equipment sourcebook - Loctite.ph

LOCTITE ® PNEUMATIC HAND HELD APPLICATORItem Number: 97112 – Foot Switch ActivatedThe Loctite® Pneumatic Hand Held Applicator (item 97112) is a consistent performing, highlyreliable, adhesive dispensing valve. It is ergonomically designed for comfortable, applicationcontrol. It also incorporates a suck-back feature that prevents dripping or stringing. This valvemust be used in conjunction with a Loctite® brand controller and product reservoir that are footswitch activated. These are sold separately.DISPENSING Hand Held ValvesLOCTITE ® PNEUMATIC HAND HELD APPLICATORItem Number: 97116 – Finger Switch ActivatedThe Loctite® Pneumatic Hand Held Applicator (item 97116) is a consistent performing, highlyreliable, adhesive dispense valve. It features a pneumatic trigger actuator that is ergonomicallydesigned for comfort, application control, and a low actuation force to reduce hand fatigue. Italso incorporates a suck-back feature that prevents dripping or stringing. This valve must be usedin conjunction with a Loctite® brand controller and product reservoir, sold separately.Features of Pneumatic Hand Held Applicators:• Pistol grip provides comfort and control• Low actuation force to reduce hand fatigue• Suck-back feature ensures accuracy and control• Dispenses products up to 15,000 cPwith 1 ⁄4" feed line (standard)• Dispenses products up to 80,000 cPwith 3 ⁄8" feed line (optional)• Operational with manual, semi-automatic,and automatic controllersTheory of OperationBoth hand held applicators are a modular design made up of aproduct shut-off valve and valve actuator. This type of designprovides quick on-line serviceability. The adjustable suck-backfeature eliminates stringing and dripping. The shut-off of allhand held applicators takes place mechanically with the springreturn of the shut-off piston to the rest position. Henkel offers aselection of Loctite® brand product reservoirs that can be usedwith the Loctite® Hand Held Applicators.The RED represents the fluid path.NO FLOWFLOWTECHNICAL SPECIFICATIONSTypePneumaticViscosity RangeLow to MediumSize1.12" D x 5.2" L x 2.74" WWeight 97112: 4.9 oz. (138.9 g) 97116: 12 oz. (340 g)Air Input60 psi min.Product Inlet1 ⁄4 inchWetted ComponentsAcetal Copolymer, PTFE, PTFE Coated MetalDispense PatternsDrop, Dot, BeadUsed to DispenseInstant Adhesives, Light Cure/Acrylics,Retaining Compounds, ThreadlockersStroke AdjustmentNoActuation97112: Foot (Foot switch isnot included with valve, but is97116: Finger(Finger switch is included)included with all controllers)Parts Included(1) Hand Held Applicator (1) Applicator Grip(1) Needle Kit (1) ManualAdditional Information For Spare Parts and Accessories, see pages 84-85.For Fluid Compatibility Selector Chart, see page 63.For Dispense Tips, see pages 80-81.Additional Accessories Sold Separately98022 –Loctite ® 300 mlCartridgePusher982720 / 982723 /982726 / 982727 –Loctite ® Bond-A-Matic ®Reservoirs with Low LevelSensing (97116 only)1022006 –Loctite ® DigitalMulti-FunctionalController(97112 only)97007 / 97010 –Loctite ® IntegratedSemi-AutomaticControllers97101 –Loctite ® DigitalDispenseController(97112 only)97220 – Loctite ® 3 ⁄8" Feed Line Kit97017 / 97020 –Loctite ® IntegratedSemi-AutomaticControllers withLow Level Sensors982721 / 982724 –Loctite ® Bond-A-Matic ®Reservoirs(97112 only)98501 – Loctite ®Applicator HolderFor additional information and the full line of equipment, visit www.equipment.loctite.com.61