equipment sourcebook - Loctite.ph

Loctite® Hysol Bulk Hot Melt System ApplicatorsIn any adhesive application, the accuracy of your dispense equipment can define the level of success of the process.Henkel offers four accurate and convenient styles of dispense applicators to suit any process requirement. Whicheverdispense applicator you choose, it must match the voltage of the melt unit. The 2 hand and mounted styles also come inmultiple coil voltages (24 VDC, 115 VAC, and 230 VAC) to match external control systems if employed.1) Loctite ® Hysol Hand Held Applicator• Convenient, durable, fully insulated, and customizable• Available in top or bottom inlet applicators2) Loctite ® Hysol Mounted Applicator (for automatic or fixed position dispense)• Excellent design for automated applications• Select electrically controlled mounted applicators for dispensing products up to 5,000 cP• Select pneumatically controlled mounted applicators for high cycle rates up to 2,400 cpm• Compact design is easily mounted to a robot or incorporated into a workcell or fixture3) Loctite ® Hysol 2 Hand Applicator• Electrically controlled for precision dispense• Vertical design allows direct positioning over the partDISPENSING Bulk Hot MeltSystemsPRODUCTItem NumberCompatible withthese Melt UnitsMelt Unit VoltageControl CoilVoltage/Item #Loctite ® Hysol Hand Held Bottom InletApplicator98138 98131, 98133 115 VAC N/A98139 98132, 98134, 98135 230 VAC N/ALoctite ® Hysol Hand Held Top InletApplicator98136 98131, 98133 115 VAC N/A98137 98132, 98134, 98135 230 VAC N/A98146 98131, 98133 115 VAC 24 VDC**Loctite ® Hysol Mounted Applicator(Electric – Open/Close)98147 98131, 98133 115 VAC 115 VAC98145 98132, 98134, 98135 230 VAC 24 VDC**98149 98132, 98134, 98135 230 VAC 115 VAC98148 98132, 98134, 98135 230 VAC 230 VAC24 VDC **/986326 †989357 98131, 98133 115 VAC115 VAC/989358 †Loctite ® Hysol Mounted Applicator(Pneumatic – Open/Close)230 VAC/989359 †24 VDC **/986326 †986325 98132, 98134, 98135 230 VAC115 VAC/989358 †230 VAC/989359 †98143 98131, 98133 115 VAC 24 VDC **Loctite ® Hysol 2 Hand Applicator*98140 98131, 98133 115 VAC 115 VAC98144 98132, 98134, 98135 230 VAC 24 VDC**98142 98132, 98134, 98135 230 VAC 115 VAC98141 98132, 98134, 98135 230 VAC 230 VAC*All of the Loctite ® Hysol 2 Hand Applicators require a separateapplicator control cord and either an extrude or spray controlmodule. Select between single switch (only requires onehand to actuate) or two switch (requires two hands to actuate)to control the unit.986884 2 Hand Applicator Cord, 1 Switch986885 2 Hand Applicator Cord, 2 Switch** Choose 24 VDC for use with Event Timers.† Solenoid Valve is required and sold separately.For additional information and the full line of equipment, visit www.equipment.loctite.com.55