equipment sourcebook - Loctite.ph

DISPENSINGDispense Controller and Reservoir arerequired with these valves.Valves & PumpsHIGH PRECISION VALVESLOCTITE ® STATIONARY APPLICATOR VALVEItem Numbers: 97113 and 97114The Loctite® Stationary Applicator Valve is a slim, lightweight, patented, seal-lessdispense valve. It utilizes double-acting, adjustable air to open and close cylinderswhich allows for precise valve sequencing to meet your most stringentpressure-time dispense requirements. This valve also featuresadjustable suck-back to eliminate stringing and dripping, andmodular design providing for on-line serviceability. It is suitablewith all low to medium adhesive viscosities. This valve must be Typeused in conjunction with a Loctite® brand controller, product Viscosity Rangereservoir and dispense tip, sold separately.SizeWeightFeatures:• Slim, lightweight, patented seal-less dispense valve• Modular design of product shut-off valve and valveactuator provides on-line serviceability• Fail safe – spring assisted close• Suck-back feature eliminates product stringing• Double-acting cylinder allows adjustable opening andclosing speed for process control• Cycle rate exceeds 36 per minute• Operational with pressure-time applications• Dispenses fluids up to 15,000 cP (item 97113) or80,000 cP (item 97114)Theory of OperationProduct flows to the dispense valve from the reservoir. Adjustingthe double-acting cylinders allows control of the valve openingand closing rates. Use of the adjustable suck-back featureeliminates dripping and stringing. These valves can be used inboth the stationary or advancing modes.NO FLOWThe RED representsthe fluid path.FLOWTECHNICAL SPECIFICATIONSHigh PrecisionLow to Medium7.6" L x 2.4" H0.75 lbs.Maximum Fluid Pressure80 psiAir Inlet Port5 ⁄32" Tubing FittingAir Inlet60 to 80 psi minuteProduct Inlet 97113: 1 ⁄4" OD Tube 97114: 3 ⁄8" OD TubeFluid Outlet1 ⁄4" UNF, Tip Adapter, Luer-Lok ® Output FittingDispense PatternsDrop, Dot, BeadUsed to DispenseGel Instant Adhesives, Instant Adhesives,Retaining Compounds, ThreadlockersStroke AdjustmentYesSuck-BackYesValve TypePressure-Time DispenseWetted ComponentsAcetal Copolymer, PTFE and PTFE Coated MetalsAir CylinderDouble acting diaphragm cylinder / flow control ofboth ports / spring return for fail safe functionParts Included (1) Feed Line (1) Anti-Bubbler Adapter and Sleeve(1) Dispense Valve (1) Needle Kit (1) ManualAdditional Information For Spare Parts and Accessories, see pages 84-85.For Fluid Compatibility Selector Chart, see pages 73-74.For Dispense Tips, see pages 80-81.Additional Accessories Sold Separately97123 – Loctite ®Single ChannelAutomaticController97101 –Loctite ® DigitalDispenseController1022006 –Loctite ® DigitalMulti-FunctionalController97007 / 97010 –Loctite ® IntegratedSemi-AutomaticControllers97017 / 97020 –Loctite ® IntegratedSemi-AutomaticControllers withLow Level Sensors98022 – Loctite ®300 ml CartridgePusher97115 – Loctite ® Electric Rotorspray982726 / 982727 –Loctite ®Bond-A-Matic ®Reservoirs982720 / 982723 –Loctite ® Bond-A-Matic ® Reservoirswith Low LevelSensors984691 –Loctite ®AdvancingSlide (2" Stroke)65