equipment sourcebook - Loctite.ph

DISPENSING Bulk Hot MeltSystemsLOCTITE ® HYSOL BULK-14 SYSTEMItem Numbers: 98133 and 98134The Loctite® Hysol Bulk-14 Hot Melt System is a compact andefficient bulk hot melt unit capable of manual or automaticproduct delivered up to 28 lbs./hr. The unit includes all digitalcontrols and displays with simple modular connections forhoses, controllers and timers that are sold separately. These CEcertified units have three independent temperature controlsfor the tank, hosing and dispense valves that will provide aneffective extrusion or spray application for a wide rangeof hot melt adhesives.Features:• Two-channel controls on front panel with full digitaldisplay of set points, temperature ranges, and alldiagnostic functions• Highly reliable variable speed DC gear pump withintegrated flow control offers consistent productdelivery and extended service life• Capable of two, independent andfully customizable dispense lines• Up to five controllable temperature zones over sixindividual ranges for fine tuned temperature control• User selectable standby mode automatically protectsagainst overheating product. This extends product life,lowers energy consumption, and still allows for rapidrestart of the unit• PTFE coated reservoir with high surface area melt grid• CE Certified• Compact footprintTheory of OperationThis unit is designed to melt and dispense hot meltadhesive when outfitted with optional hand held ormountable applicators, for either spray or extrusionapplications. Appropriate dispense controllers, timers,hosing and nozzle accessories are also selectedbased on process needs to complete the system.TECHNICAL SPECIFICATIONSItem Number 98133 98134Voltage 115 VAC 230 VACStandard Tank Capacity14 lbs. (6.4 kg)Optional Tank Feed Hopper70 lbs. (31.75 kg)Used to DispenseAll forms of Loctite ® Hysol ® EVA,Polyamide, PolyolefinMaximum Dispense Rate28 lbs./hr. (12.7 kg/hr.)Maximum Temperature Tank Setting395°F (202°C)Maximum Dispense Temperature425°F (218°C)Temperature Control Zones 5ControlsDigitalMaximum Number of Hoses 2Maximum Total Length of Hoses 20 feet 48 feetAvailable Dispense PatternsExtrude, Swirl Spray, Fan Spray, Cone SprayPump Pressure0 to 300 psiDimensions (Lid Open)20.2" L x 11.5" W x 22.5" HWeight (Empty)51 lbs. (23.2 kg)System Power Consumption 2220 watts 3860 wattsMelt Tank Power Consumption 900 watts 1700 wattsParts Included(1) Hysol Bulk-14 Hot Melt System(1) Temperature Range Adjustment Tool(1) 10 mm Hex Key for flow by-pass adjustment(1) ManualAdditional InformationSee pages 55-57 to select from the wideassortment of applicators, hoses, nozzles,timers, controllers and accessories to completeyour bulk hot melt dispense system.For additional information and the full line of equipment, visit www.equipment.loctite.com.53