Performance DiaphragmViscosity RangeLow to MediumSize3.090" x 1.060" diameterWeight 4.5 oz. (128 g)Maximum Fluid Pressure70 psiFluid Inlet1 ⁄8" NPTFluid Outlet1 ⁄4"-28 UNF, Tip Adapter, Luer-Lok ® Output FittingAir Inlet Port1 ⁄4" Tube FittingAir Input70 to 90 psiAir CylinderSingle Acting, Spring Return, Stroke Control,Aluminum, Hard Coated FinishDispense PatternsDrop, Dot, Bead, MicrodotUsed to Dispense98009: Light Cure/Acrylics,Retaining Compounds,Threadlockers98013: Gel Instant Adhesives,Retaining Compounds,ThreadlockersStroke AdjustmentYesSuck-BackNoValve TypeDiaphragmWetted Components 98009:Chamber: Acetal CopolymerDiaphragm: Ultra HighMolecular Weight IrradiatedPolyethylene98013: Chamber: Ultra HighMolecular Weight PolyethyleneDiaphragm: Ultra HighMolecular Weight IrradiatedPolyethyleneMounting Hole(1) 10-32 UNFParts Included (1) 5 ft. Air Line Tubing (attached to valve) (1) Needle Kit(1) 6 ft. Product Tubing, 1 ⁄4" OD, PTFE Lined(1) Valve Mount Screw (1) Valve Assembly (1) ManualAdditional Information For Spare Parts and Accessories, see pages 84-85.For Fluid Compatibility Selector Chart, see pages 73-74.For Dispense tips, see pages 80-81.Additional Accessories Sold Separately97123 – Loctite ®Single ChannelAutomaticController97101 –Loctite ® DigitalDispenseController97007 / 97010 –Loctite ® IntegratedSemi-AutomaticControllers97017 / 97020 –Loctite ® IntegratedSemi-AutomaticControllers withLow Level Sensors98013 – Loctite ® CyanoacrylateDispense Valve982726 / 982727 –Loctite ® Bond-A-Matic ® Reservoirs982720 / 982723 –Loctite ® Bond-A-Matic ® Reservoirswith Low LevelSensorsDISPENSING Valves & PumpsThe RED represents the fluid path.1022006 –Loctite ® DigitalMulti-FunctionalController98022 –Loctite ® 300 mlCartridgePusher984691 – Loctite ®AdvancingSlide(2" Stroke)For additional information and the full line of equipment, visit www.equipment.loctite.com.67