equipment sourcebook - Loctite.ph

Hand Held HotMelt ApplicatorsDISPENSINGHOT MELT BENCH MOUNT AND CONTROLLER OPTIONSLOCTITE ® HOT MELT BENCH MOUNT KITItem Number: 98042LOCTITE ® HOT MELT PNEUMATIC TIMERItem Number: 98043The Loctite® Hot Melt Bench Mount Kit is used for converting theLoctite® Hysol 175-AIR or 175-AIR-HT applicator into a hands-free,bench-top dispenser. The Loctite® Hot Melt Pneumatic Timer is used inconjunction with the Loctite® Hot Melt Bench Mount Kit and Loctite®Hysol 175-AIR and 175-AIR-HT applicator for “controlled” dotdispensing. These units are used for any hot melt application whereholding an applicator is not desirable. This is especially relevant toapplications where the part itself must be moved. Typical applicationsinclude: cardboard boxes and related packaging materials, wood andplastic panels, furniture components, etc.Features:Loctite® Hot Melt Bench Mount Kit• Ready-made bench-top stand easily attaches to theLoctite® Hysol 175-AIR or 175-AIR-HT applicator,and includes a pneumatic actuator and foot switch• Included right angle adapter accepts anyLoctite® brand hot melt nozzleLoctite® Hot Melt Pneumatic Timer• Directly accepts the Loctite® Hot Melt Bench Mount Kit• Programmable timer from 0 to 1 secondfor controlled dot dispensing• Internal pneumatic timing device requiresno electrical connection• Includes a manual mode for set-up and purgingTheory of OperationBy simply pushing the included foot switch, an operator candispense beads or dots of hot melt adhesives onto a partwithout the hindrance of holding the applicator. By usingthe preset timer, each push of the foot switch will dispensea single controlled dot of adhesive.98042 – Loctite ® Hot MeltBench Mount Kit.PRODUCTTECHNICAL SPECIFICATIONSLoctite ® Hot Melt BenchMount Kit98043 – Loctite ® HotMelt Pneumatic Timer.Loctite ® Hot MeltPneumatic TimerItem Number 98042 * 98043Required UtilitiesAir Input: 60 to 100 psiSize 7.8" W x 11.9" Depth x 16.4" H 7.4" W x 7.8" L x 2.75" HWeight 5.4 lbs. 2.6 lbs.Hot Melt ChemistryEVA/PolyamideParts Included (1) Stand with Pneumatic Actuator(1) Right Angle Adapter for Nozzle(1) Foot Switch(1) Manual(1) Pneumatic Timer(1) ManualAdditional Information For Hot Melt Nozzles and Accessories, see page 49.* Note: Applicators are sold separately.48For additional information and the full line of equipment, visit www.equipment.loctite.com.