equipment sourcebook - Loctite.ph

Bulk Hot MeltSystemsDISPENSINGLOCTITE ® HYSOL BULK-34 SYSTEMItem Number: 98135The Loctite® Hysol Bulk-34 Hot Melt System is a compact andefficient bulk hot melt unit capable of manual or automaticproduct delivered up to 75 lbs./hr. The unit includes all digitalcontrols and displays with simple modular connections forhoses, controllers and timers that are sold separately. These CEcertified units have three independent temperature controlsfor the tank, hosing and dispense valves that will provide aneffective extrusion or spray application for a wide rangeof hot melt adhesives.Features:• Two-channel controls on front panel withfull digital display of set points, temperature rangesand all diagnostic functions• Highly reliable variable speed DC gear pump withintegrated flow control offers consistent productdelivery and extended service life• Capable of up to four, independent and fullycustomizable dispense lines• Up to nine controllable temperature zones over sixindividual ranges for fine tuned temperature control• User selectable standby mode automatically protectsagainst overheating product. This extends product life,lowers energy consumption, and still allows for rapidrestart of the unit• PTFE coated reservoir with high surface area melt grid• CE Certified• Compact footprintTheory of OperationThis unit is designed to melt and dispense hot meltadhesive when outfitted with optional hand held ormountable applicators, for either spray or extrusionapplications. Appropriate dispense controllers, timers,hosing and nozzle accessories are also selected basedon process needs to complete the system.TECHNICAL SPECIFICATIONSVoltage230 VACStandard Tank Capacity34 lbs. (15.4 kg)Optional Tank Feed Hopper100 lbs. (45.4 kg)Used to DispenseAll forms of Loctite ® Hysol ® EVA,Polyamide, PolyolefinMaximum Dispense Rate75 lbs./hr (34.1 kg/hr.)Maximum Temperature Tank Setting395°F (202°C)Maximum Dispense Temperature425°F (218°C)Temperature Control Zones 9ControlsDigitalMaximum Number of Hoses 4Maximum Total Length of Hoses72 feetAvailable Dispense PatternsExtrude, Swirl Spray, Fan Spray, Cone SprayPump Pressure0 to 300 psiDimensions (Lid Open)22.0" L x 14.5" W x 27.0" HWeight (Empty)86 lbs. (39.0 kg)System Power Consumption6600 wattsMelt Tank Power Consumption3400 wattsParts Included(1) Hysol Bulk-34 Hot Melt System(1) Temperature Range Adjustment Tool(1) 10 mm Hex Key for flow by-pass adjustment(1) ManualAdditional InformationSee pages 55-57 to select from the wideassortment of applicators, hoses, nozzles,timers, controllers and accessories to completeyour bulk hot melt dispense system.54For additional information and the full line of equipment, visit www.equipment.loctite.com.